PVPIT Pune: Courses, Fees, Admission 2025, Placements, Cutoff

Padmabhooshan Vasantdada Patil Institute of Technology Pune offers 5 PG courses. The duration of PG programme is 2 year and is a full-time course. Aspirants must check the eligibility before applying for any course.

M.Tech Fees:

• Mechanical Engineering- INR 1.86L
• VLSI Design- INR 1.86L
• Computer Science Engineering- INR 1.86L
• Construction Engineering- INR 2.2L
• Heat Power Engineering- INR 1.86L

You can check Shiksha page for detail fee structure.

JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology has been rated 4.2 on Infrastructure parameter. JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology has also been rated 3.8 for Campuslife.

JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology has below criteria for taking admissions to it's various courses:

Courses	Eligibility
B.E. / B.Tech	Candidate must have completed Diploma Course in Engineering and Technology in relevant stream with minimum 45% marks (40% marks in case of candidates of Backward class categories and Persons with Disability belonging to Maharashtra State only) from an All India Council for Technical Education or Central or State Government approved Institution or its equivalent. OR Candidate must have completed B.Sc. from UGC/ Association of Indian Universities recognised University with at least 45% marks (40% in case of candidates of Backward class categories and Persons with Disability belonging to Maharashtra State only) and passed 10+2 with Mathematics as a subject.
M.E./M.Tech	Sponsored candidate must have minimum of two years of full time work experience in a registered firm/ company/ industry/ educational and/ or research institute/ any Government Department or Government Autonomous Organization in the relevant field in which admission is being sought.

The candidates can find the PVPIT Pune cutoff by visiting the official website of the Padmabhooshan Vasantdada Patil Institute of Technology. After the release of the Round 8 Seat Allotment Results, PVPIT Pune JEE Mains cut off 2023 for BTech was completed. The Round 1 and Last Round closing ranks for B.Tech in Computer Science and Engineering (Data Science) remained at 138761 and 103708, respectively, for the General All India category students, according to the PVPIT Pune BTech cut off 2023.

JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology is a well-known engineering institute located in Pune, Maharashtra. It was established in academic year 2006-07. To join JSPM - TSSM's PVPIT an aspirant is required to score minimum 50 percent in his 10+2 board examination (Science Stream).Furthermore, cracking JEE-MAINS and MAH-CET is required to be qualify for getting admission in JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology.

Whether Padmabhooshan Vasantdada Patil Institute of Technology, Pune is more expensive than TSSM College of Engineering Pune depends on the various factors and one of them is fees.

The TSSM College of Engineering Pune offers courses under multiple specilizations such as: After 10th Diploma (4 courses), B.Tech (7 courses), and M.Tech (5 courses). The fee of courses are as follows:

• After 10th Diploma- INR 18K
• B.Tech- INR 2.34L to INR 3.11L
• M.Tech- INR 1.92L

The Padmabhooshan Vasantdada Patil Institute of Technology, Pune offers UG (6 courses), and PG (5 courses). 

• B.Tech- INR 2.7L to INR 3.5L
• M.Tech- INR 1.9L to INR 2.2L

Though PVPIT Pune is a bit expensive than TSSM College of Engineering Pune, on the other hand TSSM offers more courses than PVPIT.

The flagship courses offered at JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology are B.Tech, M.E./M.Tech. The Institute has experienced faculty offering the best education to students. On the basis of Shiksha verified reviews, JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology has a rating of 4 by students. The college's campus life, placements, faculty and infrastructure has been rated as 3.8, 4.2 and 4.2 as per reviews by students. Thus, JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology is a known college/institute.

Padmabhooshan Vasantdada Patil Institute of Technology, part of JSPM - TSSM offers Five undergraduate and five graduate courses. These courses are available full-time. A few of the specializations offered by JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology are B.Tech in Mechanical Engineering, Civil Engineering, Electronics Engineering, and Computer Science Engineering, and M.E./M.Tech in Mechanical Engineering, VLSI Design, Computer Science Engineering, and Construction Engineering.

• Entrance exam accepted for B.Tech are JEE mains, MHT CET.
• Entrance exam accepted for M.Tech are GATE, MHT CET M.Tech. 

You fill find the registration form on college website of JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology. Signup to it and get call from college after that you will get a full registration from college side. You can also give GATE or JEE Exam for getting addmission in JSPM which also give you scholarship on bases of merit. College placements are very good, It can go more than 18LPA and on average 4.2LPA which  is good in this competetive world. Also college has very few seats for best students in which more than 81% students got placed In-campus hiring.

The rank required to get admisssion at JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology is different for different courses/program. Following are the cut off ranks for different courses:

• BE Civil Engineering - 482101 rank
• B.E. Electronics and Telecommunication Engineering - 182798 rank
• B.E. Computer Engineering - 123778
• B.E. Mechanical Engineering - 566502 rank
• B.Tech. Computer Science and Engineering (Data Science) - 103708 rank. 

PVPIT is governed by The Shetkari Shikshan Mandal, a charitable Trust registered under Bombay Public Trust Act 1950 and Societies Registration Act 1860.Academic environment and the overall campus life experience is really appreciable. Faculty teachers are helpful, qualified, and knowledgeable, which is very promising. The industry-focused curriculum is also a significant advantage. Furthermore, it have zero tolerance for ragging as well as JSPM-TSSM has taken all necessary steps to ensure the comfort of newcomers. The university aspires to build, cultivate, and maintain an environment of outstanding academic achievement, research, and entrepreneurship in order to prepare all aspiring students to address global concerns while keeping high ethical and moral standards through qualitative techniques.

Some factors which affect JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology cutoff 2023 are:

1. The total number of seats at JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology are low.
2. As it is a engineering college, program/courses like BE and B.Tech are in higher demand which results in higher cut off.

JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology is a well known Institute located in Pune, Maharashtra. It was established in 2006. The Padmabhooshan Vasantdada Patil Institute of Technology (PVPIT) at JSPM-TSSM offers ten programmes with tuition ranging from Rs. 186,000 for the M.E. in Computer Engineering to Rs. 353,556 for the B.E. in Computer Engineering. Furthermore, B.Tech total tuition fees is 2.7L-3.5L while total tuition fees for pursuing M.Tech is 1.9L - 2.2L.

Compulsorily JEE Main is required to take admission in JSPM. Now after heavy competition, JEE exam is mandatory to take admission in any top colleges. Scoring good in JEE can help you to get admission in best colleges who offer top notch learning both digital and physical, With advance technology students can learn easily and quickly. The learning environment changes dynamically rapid and top colleges knows how to tackle and how pressure they give to students and enhance learning easily. JEE Main exam is one of the top and hard exams to clear, it needs dedication and passion to learn and grow new skills and knowledge.

Whether Padmabhooshan Vasantdada Patil Institute of Technology Pune is better than TSSM College of Engineering Pune totally depends on candidate' preferences and ofcourse the placement. 

Both Padmabhooshan Vasantdada Patil Institute of Technology and TSSM College of Engineering Pune offers 5 courses in M.Tech. The fee for M.Tech in PVPIT ranges from INR 1.9L to INR 2.2L, whereas TSSM College of Engineering Pune M.Tech fee for 2 years is 1.9L.

PVPIT allots 108 seats in M.Tech and TSSM College of Engineering allotes 84 seats in M.Tech. The placement in both the institute is good, they have a placement cell that guides students in their interview and also prepares them with various skills. The 2023 placement in TSSM got offers between INR 4 LPA and INR 12 LPA and PVPIT got offered INR 18 LPA.

For more information about both the institute, you can visit the Shiksha page of respective institute and compare.

PVPIT Pune admission to BCA is entirely entrance-based. Candidates are required to qualify for a state-level MAH MCA CET, which is conducted by Maharashtra State Common Entrance Test Cell. Further, candidates who passed Class 12 with minimum 50% aggregate from a recognised board are eligible to sit for the exam and apply for the course. At last, the final seat allotment to selected students is done through CAP counselling process over 120 seats.

Padmabhooshan Vasantdada Patil Institute of Technology (PVPIT) Pune offers degree courses in UG and PG with multiple specilizations. Students who wants to continue their studies and do Masters degree from PVPIT must fulfill the eligibility criteria and then apply. PVPIT allots a total of 108 seats in M.Tech.

Firstly, Aspirants need to go through the criteria set by the institute, then score a qualifying marks in the entrance exam i.e. GATE, MHTCET M.Tech. After that shortlisted candidates will be called for counselling or interview and then selected candidates will be alloted seat as per the ranking. As many students can apply for M.Tech at PVPIT Pune but those will get selected who qualify the selection process.

Padmabhooshan Vasantdada Patil Institute of Technology Pune offers UG and PG courses under various specilizations in full-time mode. The candidate must have successfully completed a Diploma programme in engineering and technology in a relevant field with at least 45% marks (40% for candidates from Maharashtra State-only Backward Class categories and Persons with Disabilities). The programme must have been approved by the Central or State Government, the All India Council for Technical Education, or an equivalent body. or The candidate must have passed 10+2 with mathematics as a subject and earned a B.Sc. from a UGC/Association of Indian Universities recognised university with at least 45% marks (40% in the case of candidates from Backward class groups and Persons with Disability belonging to Maharashtra State alone). Yes, you can get into PVPIT Pune with 70% in JEE Mains by counselling.

JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology offers UG and PG courses under multiple specilizations. The UG course dustion last for 4 year whereas the PG course duration is for 2 years.

Yes, the Padmabhooshan Vasantdada Patil Institute of Technology provides lateral entry directly into the second year of Mechanical engineering for those students who have completed a Diploma degree in engineering.

To apply for B.Tech, you need to visit the official website of the institute register yourself and fill the application form keeping in minid the eligibility criteria for the course.