5 Photos
Central Institute of Tool Design M.E./M.Tech Courses and Fees 2025
- Public/Government Institute
- Estd. 1968
Last updated on 14 Nov '25Central Institute of Tool Design M.E./M.TechWhat's new?
Central Institute of Tool Design MTech admissions 2025-26 are open. Candidates can apply online on the official institute's website.
Central Institute of Tool Design Overview
Table of contents- Central Institute of Tool Design M.E./M.Tech Eligibility and Highlights 2025
- Central Institute of Tool Design M.E./M.Tech Popular courses
- Central Institute of Tool Design M.E./M.Tech Fees details 2026
- Central Institute of Tool Design M.E./M.Tech Admission dates 2026
- Central Institute of Tool Design M.E./M.Tech Seats 2025
- + 3 more items
Central Institute of Tool Design M.E./M.Tech Eligibility and Highlights 2025
M.E./M.Tech at Central Institute of Tool Design is a full time course offered at the PG level. It is of 2 years duration. The students who are Class 12 or equivalent exam pass from a recognised board are eligible for admission. After selection, the candidates must pay the admission fee amount to confirm their seat. The students can check the below table for more details:
Return on InvestmentTotal Tuition Fees₹ 1.3L - 1.5L
Commonly asked questions On Highlights
Q: How is the faculty at Central Institute of Tool Design?
A:
Central Institute of Tool Design has been rated 4.09 for Faculty as per the Shiksha verified reviews by students. This represents that Institute has decent, qualified and experienced faculty members.
Q: How is the placement facility at Central Institute of Tool Design?
A:
As per Shiksha verified reviews, Central Institute of Tool Design has an impressive review rating of 3.7 by 29 students.
Q: What is the fees range for courses offerred by the Central Institute of Tool Design?
A:
The fees range for courses offerred by the Central Institute of Tool Design is around INR 18000 - INR 154500.
Q: What specializations do Central Institute of Tool Design offer in their courses?
A:
Central Institute of Tool Design is a good institution for PG Diploma, Certificate, M.E./M.Tech, After 10th Diploma courses, and these programs are delivered by highly experienced faculty. Major specialisation at Central Institute of Tool Design are Mechatronics Engineering, Embedded Systems & VLSI, Mechanical Engineering, Pro E, Tool Engineering, Robotics Engineering, Electronics & Communication Engineering.
Central Institute of Tool Design M.E./M.TechPopular courses
Filter
Specialization
Exams Accepted
Total Fees
Streams
4 More
Showing 4 Courses
25
- – / –
– / –
₹1.34 L
25
- – / –
– / –
₹1.34 L
24
- – / –
– / –
– / –
Commonly asked questions On All Courses
Q: What are the courses that Central Institute of Tool Design offers?
A:
Central Institute of Tool Design provides programmes including PG Diploma, Certificate, M.E./M.Tech, After 10th Diploma in streams such as Engineering, IT & Software, and are excellent for students to build their careers. The institute has specializations in Mechatronics Engineering, Embedded Systems & VLSI, Mechanical Engineering, Pro E, Tool Engineering, Robotics Engineering, Electronics & Communication Engineering.
Q: What is the intake for offered courses at Central Institute of Tool Design?
A:
The seats availability for offered courses at Central Institute of Tool Design goes up to 539. Courses offerred by Central Institute of Tool Design are approved by eminent Government bodies such as AICTE.
Central Institute of Tool Design M.E./M.TechFees details 2026
| Fee components | Amount (for 2 years) |
|---|---|
₹ 1.34 L - 1.54 L | |
₹ 1.34 L - 1.54 L |
These are estimated fees information. Actual values may differ.
Commonly asked questions On M.E./M.Tech Fees
Q: Is Central Institute of Tool Design a good college/Institute?
A:
Central Institute of Tool Design is a well-known institution for PG Diploma, Certificate, M.E./M.Tech, After 10th Diploma courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, Central Institute of Tool Design has a rating of 3.89 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 3.98 on Campus Life, 3.7 on Placements, 4.09 on Faculty and 3.81 on Infrastructure.
Recommended Colleges
Explore popular similar colleges
Students who showed interest in Central Institute of Tool Design - M.E./M.Tech also showed interest in
Want better recommendations?
There is a 90% more chance of getting best college recommendations by sharing preferences.Confused about which college or exam to opt for?
- Chat with our counselor
- Get your personalised list of colleges & exams matching your preferences
View allCollections
Is this recommendation relevant?
Central Institute of Tool Design M.E./M.TechAdmission dates 2026
| Dates | Past Events |
|---|---|
14 Oct '25 | M.E./M.Tech Spot Admission |
19 Sep '25 | M.E./M.Tech Counselling and admission |
Central Institute of Tool Design M.E./M.TechCentral Institute of Tool Design M.E./M.Tech Seats 2025
Central Institute of Tool Design M.E./M.Tech offers 99 seats. The applicants are admitted as per the sanctioned intake only. Candidates can have a look at the table below to get an idea of the Central Institute of Tool Design M.E./M.Tech seat intake:
99
Total Seats AvailableStudents like you also explore these online M.E./M.Tech courses
₹60 K
2 years
₹2.1 L
3 years
₹3.07 L
2 years
– / –
24 months
₹1.68 L
3 years
View all courses
Central Institute of Tool Design M.E./M.TechComparison with similar colleges
Compare M.E./M.Tech at Central Institute of Tool Design with other similar colleges
| College | Median Salary | Total Tuition Fees | Ranking |
|---|---|---|---|
| -/- | ₹ 1.34 L - 1.54 L | -/- | |
| ₹ 4.2 LPA | ₹ 2.1 L - 3 L | -/- | |
| ₹ 3 LPA | ₹ 1 L | -/- | |
| ₹ 3.8 LPA | ₹ 1.3 L | -/- | |
| ₹ 4.2 LPA | ₹ 1.45 L - 1.62 L | -/- | |
| ₹ 5.5 LPA | ₹ 2 L | -/- |
The values are of the latest years available with Shiksha. For more details, check detailed comparison
View comparisons
Central Institute of Tool Design M.E./M.TechExplore Other Courses
NK
Naveen Kommuri
M.E. in Tool Design - Batch of 2021
4.6
4Placements5Infrastructure5Faculty4Crowd & Campus Life5Value for Money
I am lucky to have been exposed to such a vibrant institute which runs in parallel with industries.
Placements: I am pursuing a master of engineering in tool design at Central Institute of Tool Design, Balanagar crossroads, Hyderabad. I'll be passed out in May 2021. There have been consistently 80% placements in tool design branch, and the average salary package offered will varies between 3.5 LPA to 5 LPA. Top recruiting firms for our college are Suzuki, Hyundai, John Deere, Thermax etc. Since the course is mainly about tool design and manufacturing, roles offered to our batch lie in design, research and development and manufacturing domains. Every student got internships from our batch. Every student gets internship opportunities.
Infrastructure: Central Institute of Tool Design has the latest labs and workshops with the latest tools and machinery. Moreover, our college has best-in-class facilities as commercial industries regularly do their work here. So, industry standards are being followed with utmost care. The latest machinery, including CNC machines, are available for students usage from 7 am to 11 pm. In addition to this, students are effectively trained in various industry specified software's, which are necessary for acquiring great employment opportunities. It is a government institution, and mess and canteen facilities are managed accordingly. The food served is great and is subsidised for all the students and faculty members. On-campus medical facilities are available round the clock.
Faculty:
Faculty members here are greatly experienced. Many of them have worked in reputed industries and are working here as professor emeritus and guiding faculty members. Faculty members are the core of the course. As tool design is an industry-specific course, faculty members have a vast experience in real-time industries for decades. The tool design course curriculum instils the basic and advanced knowledge about all the current industry requirements and also impart the knowledge of traditions processes and procedures.
Other: I have chosen this course as I have a great passion for machines and manufacturing. This course allows students to learn things in real-time with hands-on experience and training. This course is very dynamic as it has to be updated with all the regular advancements in the manufacturing industries, which is practically never-ending. Our college has a tie-up with Osmania University, so we are basically a part of it. Students have an active involvement in all curricular activities at Osmania. Since the course is offered by the government institute, scholarships and stipend are available under various schemes.
Reviewed on 7 Feb 2020Read More
(3) 3 people found this helpfulSN
Sai ram Nutulapati
M.E. in Tool Design - Batch of 2017
3.6
3Placements3Infrastructure4Faculty4Crowd & Campus Life4Value for Money
CITD-To Explore your Practical Knowledge.
Placements: In my batch 15 of 30 got placed and in my seniors batch 24 of 30 students got placed. 60-70% students got placed from every batch. The highest paid salary is 7.2L/a and average is 3L/a. Maruti Suzuki, Hyundai, Hero etc. Design engineers, assistant manager and various other roles are offered to students.
50-60% of students got internship facility. The highest paid was 15k and the lowest paid was 5k for internships. Average is 8k for internships. Yes, placement cell is available in the college.
Infrastructure: Infrastructure is quite good, good facility of library. Canteen maintenance is average. Good facilities for design practices. Projector classrooms. And good knowledge of tool room and experience. Students need to just gain experience in their revelavent field using these infrastructure
Quality of the food le less, when compared to others. No sports and curricular activities provided. Hostel rooms are good with regular maintenance. Till now no infrastructure issues faced.
Faculty: Facility with both theoretical and practical knowledge are available for various courses. The quality of teaching is very good and easily understood by any level of student. Student to facility ratio is 1:40. Which is not acceptable. But the quality of that one teacher is very high. ME tool design, ME cad cam, PGTD are most rated courses.
Other: There are no fests conducted in the college. Seminars from various guests lectures are conducted.
Reviewed on 16 Apr 2018Read More
(1) 1 person found this helpfulBC
Bhargav Ch
M.E. in CAD/CAM - Batch of 2018
4
4Placements4Infrastructure4Faculty4Crowd & Campus Life4Value for Money
Good faculty, good placements.
Placements: The placements for our batch and for our seniors batch are good. The eligibility percentage is based on the companies, it's better to get 75%. The salary may vary from company to company, could range from 3 LPA to 7.5 lakhs per annum. More than 50% of the students got the internship and the remaining are doing their own project.
Infrastructure: Coming to facilities, there is no Wi-Fi. Labs will be there with full-fledged software. Classrooms are there for teaching. Good library and medical facilities are available. The quality of food is good, and the cost is reasonable in the canteen. Hostel rooms are okay, not upto the mark.
Faculty: Teachers are very helpful, well-qualified and knowledge. There will be an entrance exam and if we qualify that, we can get a seat in this institute. We can see the industry process in our workshops. Teaching is good and in step by step process. If we have any doubt at any time, we can text or we can ask in class or we can ask in the lab. The faculty will help us.
Reviewed on 14 Feb 2018Read More
(4) 4 people found this helpfulA
Anonymous
M.E. in Tool Design - Batch of 2017
3
3Placements3Infrastructure3Faculty3Crowd & Campus Life3Value for Money
Other: Central Tool Room College is very simple college. It’s a central government college. Affiliated from MSME board. More practical work. Lots of working machines. Well knowledge staff. Best college for engineering. Tool and die making. Other short term courses. AutoCAD, CNC EDM, CNC, CNC Milling, Wire cut turning. Also have a large production department. Heat treatment department. 4 years diploma of tool and die making affiliated from central government. Located in Ludhiana. Smart classes are also available. Big halls, classrooms etc. average facilities.
Reviewed on 7 Mar 2015Read More
(1) 1 person found this helpfulSS
Suhas Suggula
M.E. in CAD/CAM - Batch of 2019
3.8
2Placements5Infrastructure4Faculty5Crowd & Campus Life3Value for Money
For diploma, it is a good college. It's a waste of time, so I suggest you not to join here.
Placements: Our college has placements, but small companies visit here. Our seniors did not place until now. CITD did not invite companies, and students did not attend the interviews. I asked the placement officer regarding placements, and then he said to wait as placements will be conducted.
Infrastructure: Our college has a good infrastructure, and there are 5 labs. In every lab, there are almost 50-60 systems. So, there is a total of 250 systems to practice, and in every lab, 4 air-conditioners are in power-on condition. The canteen is the worst, and the hostel is also the worst. Air-conditioned hostels are somewhat better compared to the normal hostel.
Faculty: Faculty members here are fine in masters of engineering students. For diploma students, faculty members were nice and good at teaching. Every point is explained, but for masters of engineering students, they just explain for namesake. Faculty members are strict, and exams will be conducted between the course and completion of the course.
Other: Our college doesn't organise events and fests, and scholarships are offered on time. Events conducted are related to technical, but not cultural things.
Reviewed on 5 May 2018Read More
View All 5 Reviews
Central Institute of Tool Design
Student Forum
Anything you would want to ask experts?Answered 4 years ago
The admission in IDC IITB in B.Des courses are based on the ranks obtained in UCEED exam. The eligibility criteria of UCEED is 10+2 or 3 years Engineering Diploma. The upper age limit for UCEED is 24 years. Further IDC IIT does not offers Tool Design UG courses. IDC is offering B.Des. courses in Ind
pradeep kumar
Scholar-Level 18
Answered 5 years ago
Yes you can do the Post Diploma in Tool Designing (PDTD). The eligibility criteria of asked course of CITD is given below. Eligibility : Diploma in Mechanical Engineering/Tool, Die and Mould Making or Equivalent. Age : Maximum 27 years
Fee : Rs 25000 Per semester (Appx. ). .
pradeep kumar
Scholar-Level 18
Answered 5 years ago
Central Institute of Tool Design, Hyderabad offers PGD in Tool Design and CAD/CAM course of 18 months (3 semesters) duration. The eligibility criteria and other details are given below.
Eligibility criteria : B.E/B.Tech (Mech. /Prod. or equivalent)
Admission criteria : Through Entrance Examination
C
pradeep kumar
Scholar-Level 18
Answered 6 years ago
Here is the complete admission procedure for this institute:
https://www.shiksha.com/college/central-institute-of-tool-design-bala-Nagar-Hyderabad-4245/admission
S
Sahil Rana
Guide-Level 15
Answered 6 years ago
Eligibility//Graduate from a recognized university. * Scope for Mechatronics Engineering in India Though, there is no specific data to track employment for mechatronics professionals, in the recent years there has been increasing demand for mechatronics professionals. About 5% growth in terms of emp
Konatham Abhishek
Scholar-Level 17
Content authored by:
Nishtha Shukla
Updated on Nov 14, 2025
Central Institute of Tool DesignTake a look at Campus
Computer Lab
Lab
Administration Block
Classroom
Seminar HallCentral Institute of Tool DesignContact Information
Address
Bala Nagar Chaurastha, Narsapur X Road, Hyderabad, Telangana
Hyderabad ( Telangana)
Phone
04027496178
(For general query)
04023772748
(For admission query)
Email
citdplacements@citdindia.org
(For general query)
citdmarketing2@gmail.com
(For admission query)
Go to College Website ->
Useful Links
Know more about Central Institute of Tool Design
- All About Central Institute of Tool Design
- Fees 2026
- Reviews on Placements, Faculty & Facilities
- Admission 2026 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Gallery 2026
- Infrastructure Details & Reviews
- Central Institute of Tool Design Faculty
- Compare Central Institute of Tool Design
- Central Institute of Tool Design Q&A
Which are the best tool design colleges in India? I am going to finish my Diploma in tool and die making from NTTF.