Indo-German Tool Room, Aurangabad After 10th Diploma Courses and Fees 2025
- Public/Government Institute
Last updated on 2 May '25IGTR Overview
Table of content
- Indo-German Tool Room, Aurangabad After 10th Diploma Eligibility and Highlights 2025
- IGTR After 10th Diploma Popular courses
- IGTR After 10th Diploma Curriculum
- Indo-German Tool Room, Aurangabad After 10th Diploma Seats 2025
- Students like you also explore these online After 10th Diploma courses
- + 2 more items
Indo-German Tool Room, Aurangabad After 10th Diploma Eligibility and Highlights 2025
The Indo-German Tool Room, Aurangabad After 10th Diploma is a After 10th programme. This course runs for a duration of 3 years. Under this programme, a variety of specialisations are offered. Some of these specialisations are Mechatronics Engineering. The course is offered in Full Time mode.
To get admission to After 10th Diploma offered by Indo-German Tool Room, Aurangabad, students are required to satisfy the eligibility and selection criteria. Check below to find the details regarding the Indo-German Tool Room, Aurangabad After 10th Diploma eligibility criteria and selection process:
- Selection Criteria: CBSE 10th and Maharashtra SSC
Indo-German Tool Room, Aurangabad After 10th Diploma Fees 2025
Once the seat allocation process for Indo-German Tool Room, Aurangabad courses is done, students must pay the prescribed fees to secure their admission. Generally, students are required to pay the first installment of the tuition fees. However, the frequency of fee payment depends on the regulations set by the institution.
Interested candidates can check the table below to learn more information related to Indo-German Tool Room, Aurangabad After 10th Diploma admissions:
Eligibility CriteriaAccepted ExamCBSE 10th ICSE Maharashtra SSC +2 more
Commonly asked questions On Highlights
IGTR After 10th DiplomaPopular courses
Filter
Streams
Mode of Study
Specialization
Course Level
4 More
Showing 2 Courses
Recommended Colleges
Explore popular similar colleges
Students who showed interest in Indo-German Tool Room, Aurangabad - After 10th Diploma also showed interest in
Want better recommendations?
There is a 90% more chance of getting best college recommendations by sharing preferences.Confused about which college or exam to opt for?
- Chat with our counselor
- Get your personalised list of colleges & exams matching your preferences
View allCollections
Is this recommendation relevant?
IGTR After 10th DiplomaCurriculum
Commonly asked questions On Curriculum
IGTR After 10th DiplomaIndo-German Tool Room, Aurangabad After 10th Diploma Seats 2025
Indo-German Tool Room, Aurangabad offers 240 seats for the programme. Aspirants can check below the Indo-German Tool Room, Aurangabad After 10th Diploma seat count:
240
Total Seats Available| Courses | Seats |
|---|---|
| Diploma in Mechatronics Engineering | 120 |
| Diploma in Tool and Die Making | 120 |
Students like you also explore these online After 10th Diploma courses
₹17.3 K
6 months
₹1.3 L
1 year
₹8.05 K
1 year
₹1.25 L
3 years
₹35 K
6 months
₹4 K
1 year
₹40 K
6 months
₹30 K
6 months
View all courses
IGTRComparison with similar colleges
Compare After 10th Diploma at IGTR with other similar colleges
| College | Median Salary | Total Tuition Fees | Ranking |
|---|---|---|---|
| -/- | -/- | -/- | |
| -/- | ₹ 18 K | -/- | |
| -/- | ₹ 18 K | -/- | |
| -/- | ₹ 18 K | -/- | |
| -/- | -/- | -/- | |
| -/- | ₹ 18 K | -/- |
CompareThe values are of the latest years available with Shiksha. For more details, check detailed comparison
View comparisons
S
Sampreeth 
Diploma in Mechatronics Engineering - Batch of 2026
5
5Placements5Infrastructure5Faculty5Crowd & Campus Life5Value for Money
Review of Indo-German Tool Room, Aurangabad.
Placements: Placements in the college are quite famous in the state of Maharashtra and students come from far away to get a course. A wide range of companies visit the college to hire students with a good salary package. The campus is good.
Infrastructure: Classrooms are quite decent. The ATC building in the college is quite advanced and the hostel is the good but con point is that the hostel food is below average. It only offers veg. The rest of the facilities provided in the college are the best.
Faculty: Faculty members here are polite and also strict. Exams held here are so strict and also checked strictly. Starting 4 semesters ar quite easy and the rest of them are a bit hard but once understood it is easy. Exams are also quite easy depending upon the preparation.
Reviewed on 28 Feb 2025Read More
A
Anonymous
Diploma in Tool and Die Making - Batch of 2021
4.2
3Placements4Infrastructure5Faculty5Crowd & Campus Life4Value for Money
Highly recommended CAD/CAM institute.
Placements: No placement is provided by the institute; it only improves our skills and based on that, we need to find jobs by ourselves. But the institute has many contacts with industries and they update students about vacancies and walk-in drives. In our batch, one student was placed in MG motors with a package of 5 LPA as a new product design engineer. No internships are given by the institute. Most design engineer roles are offered.
Infrastructure: Wi-Fi was given only for staff usage. In classrooms, we have separate PC setups for each student; all PCs are in working condition. Yes, we have a small library, and many design and basic engineering books are available there. The hostel mess was not good; it had a very low quality of food. But rooms are fine. No, we do not have a college canteen or a sports field.
Faculty: Teachers are really helpful; in practical sessions, they taught about commands and usage of software. In lecture, they teaches about machining operation, GD&T, sheet mental, etc. In curriculum, we have part design, assembly, IPD, surfacing and sheet mental. We have many software options like catia, creo, UG Nx, and Solidworks. Exams are practical 50% and theory 50%.
Other: It is a really great institute, and the fees are very affordable. No one will teach about CAD software in this way.
Reviewed on 28 Apr 2024Read More
V
Vrajesh Sikchi
Diploma in Mechatronics Engineering - Batch of 2026
4
5Placements3Infrastructure4Faculty4Crowd & Campus Life4Value for Money
Not happy with the teaching in 2024 but the placements and infrastructure of the college are superb.
Placements: Our college is a very efficient college when it comes to placement as companies like Rather, Bajaj, Maruti Suzuki, and MNCs like German and Japanese companies come to our college for placement. At a minimum, the placement rate of our college is 80% and the payment is decent. If considered on the basis of the diploma the highest payment goes up to Rs. 50,000 and the lowest is Rs. 18,000.
Infrastructure: The hostel is pretty average as the basic facilities required for daily activities are futile. Students suffer stomach aches due to the bad quality of the food provided by the canteen. Apart from these things the discipline is well maintained by the students and the dignity of the hostel is respected by the students as well.
Faculty: Exams are strict and students need to write papers in discipline. Papers are checked strictly and the students are given marks up to what they have written. The difficulty of the paper is average because the papers are to check a student's efficiency and not to fail them but to push them beyond their limit so that they are well prepared in the future for whatever comes.
Other: I personally chose this course as IGTR is a college that lives up to its name when it comes to practical knowledge. The students are enthusiastic and are always looking for new opportunities to learn.
Reviewed on 20 Mar 2025Read More
S
Sanket Kurkute
Diploma in Tool and Die Making - Batch of 2018
4
3Placements4Infrastructure5Faculty3Crowd & Campus Life5Value for Money
Best automobile designing software training center.
Placements: No placement assistance provided; it only improves our skills. After completing the course, many students are placed through off-campus at top MNC companies like Tata Technology, Tech Mahindra, and Skoda. I know my friend who was placed at 6 LPA in Skoda as a design engineer. No internship is provided by the institute.
Infrastructure: Wi-Fi is available, but its password is not shared with us. The institute is located in a good area, easily accessible from any point of the city. Hostel is very affordable, like negligible fees are charged. Mess food is not good. No sports faculty is provided, and no medical facility is provided by the institute.
Faculty: Teachers are very supportive; they give us tasks. They start from scratch, starting from sketching, part design to sheet metal, and assembly design of automobiles. We have practical exams, and we have CAD tests that need to be cleared for getting certification in Catia or UGNx software. Exams are not difficult; we have an understanding of basic engineering.
Other: IGTR offered free trending automobile design software training.
Reviewed on 4 Feb 2024Read More
A
Anonymous
Diploma in Tool and Die Making - Batch of 2022
2.8
4Placements2Infrastructure3Faculty2Crowd & Campus Life3Value for Money
Review of Indo-German Tool Room, Aurangabad.
Placements: Almost 80% of students got placed in our course. The top roles offered are diploma trainee engineer and tool room engineer.
Infrastructure: Our campus location is perfect. There are very limited machines in our college. The library is average. work. Hostel facilities are not good. Laboratory is better. Sports are not conducted. Canteen facility is average. Medical facilities are also not good.
Faculty: Teachers are knowledgeable in our college. Semester exams are not difficult, and it is an autonomous college.
Other: Workshops are also conducted for students. Events like gatherings, festivals, etc., are not held.
Reviewed on 25 Nov 2022Read More
chetan ravindra Shipne
Diploma in Tool and Die Making - Batch of 2024
4
3Placements4Infrastructure4Faculty5Crowd & Campus Life4Value for Money
It's helpful for our life and future.
Placements: In our college, 100% of students get placed in good MNC companies. With the highest package of 5.5 lac per annum, the top recruiting companies like Maruti Suzuki, Godrej, and Endurance. 19 students are selected for supervisor in Maruti Suzuki, 20 students selected for designer in Godrej.
Infrastructure: In our college, there are many facilities like a playground, a big canteen, and good hostels. We also have medical facilities. There is a practical workshop also available in our college. After all the theory periods, we have to practice in the workshop for getting more knowledge.
Faculty: In our college, the design engineers are our teachers. They are very helpful with practicals. It makes students industry-ready. To get admission in our college, we give an exam. In our college, there are separate teachers for individual subjects, and we learn very impressively.
Other:
Reviewed on 9 Oct 2024Read More
View All 12 Reviews
IGTR
Student Forum
Anything you would want to ask experts?Answered a year ago
Indo-German Tool Room, Aurangabad is a well-known institution for After 1th Diploma courses. These programs are delivered by highly experienced faculty. As per Shiksha verified reviews, Indo-German Tool Room, Aurangabad has a rating of 3.4 on the basis of reviews by students. Not just this, it has a
S
Subhrajeet Harichandan
Contributor-Level 9
Answered a year ago
Candidates must have passed 10th grade with 60% marks in aggregate (50% for reserved category candidates).
Age: Candidates must be 15–19 years.
Admission: Admission is first-come, first-served basis.
M
Mounika Valloju
Contributor-Level 6
Answered a year ago
Indo-German Tool Room, Aurangabad has below criteria for taking admissions to it's various courses:
| Courses | Eligibility |
|---|---|
| After 10th Diploma | Candidate must have passed 10th examination from a recognised board. |
A
Atul Mishra
Beginner-Level 1
Answered a year ago
Indo-German Tool Room, Aurangabad has been rated 2.6 on Infrastructure parameter.
Indo-German Tool Room, Aurangabad has also been rated 3.5 for Campuslife.
A
Atul Mishra
Beginner-Level 1
Answered a year ago
Indo-German Tool Room, Aurangabad has been rated 3.5 for faculty as per reviews by students. This shows that Institute has qualified and experienced faculty members.
A
Atul Mishra
Beginner-Level 1
Content authored by:
Jiya Tyagi
Updated on May 2, 2025
IGTR News & Updates
Latest
Popular
IGTRContact Information
Address
P-31, Midc, Chikalthana Industrial Area,
Aurangabad ( Maharashtra)
Go to College Website ->
Useful Links
Know more about IGTR
Explore Courses at similar colleges
- M.V.P Rural Polytechnic College
- Suburban College of Paramedical Education
- Government Polytechnic College, Amravati
- J. T. Mahajan Polytechnic College
- V.J.Shinde Polytenic College
- Acharya Shrimannarayan Polytechnic College
- Pulgaon Polytechnic College
- Government Polytechnic College, Washim
- Dr. Panjabrao Deshmukh Polytechnic
- Manav School of Polytechnic
What facilities are available in Indo-German Tool Room, Aurangabad?