IIITDM Kurnool Cutoff 2018: Category-wise JEE Main Cutoff Ranks
IIITDM cutoff 2018 has been released for three BTech based on JEE Main scores followed by the JoSAA Counselling up to Round 6 and then by CSAB Counselling up to two additional rounds
IIITDM Kurnool cutoff is released for various categories including General, OBC, SC, ST, EWS and PwD. The following article gives information regarding the category-wise cutoff for All India Category seats. To learn about the latest and preceding years' category-wise cutoffs for IIITDM Kurnool, refer to the table mentioned below:
- IIITDM Kurnool Cutoff 2018 for General All India Category
- IIITDM Kurnool Cutoff 2018 for OBC All India Category
- IIITDM Kurnool Cutoff 2018 for SC AII India Category
- IIITDM Kurnool Cutoff 2018 for ST AII India Category
- IIITDM Kurnool Cutoff 2018 for Person with Disability (PWD) All India Category
- IIITDM Kurnool Cutoff 2018 FAQs
IIITDM Kurnool Cutoff 2018 for General All India Category
IIITDM Kurnool cutoff 2018 has been released for three BTech specialisations. As per JEE Main cutoff, Round 1 closing ranks ranged between 23642 and 27481, whereas the last round closing ranks ranged between 33827 and 38539. Of all the specialisations, BTech Computer Engineering stood out as the most competitive rank. Tabulated below the round 1 and the last round closing ranks for IIITDM Kurnool BTech cutoff 2018 for the General Category All India candidates:
| Course Name |
Round 1 |
Last Round |
|---|---|---|
| Computer Engineering |
23642 |
33827 |
| Electronics and Communication Engineering with specialization in Design and Manufacturing |
27481 |
36300 |
| Mechanical Engineering with specialization in Design and Manufacturing |
28651 |
38539 |
Commonly asked questions
Indian Institute of information technology design and manufacturing Kurnool is an institutute of National importantance. Established by government of India.
As this institute is completely government funded institute there will be a huge competition among the aspirants to get admission in this college. So one should qualify JEEMainswith a good percentile to get admission in this prestigious institute. Placements were very good and the faculty were very knowledgeable ones. Overall teaching and research field at this institute is up to the mark.
So, to get admission in this college a percentile of 94+ is needed to get a good branch in this institute. Nearly 94 percentile requires 135+ marks in JEE mains.
IIITDM Kurnool cutoff 2025 offered BTech and BTech Integrated courses via the JEE Main exam. The institute has released the cutoff for all rounds and categories belonging to the All India category.
For the General AI category, admissions were closed at a rank of 94749. Hence, these students need to attain a rank of at least 94749 to be eligible for admission.
On the other hand, the OBC AI category students needed to have a rank below 103216. The SC and ST All India categories needed a rank below 204100 and 244049, respectively. Students who belong to the EWS and PWD AI quota need a rank below 102838 and 880508, respectively.
With JEE Mains 2025 cutoff rank of 7000, your chances of getting admitted to IIITDM Kurnool are high if you belong to the General AI category. B.Tech in Computer Science and Engineering qualifying rank according to the last round stands at 39803 for the students belonging to the General AI category. If you belong to the OBC category, All India quota, you can still avail this course with its last round closing rank being 50248. Please note that other categories and rounds will have different cutoffs entirely.
No, you cannot get into IIITDM Kurnool in the first round with a rank of 40K if you belong to the OBC AI category. For this category, the IIITDM Kurnool JEE Main cutoff 2026 was published for the first round for admission to the BTech course and its various specialisations.
For the OBC AI category, the round 1 cutoff ranged from 12462 to 16882, wherein BTech CSE was the toughest course for admission. Candidates with a rank of 40K have to wait till later rounds for the cutoff to get a little more lenient. Till then, see the table below to know the highest round 1 cutoff rank for various branches.
| Course | IIITDM Kurnool JEE Main cutoff 2026 |
|---|---|
| B.Tech. in Computer Science and Engineering | 12462 |
| B.Tech. + M.Tech. in Electronics and Communication Engineering | 14435 |
| B.Tech. in Artificial Intelligence and Data Science | 14529 |
| B.Tech. in Electronics and Communication Engineering (Design and Manufacturing) | 14760 |
| B.Tech. + M.Tech. in Computer Science and Engineering | 14907 |
| B.Tech. + M.Tech. in Artificial Intelligence and Data Science (Dual Degree) | 15433 |
| B.Tech. in Mechanical Engineering (Design and Manufacturing) | 16870 |
| B.Tech. + M.Tech. in Mechanical Engineering | 16882 |
IIITDM Kurnool Cutoff 2018 for OBC All India Category
The most competitive rank was BTech Computer Engineering followed by BTech Electronics and Communication Engineering with specialization in Design and Manufacturing with not much of a difference in closing ranks for Round 1. Tabulated below is the round 1 and the last round closing ranks for IIITDM Kurnool cutoff 2018 for the OBC category candidates:
| Course Name |
Round 1 |
Last Round |
|---|---|---|
| Computer Engineering |
8734 |
12729 |
| Electronics and Communication Engineering with specialization in Design and Manufacturing |
9273 |
12958 |
| Mechanical Engineering with specialization in Design and Manufacturing |
10134 |
13555 |
IIITDM Kurnool Cutoff 2018 for SC AII India Category
For the SC category, BTech CE closed at 4127 for Round 1, whereas BTech Electronics and Communication Engineering with specialization in Design and Manufacturing stood at 5231, making it the most competitive and the least competitive specialization of all. Tabulate below is the round 1 and the last round closing ranks for IIITDM Kurnool cutoff 2018:
| Course Name |
Round 1 |
Last Round |
|---|---|---|
| Computer Engineering |
4127 |
7890 |
| Electronics and Communication Engineering with specialization in Design and Manufacturing |
5231 |
7908 |
| Mechanical Engineering with specialization in Design and Manufacturing |
4784 |
8210 |
Commonly asked questions
IITDM Kurnool JEE Main cutoff 2025 concluded with the release of the final round cutoff list for admission to various BTech specialisations. For the General AI category, the overall cutoff ranged from 30326 to 94749.
In the table below, students can find the cutoff range for different categories according to the closing ranks of the first and last round.
| Categories | JEE Main Cutoff Range 2025 |
|---|---|
| General | 30326 - 94749 |
| OBC | 11442- 103216 |
| SC | 4445 - 204100 |
| ST | 2237 - 244049 |
| EWS | 4803 - 102838 |
| PWD | 1618 - 880508 |
The eligibility criteria for M.Tech and Indian Institute of Information technology design and Manufacturing Kurnool is
Students who are qualified GATE can apply to the M.Tech programs offered in the institute through CCMT admission link.
Candidates should have minimum 60% marks (or CGPA 6.5 on a 10-point scale) for Gen/EWS/OBC-NCL whereas 55% marks (or CGPA 6.0 on a 10-point scale) for SC/ST/PwD in the B.Tech/B.E degree aggregate of all semesters/years.
For the General AI Quota, the last round cutoff score varied from 407 to 413, wherein M.Tech in Artificial Intelligence & Data Science proved to be the toughest specialisation to get a seat in, with the cutoff score being 413. IIITDM Kurnool cutoff 2025 has been released according to the GATE examination scores, followed by the CCMT counselling process for admission to M.Tech and its various specialisations. Please note that the cutoff scores will vary based on categories, rounds, and specialisation.
M.Tech in Artificial Intelligence & Data Science at IIITDM Kurnool, last round cutoff 2025 is 413 for students belonging to the General All India Quota. This is the most sought-after course specialisation at IIITDM Kurnool for this year. For the OBC AI quota, the same course had a cutoff score of 360. For students belonging to the SC category All India quota accepting score is 327. Students can check the table below for the first and the last round closing scores.
Category | First round closing score 2025 |
|---|---|
General | 502 |
SC | 341 |
OBC | 445 |
ST | 256 |
EWS | 436 |
Category | Last round closing score 2025 |
|---|---|
General | 413 |
SC | 327 |
OBC | 360 |
ST | 258 |
EWS | 377 |
IIITDM Kurnool Cutoff 2018 for ST AII India Category
As per the JoSAA and CSAB Counselling IIITDM Kurnool BTech cutoff 2018 has been released for the ST All India Category. During the IIITDM Kurnool admissions to BTech Electronics and Communication Engineering with specialization in Design and Manufacturing stood at 2398 for round 1, making it the most competitive specialisation for this category as well. Tabulated below are the Round 1 and the Last Round closing ranks for IIITDM Kurnool cutoff 2018 based on JEE Main ranks:
| Course Name |
Round 1 |
Last Round |
|---|---|---|
| Computer Engineering |
2807 |
4096 |
| Electronics and Communication Engineering with specialization in Design and Manufacturing |
2398 |
3510 |
| Mechanical Engineering with specialization in Design and Manufacturing |
2533 |
3087 |
IIITDM Kurnool Cutoff 2018 for Person with Disability (PWD) All India Category
The closing ranks for this particular category ranged between 821 and 1190 for the round 1 and between 1190 and 1593 for the last round. Tabulated below are the Round 1 and the Last Round closing ranks for IIITDM Kurnool cutoff 2018 for PwD category All India candidates:
| Course Name |
Round 1 |
Last Round |
|---|---|---|
| Computer Engineering |
908 |
1524 |
| Electronics and Communication Engineering with specialization in Design and Manufacturing |
821 |
1593 |
| Mechanical Engineering with specialization in Design and Manufacturing |
1190 |
1190 |
IIITDM Kurnool Cutoff 2018 FAQs
Q. What is IIITDM Kurnool cutoff 2018?
A. Tabulated below the round 1 and the last round closing ranks for IIITDM Kurnool BTech cutoff 2018 for the General Category All India candidates:
| Course Name |
Round 1 |
Last Round |
|---|---|---|
| Computer Engineering |
23642 |
33827 |
| Electronics and Communication Engineering with specialization in Design and Manufacturing |
27481 |
36300 |
| Mechanical Engineering with specialization in Design and Manufacturing |
28651 |
38539 |
Q. What is IIITDM Kurnool cutoff 2018 for ST category candidates?
A. Tabulated below are the Round 1 and the Last Round closing ranks for IIITDM Kurnool cutoff 2018 based on JEE Main ranks:
| Course Name |
Round 1 |
Last Round |
|---|---|---|
| Computer Engineering |
2807 |
4096 |
| Electronics and Communication Engineering with specialization in Design and Manufacturing |
2398 |
3510 |
| Mechanical Engineering with specialization in Design and Manufacturing |
2533 |
3087 |

News & Updates
Contact Details
Address
Jagannathagattu Hill, Dinnedevarapadu Village
Kurnool ( Andhra Pradesh)
Other Popular IIITs
Get details of Similar Colleges
Student Forum
Answered a week ago
IIITDM Kurnool rankings 2026 are not out yet & will be updated once out. As per India Today 2025, the ranking of the institute is #28 in the Engineering (Government) category, and #57 under Engineering.
P
Contributor-Level 9
Answered 3 weeks ago
IIITDM Kurnool has collaborated with various colleges and universities. IIITDM Kurnool has signed MoUs with several organisations and industries. The below-mentioned table reflects on the IIITDM Kurnool collaborations:
| IIITDM Kurnool Collaborations | ||
|---|---|---|
| IIM Visakhapatnam | Mtab Technology Pvt Ltd, Chennai | Samsung R&D, Bangalore |
| Edurekha and E&ICT Academy, NIT Warangal | E&ICT Academy, NIT Warangal | ZeroCode, Hyderabad |
Oracle India Pvt Ltd, Hyderabad | CloudMOOL, IIT Madras | Centilian Networks Pvt Ltd, Hyderabad |
P
Contributor-Level 9
Answered 4 weeks ago
IIITDM Kurnool JEE Main cutoff 2026 was declared for admission to the BTech course branches for the first round. The cutoff was published for different All India categories in the form of ranks.
For the General AI category, the round 1 cutoff range from 32055 to 47510. As per this range, BTech CSE w
N
Contributor-Level 10
Answered 4 weeks ago
The IIITDM Kurnool CSE cutoff 2026 was 32055 for the General AI category in the first round. The IIITDM Kurnool JEE Main cutoff 2026 was released for the first round for different All India categories and BTech course branches.
Check the list below to know the round 1 cutoff rank for other AI catego
N
Contributor-Level 10
Answered a month ago
Admission in IIITDM Kurnool is completely entrance-based. Applicants should fulil the course-specific eligibility before applying for admission. The college considers valid score of JEE Main and GATE for BTech and M.Tech admission respectively. Following this, candidates have to participate in JoSAA
R
Contributor-Level 10
Answered a month ago
Yes, IIITDM Kurnool is advisable for students focused on design and manufacturing-centric engineering. It focusses on hands-on learning, closer faculty access and are ready to be proactive about internships and placements. It's a good long-term investment for the right interests. Candidates should c
R
Contributor-Level 10
Answered a month ago
Candidates can check below the IIITDM Kurnool fees for various courses in the below table:
| Course | Total tuition fees |
|---|---|
BTech | INR 7 lakh |
MTech | INR 2.9 lakh |
PhD | INR 1.4 lakh |
Note: The information is taken from official website and is subject to change.
R
Contributor-Level 10
Answered a month ago
IIITDM Kurnool application fee for PhD and postgraduate programmes is INR 500 for general/OBC/EWS candidates and INR 250 for SC/ST/PwD candidates. The application fee is payable online. For BTech admissions, candidates must pay the fee as per JEE Main/JoSAA guidelines.
R
Contributor-Level 10






