B.Tech Electronics & Communication Engineering Colleges in Maharashtra

The total tuition fees at Maharashtra Institute of Technology for B.Tech is? 3.4L - 4.7L, the fees varies between each course and its specilisation.You can check shiksha website or college webiste to get mot up to date information about MIT.There are in total 120 seats offered and the highest package offered this year was 80 lpa. 

While comparing the COEP and JSPMU, it is seen that the admission process of both is pretty same. The students must have passed 12 Class with a science stream to get admission in both. Both the universities accept exams like JEE/MHT CET for taking admission in BTech. The JSPM university offers 11 specialised subjects with approximately 1140 seats, while COEP offers 10 specialised subjects with approximately 758 seats. But the score requirements for entrance test are different in both the universities. COEP is a government university, the competition is higher to get admission, while in JSPM university the admission is easy as it is merit based.

If we look at the market demand, no doubt there is huge demand for BTech (Full Form: Bachelor of Technology) graduates among top recruiters who are constantly looking for skilled and knowledgeable students with fresh ideas to enhance their business growth and profitability.

Having said that, a few previous-year employment reports published by the Business Standard and Times of India suggest that students found it a struggle to land a high-paying job after completing BTech because of a lack of industry-specific skills and knowledge and cut-throat competition between Lacs of engineering students hunting for a job.

Hence, it is very important for students to focus on enhancing their skill set according to industrial demands and technological advancements, stay updated regarding all industry trends, build good networks and, most importantly, take up internships to gain experience and stand out in front of the employer.

Read more: B Tech Jobs in India

Don Bosco Institute of Technology (DBIT) in Mumbai is generally considered a Tier 2 engineering college. While it has a solid reputation for infrastructure, faculty, and industry contacts, it is not one of India's top Tier 1 universities, such as the IITs or NITs. DBIT is noted for its strong emphasis on technical education and excellent placement chances with businesses such as TCS, Infosys, and L&T recruiting alumni. The college also provides good practical experience through projects and internships however its rankings and recognition place it in the Tier 2 category of engineering universities.

BTech courses entail many engineering branches, ranging from traditional fields like BTech in CSE,  Civil Engineering,  ECE,  IT,  Electrical Engineering,  and Mechanical Engineering to surging domains such as AI & ML and Robotics. Students can check the list of career options available after completing BTech course from Priyadarshini College of Engineering:

Job Profiles	Job Description	Average Salary Range
Solar/Wind Energy Engineer	Design, develop, and optimize solar and wind energy systems and technologies	INR 6 - 18 LPA
Energy Systems Analyst	Analyze and optimize the performance of energy systems, including renewable and traditional sources	INR 7 - 16 LPA
Sustainability Engineer	Develop and implement sustainable engineering solutions to reduce environmental impact	INR 7 - 15 LPA

JD College of Engineering and Management concluded its placement drive for the batch passing out in 2024 with 81.01% placement rate. As per the latest report, the the highest and average package offered during JD College of Engineering and Management placements in 2024 was INR 10 LPA and INR 3.5 LPA, respectively. The key highlights of JD College of Engineering and Management placements for the Class of 2023 and 2024 are tabulated below:

Particulars	Placement Statistics (2023)	Placement Statistics (2024)
the highest package	INR 10 LPA	INR 10 LPA
Average Package	INR 3.5 LPA	INR 3.5 LPA
Placement rate	81.30%	81.01%
Internships	516	737

Sanjay Ghodawat University B.Tech AI and Machine Learning eligibility:

Candidates who have passed the Diploma in Engineering & Technology & obtained at least 45% marks (40% marks for Backward class, EWS & PWD candidates belonging to Maharashtra State only) can also apply. Maharashtra State Candidates must have to appear MHT-CET (should have appeared in all the subjects in MHT-CET).

The flagship courses offered at PVG's College of Engineering and Technology and G.K. Pate (Wani) Institute of Management are B.Tech, M.E./M.Tech, MBA/PGDM. The Institute has experienced faculty offering the best education to students. On the basis of Shiksha verified reviews, PVG's College of Engineering and Technology and G.K. Pate (Wani) Institute of Management has a rating of 3.6 by students. The college's campuslife, placements, faculty and Infrastructure has been rated as 3.7, 3.6, 3.8 and 3.2 as per reviews by students.

The BTech Mechanical Engineering syllabus is not the same across all colleges, as every college committee sets a particular coursework pattern at the start of every academic year to be followed for the respective batch. The syllabus includes some core subjects, interesting electives, and lab work that gives detailed knowledge to the students about the workings of the field. 

The fees range for courses offerred by the Annasaheb Dange College of Engineering and Technology is around INR 180000 - INR 372556.

D.K.T.E. Society's Textile and Engineering Institute has a well-supported campus with facilities like The library has a collection of 21806 books. Library provides the facility of photocopying, electronic book search and a reading room. The library is a member of DELNET, British Council Library and Shivaji University Library. Additionally, it has been rated 4.11 for infrastructure by the verified students on Shiksha platform.

Yes, Indian national candidates must pass HSC or its equivalent examination with Physics and Mathematics as compulsory subjects along with one of the Chemistry or Biotechnology or Biology or Technical Vocational subject or Computer Science or Information Technology or Informatics Practices or Agriculture or Engineering Graphics or Business Studies with at least 45% aggregate (40% aggregate, in case of Backward class categories and Persons with Disability candidates belonging to Maharashtra State only) in the above subjects taken together to apply for BTech course. The preference shall be given to the candidate obtaining non-zero positive score in JEE Mains Paper-I over the candidates who obtained a non-zero score in MGMU-CET/ MHT CET/ PERA CET. Aspirants who have passed Diploma in Engineering and Technology with at least 45% aggregate 40% aggregate, in case of Backward Class categories and Persons with Disability candidates belonging to Maharashtra State only) can also apply for the BTech course. 

Yes, Amrutvahini College of Engineering offers decent placements to its BTech courses annually. Check out the key highlights of Amrutvahini College of Engineering placements for the overall Class of 2024 and 2025 in the table below:

Particulars	Placement Statistics (2024)	Placement Statistics (2025)
the highest package	INR 8.5 LPA	INR 8.8 LPA
Total placements	715	486

Chhatrapati Shahu College of Engineering is a reputed institute for B.Tech, M.E./M.Tech. Students can opt these programs to pursue their career in Engineering, IT & Software. Institute has trained & experienced faculty who deliver these programs. Chhatrapati Shahu College of Engineering has a review rating of 4.5 on the basis of reviews by students. In addition to this, it has been rated 4.3 on campuslife, 4.4 on placements, 4.7 on faculty and 4.7 on Infrastructure.

Tulsiramji Gaikwad-Patil College of Engineering and Technology offers various courses in technology and management. The fees for various courses may vary depending on the type and level of the program. TGPCET BTech fees is around INR 3.58 Lacs. Admission to the BTech course is based on entrance exams such as JEE Main, MHT CET, etc. Candidates can apply online on the official website for the desired course. 

MESCE-Modern Education Society’s College of Engineering falls in the category of Tier II engineering institutes located in India. Even though it is a quality college with somewhat reasonable infrastructure. It is not placed on the same pedestal as Tier 1 colleges, like the IITs or NITs. Specialized programs, experienced faculty, and good placement chances are some factors for which MESCE is famous, but not for the generalized engineering branch. Nevertheless, for those learners who wish to enter one of the best universities and be awarded with national status – there are other options. However, MESCE is still an option for a candidate who wants quality engineering training in an environment that does not frustrate them.

As per information available, Modern Group of Colleges has recorded (aprx) INR 300,000 median salary to students for M.E./M.Tech course during placements.

The seat intake for BTech CSE at SNDT College is 60. BTech programme is offered via the SNDT's affiliated college Mittal Institute of Technology (UMIT). BTech admission is based on candidates' performance in the national and state-level entrance exams such as JEE Main and MH CET.  Computer Science & Technology, Electronics & Telecommunication, Information Technology, Computer Engineering, Data Science, and, Artificial Engineering are the BTech specialsiations offered.

As per Shiksha verified reviews, Nutan College of Engineering and Research has an impressive review rating of 4.36 by 29 students.

The cutoff for DES Pune University hasn't been declared yet. However, I can help you know about the admission process by DES Pune University. For different courses, DES Pune University has its own entrance exam known as DES UCET/PCET . The exam will carry 25 general aptitude questions and 25 program-specific questions. There will be no penalty for an incorrect answer. Online personal interaction will also carry 50 marks ¹. Most cases accept standardized entrance test scores for programs like B.Tech, MBA, PGD, and PGC . Current cut-off and admissions for the universities are also available on the official websites of the respective universities, and the students can directly contact the universities to inquire about the admissions in the universities .

The fees range for courses offerred by the Padmabhushan Vasantdada Patil Pratishthan College of Engineering is around INR 229684 - INR 568000.

In general, the faculty at Genba Sopanrao Moze College of Engineering (GSMCOE) is comprehensively regarded as adequately qualified and experienced. Many professors are Masters degree holders (M.Tech., Ph.D.) in their own fields, and they carry both theoretical knowledge and practical experience in the class. The institution trains very well with the relevant theoretical knowledge and encourages practical application of knowledge by organizing workshops, seminars, and industry interaction sessions. 

As with most institutions, the quality of teaching varies from department to department and depending on the individual faculty member. Overall, it adds up to GSMCOE continuously improving its quality of teaching through the professional development of faculty and its interaction with industry.

As per Shiksha verified reviews, Pune District Education Association's College of Engineering has an impressive review rating of 2.93 by 62 students.

DBATU offers four years B.Tech programs in following specializations with their seats:

B.Tech. Chemical Engineering (60 seats)
B.Tech. Computer Science and Engineering (60 seats)
B.Tech. Electrical Engineering (60 seats)
B.Tech. Electronics & Telecommunication Engineering (60 seats)
B.Tech.  Information Technology (60 seats)
B.Tech. Mechanical Engineering (60 seats)
B.Tech. Petro Chemical Engineering (60 seats)
B.Tech. Civil Engineering (60 seats)