Information Technology colleges in Maharashtra

Bharati Vidyapeeth College of Engineering offers a BTech in Mechanical Engineering which is a 4 year programme offered with an annual intake of 120 students. The Institute offers admission to the respective course based on Class 12 or its equivalent examination with Physics and Mathematics as compulsory subjects along with one of the Chemistry/ Biotechnology/ Biology/ Technical Vocational subject/ Computer Science/ Information Technology/ Informatics Practices/ Agriculture/ Engineering Graphics/ Business Studies/ Electronics/ Entrepreneurship. Candidates must have obtained at least 45% (at least 40% marks, in case of  Economically Weaker Section belonging to Maharashtra State only) in the above subjects taken together are eligible to apply. In addition to this, candidate must have appeared in all the subjects in MHT-CET and should obtain non zero score in MHT-CET.

K. K. Wagh Institute of Engineering Education and Research is a very renowned institute in Maharashtra, India, with quality engineering education and research. It was established in 1990 and offers various undergraduate and postgraduate programs in engineering, management, and applied sciences.

RGIT, MHT CET Cutoff 2024 for the LOPENH Category is listed below. The overall cutoff percentile for MHT CET is 84.52 - 95.72

The Rajiv Gandhi Institute of Technology in Mumbai utilizes scores from the Maharashtra Common Entrance Test (MHT CET) for admissions into its Bachelor of Technology (BTech) programs. The cutoff scores for the 2024 admissions cycle will be published by the State Common Entrance Test Cell of the Government of Maharashtra during the MHT CET counseling process scheduled to occur tentatively between July and August 2024.

Students must submit the following documents for Universal College of Engineering course admissions:

• Class 10 and Class 12 Marksheets.
• JEE Mains or MH CET scorecard.
• School/College leaving certificate.
• Birth Certificate/Passport (for Indian candidates).
• Physical Fitness certificate.
• Passports sized photographs (5 copies).
• Gap year affidavit (if applicable).

Students may also be required to submit other documents such as Undertaking for interim fees, Notarised compliance affidavit, etc.

JSPM Wagholi is heavily invested in the academic lives of its students. Students receive multiple avenues of exposure through the Training and Placement Cell's events, trainings, workshops, lectures, among other things. During the 2025 placement cycle, 202 job offers were received by students.

The highest package during JSPM BSIOTR placements have reached as high as INR 40 LPA. The top recruiters include Accenture, TCS, Capgemini, Hexaware, Tech Mahindra, Bajaj, Amazon, Wipro, Avaada, Cognizant, GE Aviation.

The average M.Tech CSE salary for fresh postgraduate students is somewhere between 4 and 7 Lakh. For mid-senior level positions, the salary range is slightly higher on the basis of the experience and skills acquired by the individuals over a few years. Their salary would be between INR 7 LPA and INR 10 LPA. For senior-level management positions, the salary in the CSE field is more than INR 10 LPA and can go up to INR 20 LPA as well because of the demand for CSE professionals in this age of digitalization.

Yes, Modern College of Engineering at the Progressive Education Society provides a range of undergraduate scholarships to encourage both financial need and academic achievement. If students meet certain qualifying requirements they can apply for scholarships via government programs like EBC (Economically Backward Class) and scholarships for students in reserved categories like SC, ST and OBC. Scholarships may also be awarded to deserving students under their academic standing on prior tests. Additionally, the college helps students seek government and private scholarships. For qualified students, these programs lessen the financial load, allowing them to concentrate more on their academics.

GHRCEM Jalgaon offers admission to courses based on entrance scores. The college shortlists candidates for BTech, MBA, BCA, MCA and M.Tech is based on entrance exam scores. The college accepts scores in JEE Main, MHT CET, MBA CET, MAH BCA CET, etc. Besides, selection in B.Tech lateral entry programmes is based on the qualifying exam scores of the candidate. Once selected, candidates can participate in CAP with a valid score in the entrance exam. 

Government College of Engineering, Nagpur is a public institute that provides various programmes. The institute is affiliated with RTM University, Nagpur. The popular programmes are the Bachelor of Engineering (BE) and Master of Technology (MTech) courses. The institute is accredited by the NAAC with Grade B+ certification and has a 11.97-acre campus.

GATE exam is the eligibility entrance exam for Ph.D at Government college of engineering amravati (GCOEA). Their is no qualifying cutoff marks for Ph.D at Government college of engineering amravati.You must pass in post graduation and GATE exam with High percentage.

The seats availability for offered courses at MET League of Colleges, Bhujbal Knowledge City, Nashik goes up to 1648. Courses offerred by MET League of Colleges, Bhujbal Knowledge City, Nashik are approved by eminent Government bodies such as AICTE, PCI.

Shri Guru Gobind Singhji Institute of Engineering and Technology has been rated 3.9 for faculty as per reviews by students. This represents that Institute has decent, qualified and experienced faculty members.

G H Raisoni Institute of Engineering and Technology has a Faculty review rating of 3.98 by students. This represents that Institute has decent, qualified and experienced faculty members.

The university refunds fees in case of withdrawal or cancellation of admission. Candidates can check below the fee refund policy at Chhatrapati Shivaji Maharaj University: 

Percentage of Refund of Fees	Point of time when notice of withdrawal of admission is received in the HEI
100%	15 days or more before the formally notified last date of admission.
90%	Less than 15 days before the formally notified last date of admission.
80%	15 days or less after the formally notified last date of admission.
50%	30 days or less, but more than 15 days after formally notified last date of admission.
00%	More than 30 days after formally notified last date of admission.

St. Francis Institute of Technology, SFIT, has managed to earn a position among the good engineering colleges in Mumbai for quality teaching, infrastructure and placement opportunities for students. It may not be on top at all times, but the institution is always good enough in terms of student satisfaction as well as campus recruitments. SFIT is basically an institute with engineering orientation and most of them prefer it for internship programs for students afterwards being placed in industries. However, whether this is the best depends upon individual preference, as there are other top colleges like IIT Bombay, VJTI, and Sardar Patel Institute of Technology, which also hold high regard in Mumbai.

Government Polytechnic, Mumbai is a good institution for UG Diploma, Certificate, PG Diploma, After 10th Diploma courses, and these programs are delivered by highly experienced faculty. Major specialisation at Government Polytechnic, Mumbai are AutoCAD, Video Editing (Post Production), Industrial Engineering, Sound Engineering, Electronics Engineering, Electrical Engineering, Communications Engineering, Civil Engineering, Information Technology, Computer Science Engineering, Instrumentation Technology, Mechanical Engineering, Rubber Technology.

The median salary granted to students upon a successful placement from the A. P. Shah Institute of Technology is INR 0.5 LPA, indicating the institution's commitment to fostering prosperous career beginnings, with graduates receiving a commendable financial remuneration.

Priyadarshini College of Engineering has been rated 4.3 for faculty as per reviews by students. This shows that Institute has qualified and experienced faculty members. Priyadarshini College of Engineering is known for its excellent faculty who have obtained their Master's and Doctorate degrees from prestigious Institutes of India and other reputed national and international universities.

Environ Speciality Chemicals, Awasthi Construction Co, Mohan Breweries & Distilleries Ltd, Surecom Media, Xrbia Ltd, Hakimi Techology Solutions, Rd Constro Tech, Sociaty For Elementry Volunteer Action (Seva), Syneos Healthcare, Excelling 3Dp Pvt Ltd, Kirloskar Integrated Technologies Ltd, Capgem, Gokulnath, Clansys India Pvt Ltd, Gujarat Multi Gas Base Chemicals, Vilas Rajapkar Consultancy ( Opc ) Pvtltd, Grab India

Hi.Indira College of Engineering and Management is a well-known institution for MBA/PGDM, B.E. / B.Tech, M.E./M.Tech, MCA courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, Indira College of Engineering and Management has a rating of 3.83 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 3.81 on Campus Life, 3.39 on Placements, 4.35 on Faculty and 3.86 on Infrastructure.

Thanks 

In general, the faculty at Genba Sopanrao Moze College of Engineering (GSMCOE) is comprehensively regarded as adequately qualified and experienced. Many professors are Masters degree holders (M.Tech., Ph.D.) in their own fields, and they carry both theoretical knowledge and practical experience in the class. The institution trains very well with the relevant theoretical knowledge and encourages practical application of knowledge by organizing workshops, seminars, and industry interaction sessions. 

As with most institutions, the quality of teaching varies from department to department and depending on the individual faculty member. Overall, it adds up to GSMCOE continuously improving its quality of teaching through the professional development of faculty and its interaction with industry.

A. C. Patil College of Engineering is a good institution for Ph.D, B.E. / B.Tech, MMS courses, and these programs are delivered by highly experienced faculty. Major specialisation at A. C. Patil College of Engineering are Computer Science Engineering, Electrical Engineering, Mechanical Engineering, Information Technology, Artificial Intelligence & Machine Learning, Electronics Engineering.

While both of the colleges are really good colleges for pursuing MBA, SIBM can be considered as the better college for completing MBA amongst both of the colleges. Both colleges provide great placement opportunities to their students but PIBM a higher placement rate than Dholi Patil College of Engineering. As of last year the highest package offered at Dholi Patil College of Engineering was INR 7 LPA and at SIBM was 35 lpa. SIBM also has a higher rate of placement than Dholi Patil College of Engineering. However every candidate has their own needs and requirements and can have a good anlaysis of both the colleges according to his requirements.

Don Bosco Institute of Technology, Mumbai provides programmes including MMS, B.E. / B.Tech in streams such as Business & Management Studies, Engineering, and are excellent for students to build their careers. The institute has specializations in Computer Science Engineering, Telecommunication Engineering, Information Technology, Mechanical Engineering.

According to Shiksha verified reviews, for the faculty Walchand Institute of Technology have rating of 4.26. It represents that Institute has good, qualified and experienced faculty members.