M.Tech in Electronics Engineering colleges in Karnataka

Students cannot get direct admission to any course at NIT Surathkal. It is compulsory to give the entrance exam to take the admission. Different courses have different entrance tests like JEE Main, GATE etc. Students should check the official website for more information on the entrance test. 

The PES University CSE average package or other placement details are yet to be released. However, the combined placement data for BTech and MTech courses are released in the NIRF report 2023. The key highlights of PES University placements 2022 for BTech and MTech are mentioned below:

Particulars	BTech Placement Statistics (2022)	MTech Placement Statistics (2022)
Total students	1,360	109
Students placed	1,184	89
Placement rate	87%	82%
Median package	INR 7.50 LPA	INR 4.80 LPA

NOTE: The above details are fetched from the NIRF report 2023.

Yes, Siddaganga Institute of Technology offer internship opportunities to its students annually. A total of 500 paid internship opportunities were offered to the students of the 2025 batch during the recent Siddaganga Institute of Technology placements. Tje total no. of internships offered between 2022 and 2025 are presented below:

Particulars	Placement Statistics (2023)	Placement Statistics (2024)	Placement Statistics (2025)
No. of internships (paid)	350	400	500

Total tuition fee of M.Tech programme at BMS College of Engineering is between INR 1.28 lakh - INR 5 lakh. This fee only covers the total fee of tuition and does not include the hostel fee or the mess fee. Fee information is sourced from unofficial sources and is indicative. If you want to take admission in the M.Tech programme at BMS College of Engineering, you need a minimum of 50% in their BE/BTech. Make sure you clear the GATE/PGCET exam, which is used as the selection process for admission to the MTech course.

JSS Science and Technology University offers good placement for its BE course annually. As per the latest report, the overall the highest and median package offered during JSS Science and Technology University placement 2024 stood at INR 60 LPA and INR 9 LPA. The key highlights of JSS Science and Technology University placements for the overall Class of 2024 are tabulated below:

Particulars	Placement Statistics (2024)
the highest package	INR 60 LPA
Median package	INR 9 LPA
Total recruiters	400+
Total offers	800+

At School of Engineering and Technology, M.Tech is available for only in ECE, ML, Civil department. In each department, equal number of seats are available. 30 seats are there in each in each department, so, total numbar of seats are 90.

Eligibility criteria -Students must have 55% in Graduation Degree. With a qualifying GATE score and graduation percentage you can qualify for M.Tech at School of Engineering and Technology.

Meerut Institute of Engineering & Technology (MIET) is a reputable institution that Meerut provides a higher level of education of quality. It was founded in 1997 and it is under the management and governance of the City Educational and Social Welfare Society. The institute is located in the Dr. APJ Abdul Kalam University- AKTU (previously Uttar Pradesh Technical University) and provides a course that is accredited by the All India Council of Technical Education-AICTE, New Delhi. It has the NAAC accreditation of a B+ Grade. The National Board of Accreditation (NBA) is also accredited by MIET. The AMC Engineering College has a good placement record. The college has a good record in placement as well and students have been placed successfully in top companies. 90 percent of the students have been placed at AMC Engineering College and the highest package is 50 LPA.

The important subjects might vary slightly depending on the university as every university follow a certain set of guidelines when it comes to their coursework, but common topics covered in the course usually remain almost the same that include
]Advanced Algorithms and Data Structures
]Software Engineering Principles
]AI and ML
Computer Networks and Distributed Systems
Database Management Systems
Computer Architecture and Organization

You also get to choose from a variety of elective subjects in the second year as per your interests and career goals.

Know more about -

MTech Courses

Sir M. Visvesvaraya Institute of Technology B.E. fee is INR 7 Lacs - INR 20 lakh. Candidates are required to pay the tuition fees for each academic year separately. Additionally, candidate applicants also have to pay the non-refundable application fee.

Yes, SJC Institute of Technology has a decent record of placements for courses like MBA, BTech, MCA, etc. As per the latest report, 87 recruiters visited the campus for SJC Institute of Technology placement 2025, and offered over 684 jobs to the students of the batch 2025. The key highlights of SJC Institute of Technology placements for the Class of 2025 are tabulated below:

Particulars	Placement Statistics (2025)
the highest package	INR 12 LPA
Average package	INR 4.5 LPA
Total recruiters	87
Total offers	684
Total single job offers	449
Placement rate	89%

IISC Bangalore cutoff 2024 has been released for admission to the MTech programmes. For the General AII India category candidates, the round 1 closing rank ranged between 350 and 665, among which Mechanical Engineering is the most competitive specialisation. For OBC category, the round 1closing rank is 624 for the same specialisation. 

Candidates can refer to the table below to check out the IISC Bangalore GATE COAP cutoff 2024 for Round 1: 

Course	2024
M.Tech. in Computational and Data Science	600
M.Tech. in Mechanical Engineering	665
Master of Management Studies (MMS)	– / –
M.Tech. in Chemical Engineering	350
M.Tech. in Mobility Engineering	640
M.Tech. in Computer Science and Engineering	– / –
M.Tech. in Electrical Engineering	650
M.Tech. in Microelectronics and VLSI Design	625
M.Tech. in Signal Processing	621
M.Tech. in Earth and Climate Sciences	500
M.Tech. in Electronic Systems Engineering	625
M.Tech. in Instrumentation Systems	500
M.Tech. in Semiconductor Technology	500
M.Tech. (Research) in Product Design and Manufacturing	500
M.Des. in Product Design and Manufacturing	– / –
M.Tech. in Artificial Intelligence	600
M.Tech. in Smart Manufacturing	400
M.Tech. in Bioengineering	600
M.Tech. in Electronics and Communication Engineering	550
M.Tech. in Electronic Product Design	550
M.Tech. in Quantum Technology	600
M.Tech. in Robotics and Autonomous Systems	550

The eligibility criteria for Amrita School of Engineering Bengaluru M.Tech CSE is to secure a minimum 60% or CGPA 6.0 in B.E. / B.Tech. / M.Sc. in Engineering or Sciences discipline. The degree should be of relevance to the opted M.Tech. programme.  Further, candidates will be admitted based on the GATE score and Non-GATE qualified students will be admitted based on academic records and performance in interview. Candidates with a valid eligibility criteria & performance in the interview will be admitted to the first year of the two-year M.Tech programmes.

SJCE Mysore offers programmes at UG, PG and doctoral levels in the Engineering, Management and Science streams. The courses include BE, MBA, MTech, MCA, etc. Aspirants need to pass a minimum of Class 12 for UG and graduation for PG programmes. The selection to all the courses is entrance-based. 

Approximately 10000 students can do M.Tech at university Visvesvaraya College of Engineering. The M.Tech program at University Visvesvaraya College of Engineering (UVCE) in Bangalore has a duration of 2 years. The college offers 22 M.Tech specializations for engineering aspirants. To pursue an M.Tech. degree at UVCE, candidates must have a Bachelor's degree in Engineering or Technology from a recognized university and a valid GATE score or qualify in the PGCET (Post Graduate Common Entrance Test).

Dr Ambedkar Institute of Technology (AIT), Bangalore are different percentage criteria for diferent courses. The institute offers one course at UG level and three courses at PG level. Here's a table explaining the percentage criteria of different programmes at Dr Ambedkar Institute of Technology (AIT), Bangalore:

Course	Eligibility
B.E.	Class 10 and Class 12 or equivalent with English as one of the languages with 50% aggregate in Physics and Mathematics along with Chemistry and Biology
M.Tech	Graduation from a recognised institute/university
MBA	Graduation from a recognised institute/university
MCA	Graduation from a recognised institute/university

 

The institute has not released the GSSS Institute of Engineering and Technology for Women the highest package for the recent placements. However, the other placement statistics are out, which are mentioned below:

Particulars	Placement Statistics (2023)
Total offers	710
No. of Dream offers	183
No. of Super Dream offers	18

The flagship courses offered at SSIT - Sri Siddhartha Institute of Technology are B.Tech, MCA, M.E./M.Tech. The Institute has experienced faculty offering the best education to students. On the basis of Shiksha verified reviews, SSIT - Sri Siddhartha Institute of Technology has a rating of 4 by students. The college's campuslife, placements, faculty and Infrastructure has been rated as 4.3, 3.2, 4.1 and 4.4 as per reviews by students.

The important subjects might vary depending on the university as every university follow a certain set of guidelines when it comes to their coursework, but common topics covered in the M.Tech Civil Engineering course usually remain almost the same that include:
• Structural Dynamics
• Advanced Concrete Technology
• Finite Element Analysis
• Rock Mechanics and Earth Pressure
• Soil Dynamics and Machine Foundations
You also get to choose from a variety of elective subjects as per your interests and career goals. Further, you can also pursue a major in a particular branch of Civil Engineering like Structural Engineering, Hydraulics and Water Resources Engineering, Geotechnical Engineering, etc.

know more about -

Civil Engineering Subjects

The fees range for courses offerred by the APS College of Engineering is around INR 130780 - INR 360240.

The cutoff trend for BTech at CIT - Channabasaveshwara Institute Of Technology has been increasing in the recent years. In 2022, the closing rank for BTech. under general category for all India quota was 54167. In 2023, it increased to 73264. Likewise, the cut off ranks have changed from 54167 to 73264 for OBC 54167 to 73264 for SC 54167 to 73264 for ST 54167 to 73264 for EWS 54167 to 73264 for PWD. This trend is likely to continue in the coming years, as the demand for engineering education in India continues to grow. Similar cut off trend can be seen for female candidates under all categories however the ranks are slightly different.