M.Tech colleges accepting GATE in Pune

The GATE counselling process starts after the announcement of results. The GATE counselling is conducted by COAP and CCMT. The COAP (Common Offer Acceptance Portal) is the counselling portal that offers admission to IITs.

While CCMT (Centralised Counselling for MTech/M.Arch/M.Plan) is the counselling portal that offers admission to NITs, IIITs, and other GFTIs. 

COAP 2026 counselling registrations are ongoing. Round 1 counselling will begin on May 11. 

No, the Graduate Aptitude Test in Engineering examination takes place once a year. Every year, different IITs and IISc conduct exam on rotational basis. GATE is conducted online for three hours for 30 branch papers. 

IIT Guwahati has released GATE 2026 cutoff mark on its official page. Candidates who have appeared exam, can check qualifying marks now. The GATE passing mark differs for each branch paper.

GATE 2026 CSE cutoff (category-wise) can be checked here -

The cutoff is the minimum mark that is required for all candidates to qualify for the exam. IIT Guwahati announced GATE result 2026 on March 19. 

Symbiosis Institute of Technology intakes around 90 students to do M.Tech for various branches.

M.Tech Courses	Intake
M.Tech Artificial Intelligence and Machine Learning	30
M.Tech. Automotive Technology	30
M.Tech Robotics and Automation	18
M.Tech Embedded Systems	18
M.Tech Geoinformatics & Surveying Technology	18

The Graduate Aptitude Test in Engineering (GATE) results are used to determine admission to SIT Pune's M.Tech programme, which is then followed by counselling. Those who have taken the GATE exam can apply online at SIT Pune's official website.

The Indian Institute of Technology Guwahati conducted GATE 2026 exam. The exam dates along with branch-wise exam dates was released on official website - gate2026.iitg.ac.in. The entrance test was held in two shifts -

• Forenoon - 9:30 am to 12:30 pm
• Afternoon - 2:30 pm to 5:30 pm

This year, IIT Guwahati is conducting GATE 2026, and two things have been modified - 

• The GATE fees have been revised for all categories
• A new sectional paper has been introduced, called Energy Science (under Engineering Sciences).

The details are available on the official website as well as in the information brochure. 

Yes, MIT WPU is a good college for MTech taking its infrastructure, faculty and placements into account. However the students must be prepared for the challanges posed by the academic environment. 

Here's what current and former students have to say:

Pros:

* Autonomous college with well-qualified and knowledgeable faculty members (almost all PhD holders)
* Industry-exposed courses with a focus on practical applications
* Good opportunities for internships (90% of students got one) with companies like Tata Communications Ltd, Emerson, Philips, etc.
* Faculty members are supportive and willing to help students
* State-of-the-art infrastructure with modern facilities
* Cultural and technical events like Gandharva, Aavishkar, Robocon, Hackathon, etc. for overall development

Cons:

* Placements for M.Tech students are limited compared to undergraduate programs
* No WiFi access for students (only for faculty members)
* Canteen options could be improved
* Limited space for conducting lectures in some cases

Conclusion:
While VIIT Pune offers a strong foundation for pursuing higher education, particularly in engineering, students considering the institution for M.E./M.Tech must weigh the pros and cons carefully. While the college excels in providing industry exposure, supporting faculty members, and good infrastructure, it falls short when it comes to placements for postgraduate students. It's essential to research and evaluate the college's performance in recent years before making an informed decision.

DY Patil Pune ME placements have been concluded by the institute for the year 2023 and according to the official website of the institute, a total of 1,037 students got placed. DY Patil Pimpri ME the highest package was INR 70 LPA and the lowest package was INR 2.40 LPA. Some of the major recruiters were Microsoft, Publicis Sapient, Kickdrum, Barclays etc.

Note: This information is sourced from official website/ sanctioning body and is subject to change.

In the absence of ME-specific placement, generic placement data has been taken.

It is a reputed engineering college in Pune. As per the latest placement statistics for 2023, over 1,215 offers are made. The highest package offered was INR 40 LPA, which was given by Adobe. Further, many top companies such as Capgemini, TCS, Cognizant, and Accenture offered jobs to RSCOE 2023 passing batch.

AIT Pune cutoff for admission to the BE course was concluded after Round 1 of JEE Main Seat Allotment result in 2019. Considering the AIT Pune closing ranks for BE since 2019, candidates can expect closing rabks for BE to range between 53637 and 113592 for General category. Going as per cutoff 2019, JEE Main Round 1 Seat Allotment, the closing rank for AIT Pune B.E. in Information Technology was 65295. Hence, candidates with the range of rank upto 65295 can apply for AIT Pune IT Department. For more details regarding AIT Pune cutoff, click here. 

The M.Tech course is intended to educate students with the information and abilities necessary to succeed in their chosen profession of engineering. Master of Technology, abbreviated M.Tech, is a two-year professional technical degree programme. It is done following the completion of the BTech/BE or BSc. Each institute has its unique M.Tech curriculum. 

MTech subjects are divided into core and optional subjects. Core subjects are required, whereas optional topics are chosen by students from a list of possibilities based on their interests. The subjects heavily depend on the specialisation of M.Tech Chosen by the students. 

You can visit their website for full dettail and accurate answer.

MIT ADTU offers courses at the UG and PG levels. Admission to the respective courses is offered on the basis of merit and accepted entrance exams. Therefore, candidates must secure a minimum aggregate in Class 12 and graduation for admission to UG and PG level programmes. The University offers respective courses at the total tuition fees varying from INR 28.5 K to INR 13 Lakh. 

As per the official website of DY Patil College of Engineering, 20% of the seats are reserved for the college management. The students seeking admission to these seats are advised to contact the admission cell in charge for more details on this. If a student is not sure about the marks and admission via different rounds, it is better to take admission after the fourth round only or before the second round.

In school of Designing pune the all out understudies consumption for MTECH is around 486.For affirmation in MTECH at COEP the stduents ought to be celigible in Entryway, MHTCET M.Tech and College Degree with half total.

The ME/MTECH is long term degree program and COEP Pune M.Tech affirmations depend on MHT CET M.Tech scores followed by guiding. those competitors who don't have a legitimate score or rank in Door or MHT-MTech are not qualified for admission to M.Tech courses of the School of Designing Pune (COEP).

All India Shri Shivaji Memorial Society's College of Engineering is a well-known institution for B.E. / B.Tech, M.E./M.Tech courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, All India Shri Shivaji Memorial Society's College of Engineering has a rating of 4 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 4.24 on Campus Life, 3.63 on Placements, 4.14 on Faculty and 4.06 on Infrastructure.

Indira College of Engineering and Management cutoff 2024 was concluded for admission to the BE/BTech courses, on the basis of JEE Main scores. The cutoff was released for different categories belonging to the All India quota. The last round closing ranks varied between 93945 and 317464, for the General All India category candidates. 

Among the OBC All India quota candidates, the cutoff was closed between 111320 and 274830, in which B.E. in Computer Engineering was the most desirable specialisation. Checkout more details on Indira College of Engineering and Management cutoff here.

The flagship courses offered at All India Shri Shivaji Memorial Society's Institute of Information Technology are B.Tech, M.E./M.Tech. The Institute has experienced faculty offering the best education to students. On the basis of Shiksha verified reviews, All India Shri Shivaji Memorial Society's Institute of Information Technology has a rating of 4.2 by students. The college's campuslife, placements, faculty and Infrastructure has been rated as 4.4, 4, 4.3 and 4.1 as per reviews by students.

As per Shiksha verified reviews, Nutan Maharashtra Institute of Engineering and Technology has an impressive review rating of 4.34 by 63 students.

IIIT Pune offers admission to MTech courses in various specialisations for a period of two years, divided into four semesters. Admissions for MTech are based on securing at least 60% marks in Class 12 and appearing for the GATE exam and then sitting for CCMT Counselling process. Refer to the list below to know the various branches available

1. MTech Computer Science and Engineering( Artificial Intelligence)
2. MTech Electronics and Communication Engineering (Internet of Things)

Smt. Kashibai Navale College of Engineering provides programmes including B.E. / B.Tech, M.E./M.Tech, MBA/PGDM in streams such as Engineering, Business & Management Studies, and are excellent for students to build their careers. The institute has specializations in Computer Science Engineering, Mechanical Engineering, Electronics Engineering, Information Technology, Electronics & Communication Engineering, VLSI Design.

SITS - Sinhgad Institute of Technology and Science offers Degree courses including 6 UG and 2 PG courses. These programs are offerred in Full Time mode. SITS - Sinhgad Institute of Technology and Science has specializations such as M.E./M.Tech specializations in VLSI Design, B.Tech specializations in Computer Science Engineering, Civil Engineering, Information Technology, Electronics Engineering, Mechanical Engineering.