B.Tech Production Engineering Colleges in India

According to Shiksha verified reviews, for the faculty Birla Vishvakarma Mahavidyalaya have rating of 4.18. It represents that Institute has good, qualified and experienced faculty members.

UIT RGPV Bhopal accepts JEE Main scores, followed by a counselling process for admission to the BTech courses. As per the UIT RGPV cutoff 2023, the last round closing rank for BTech ranged between 65225 and 309741, among which CSE was the most competitive specialisation. The Round 1 and the Last Round closing rank for BTech in CSE stood at 64215 and 65225, respectively for the General All India category candidates. 

Refer to the table given below to check out the last round closing ranks for all the BTech specialisations offered at UIT RGPV. 

Course	Last Round (Closing Rank)
B.Tech. in Computer Science and Engineering	65225
B.Tech. in Electronics and Communication Engineering	106880
B.Tech. in Automobile Engineering	283137
B.Tech. in Civil Engineering	220497
B.Tech. in Electrical and Electronics Engineering	114391
B.Tech. in Mechanical Engineering	155975
B.Tech. in Information Technology	95369
B.Tech. in Petro Chemical Engineering	309741

Yes, Alliance University does offers BTech in mutiple sepcialisations. The BTech is a four-year course divided into eight semesters. The UG-level course is offered in seven specialisations via the Alliance College of Engineering & Design. Some of the BTech specialisations are Computer Science & Engineering, Aerospace Engineering, Mechanical Engineering, Information Technology, Information Technology (Data Analytics), etc. Additionally, the university also provides lateral entry to the BTech courses. Alliance University BTech admission 2024 is open now.

Velammal Engineering College cutoff 2024 has been released for admisison to the BE/ BTech courses. Admission to BE/ BTech is based on a valid TNEA scores, followed by a counselling process. As per the TNEA Round 1 cutoff 2024, the closing ranks ranged between 17369 and 25764 for the students belonging to the General AI category. The Round 1 TNEA cutoff for BTech in CSE course is 25764. So, considering the Round 1 closing ranks, if a candidates seeking admission to CSE at the Velammal Engineering College in Round 1 must secure a rank up to 25764. This is for students who belong to the General AI category, as the cutoff varies for different courses and categories.  

Candidates can refer to the table below to check out the category-wise TNEA round 1 cutoff 2024 for the Computer Science and Engineering:

Category	TNEA Round 1 Closing Rank 2024
General	25764
OBC	54053

Yes, Amrutvahini College of Engineering has a good record of placements for BTech, M.Tech and MBA courses. The key highlights of Amrutvahini College of Engineering placements for Class of 2024 and 2025 are tabulated below:

Particulars	Placement Statistics (2024)	Placement Statistics (2025)
the highest package	INR 8.5 LPA	INR 8.8 LPA
Total placements	715	486

The average BTech CSE salary for graduates in India can range between INR 4 LPA and INR 12 LPA. The scope of the BTech CSE programme in India is excellent and hence the starting salary packages offered by recruiters are also high as compared to some other engineering courses.

The salary depends on factors like the years of experience you hold, your academic qualification, skill set, etc. Once you enter the industry and get some years of experience in hand, you will get a higher salary package. But, in the starting of your career journey, you can expect between INR 4 LPA and INR 6 LPA.

JEE Main Registration 2024 session 2 last date was March 4. NTA released JEE Main 2024 Application form session 2 on February 2. JEE Main Application form 2024 session 2 was available online on the official website jeemain.nta.ac.in. Candidates who have applied for JEE Main 2024 session 1 had not register again. Such candidates only need to fill the paper details (BE/BTech or BArch/BPlan) and pay application fees. JEE Main 2024 registration last date session 2 was March 4.

Sree Chitra Thirunal College of Engineering accepts KEAM entrance rxam scofes for admission to the Engineering courses. RSET KEAM cutoff 2024 has been released where in the Round 2 closing ranks varied between 4481 and 15037 for the students belonging to the General Home-State quota. The toughest course to get into Sree Chitra Thirunal College of Engineering was Computer Science and Engineering, followed by Electronics and Communication Engineering and Computer Science and Engineering (Artificial Intelligence and Machine Learning)

Candidates can refer to the table below to check out the KEAM Round 2 closing ranks for all the BTech courses offered at Sree Chitra Thirunal College of Engineering for the students beloning to the General Home State quota:

Course	2024
B.Tech. in Electronics and Communication Engineering	6566
B.Tech. in Computer Science and Engineering	4481
B.Tech. in Mechanical Engineering	15037
B.Tech. in Biotechnology and Biochemical Engineering	13746
B.Tech. in Computer Science and Engineering (AI and Machine Learning)	6685

As per Shiksha verified reviews, Shivajirao S. Jondhale College of Engineering (SSJCOE) has an impressive review rating of 2.37 by 60 students.

The BTech Mechanical Engineering syllabus is not the same across all colleges, as every college committee sets a particular coursework pattern at the start of every academic year to be followed for the respective batch. The syllabus includes some core subjects, interesting electives, and lab work that gives detailed knowledge to the students about the workings of the field. 

Dr Mahalingam College of Engineering and Technology offers good placements annually for its BTech, M.Tech and MCA courses. The key highlights of Dr Mahalingam College of Engineering and Technology placements for the Class of 2023 and 2024 are tabulated below:

Particulars	Placement Statistics (2023)	Placement Statistics (2024)
the highest package	INR 8.50 LPA	INR 13 LPA
Average package	NA	INR 4.80 LPA
Total recruiters	95	190
Total students on roll	919	792
Total students placed	615	472
Placement percentage	79%	78%

Note: The placements are going on for the academic year 2023-2024. The above-mentioned data may vary once the placement report 2024 is out.

Yes, Shivaji University admissions are open for some programmes. Students can apply online at the official site. The forms have to be filled properly before submission. Students need to apply before the last date of admission.

Opening and Closing rank depends on the category and quota of candidates. For COMEDK Round 2 cutoff 2023, the opening rank was 71183 and closing rank was 77070 for the general category candidates under All India quota. Cut off are different when it comes to other categories or female candidates and even domicile of home state. Admission to Computer Science Engineering in PDA College of Engineering is based on the scores obtained in the COMEDK entrance exam. Applicants are advised to confirm what category are they applying while checking for cut offs.

{Source: B.E. / B.Tech students & alumni}

Course Curriculum

* Relevant and prepares students for the industry (students)
* Set by Osmania University and focuses on making students industry-ready (multiple students)
* Good and relevant curriculum (some students)

Teaching Quality

* Faculty members are knowledgeable and helpful (multiple students)
* Teaching quality is good and easy to understand (one student)
* Some teachers are excellent and make students feel comfortable (one student)

Industrial Readiness

* Course curriculum makes students industry-ready (students)
* Students are prepared to work directly in the industry (one student)

Note: These points summarize the common themes that emerged from the students' reviews regarding the course curriculum at Deccan College of Engineering and Technology. The answer is based solely on the provided information and does not include any additional data or research.

Nirmala College of Engineering is a good institution for After 10th Diploma, MBA/PGDM, B.E. / B.Tech courses, and these programs are delivered by highly experienced faculty. Major specialisation at Nirmala College of Engineering are Automobile Engineering, Chemical Engineering, Civil Engineering, Mechanical Engineering, Electronics & Communication Engineering, Production Engineering, Computer Science Engineering, Mechatronics Engineering, Food Technology.

Karmaveer Bhaurao Patil College of Engineering or in short KBPCOE is known to be a better place for an engineering degree. It provides several undergraduate and postgraduate programs with an emphasis on professional experience. The college practices moderate infrastructure and facilities such as Laboratories and Libraries. Also, through the placement records, one gets to see that majority of its student gets placed in well established companies in every sector. It is still wise to look for certain things as certain experiences can differ.

The average BTech CSE salary for graduates in India can range between INR 4 LPA and INR 12 LPA. The scope of the BTech CSE programme in India is excellent and hence the starting salary packages offered by recruiters are also high as compared to some other engineering courses.

The salary depends on factors like the years of experience you hold, your academic qualification, skill set, etc. Once you enter the industry and get some years of experience in hand, you will get a higher salary package. But, in the starting of your career journey, you can expect between INR 4 LPA and INR 6 LPA.

Admission to Vidya Academy of Science and Technology (VAST) under B.E./B.Tech will be possible through management quota for students not opting for the entrance exam KEAM. As a result, one must satisfy all eligibility criteria-10+2 in Physics, Chemistry and Mathematics-and pay the required fees.

Konkan Gyanpeeth College of Engineering provides programmes including B.E. / B.Tech in streams such as Engineering, and are excellent for students to build their careers. The institute has specializations in Computer Science Engineering, Telecommunication Engineering, Information Technology, Instrumentation Technology, Mechanical Engineering, Production Engineering, Electronics & Communication Engineering.

Lukhdhirji Engineering College is a well-known institution for M.E./M.Tech, UG Diploma, After 1th Diploma, B.Tech courses. These programs are delivered by highly experienced faculty. As per Shiksha verified reviews, Lukhdhirji Engineering College has a rating of 3.8 on the basis of reviews by students. Not just this, it has also been rated 3.9 on campuslife, 2.9 on placements, 4 on faculty and 4 on Infrastructure.

As per Shiksha verified reviews, Shantilal Shah Engineering College has an impressive review rating of 2.94 by 147 students.

The overall seats available across all courses offered by Malabar College of Engineering & Technology, Wadakancherry is up to 477. Good thing to know is that Malabar College of Engineering & Technology, Wadakancherry has courses which are approved by prominent Government bodies like AICTE.

St. Peter's Institute of Higher Education and Research provides programmes including M.Sc, M.Com, MBA/PGDM, M.A, B.E. / B.Tech, B.A, B.Sc, B.Com, BBA, BCA, B.Arch, M.E./M.Tech in streams such as Science, Mass Communication & Media, Accounting & Commerce, Business & Management Studies, Humanities & Social Sciences, Engineering, IT & Software, Architecture & Planning, and are excellent for students to build their careers. The institute has specializations in Mathematics, Physics, Chemistry, Biochemistry, Computer Science, Biotechnology, Microbiology, Visual Communication, Aeronautical Science, Business Analytics, English, Aeronautical Engineering, Transport & Logistics, Biotechnology Engineering, Electronics & Communication Engineering, Computer Science Engineering, Biomedical Engineering, Communications Engineering, Information Technology, Power Engineering, Structural Engineering, Civil Engineering, Electrical Engineering, Mechanical Engineering, Operations.

Assam Science and Technology University eligibility criteria require students to complete the last qualifying exam. The minimum aggregate also varies depending on the course and specialisation. In addition, students are advised to also go through the selection criteria of the offered course before applying as admissions are mainly entrance-based. Students can check the following points to know about the ASTU eligibility criteria:

• ASTU UG admission requires students to pass Class 12 or equivalent from a recognised board
• ASTU PG admission requires students to complete graduation in a relevant field from a recognised university
• For ASTU PhD admission, students must complete postgraduation in a relevant field along with having the specified experience/ certifications