What is the latest cutoff information for admission to B.Tech at JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology?

Due to the ongoing entrance tests, JSPM - TSSM's PVPIT has not yet issued the B.Tech cutoffs for 2024 admissions. Cutoffs usually occur after the test is over. JEE Main or MHT CET results are accepted by PVPIT. There are January and April sessions for JEE Main 2024; the results for April are still awaiting. With tests taking place in late April, MHT CET registration closed on March 1, 2024. Anticipate deadlines following the April MHT CET and JEE Main. For announcements regarding deadlines, stay informed by visiting PVPIT's website.

What is the seat intake for B.Tech at PVPIT Pune?

The total seat intake for B.Tech at Padmabhooshan Vasantdada Patil Institute of Technology, Pune is 480. The table below shows the seats alloted as per the B.Tech courses. Courses Seats B.E. in Computer Engineering 180 B.E. in Mechanical Engineering 120 B.Tech. in Computer Science and Engineering (Data Science) 60 B.E. in Electronics and Telecommunication Engineering 60 B.E. in Civil Engineering 60

What is the seat intake for M.Tech at PVPIT Pune?

At JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology, a full-time M.E. course is offered across five specialisations. The total seat intake for M.E. at PVPIT Pune is 108. Check below the specialisation-wise seat intake for M.E. courses: M.E. Specialisations Seat Intake Mech Engg. (Heat Power) 12 Mech Engg. (Design) 24 Civil Engg. (Construction Mgnt.) 24 Computer Engg. 24 E&TC Engg. (VLSI & Embedded System 24

Which is the top course of PVPIT Pune?

The Padmabhooshan Vasantdada Patil Institute of Technology offers degree courses including 6 UG and 5 PG courses. These programs are offerred in full time mode. B.Tech Specilizations: Mechanical Engineering Computer Engineering Civil Engineering Electronics and Telecommunication Engineering Mechanical Engineering (Lateral Entry) Computer Science and Engineering (Data Science) M.E./M.Tech Specializations: Mechanical Engineering VLSI Design Computer Science Engineering Construction Engineering Heat Power Engineering

What is the fee for various courses offered by JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology?

JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology is a well known Institute located in Pune, Maharashtra. It was established in 2006. The Padmabhooshan Vasantdada Patil Institute of Technology (PVPIT) at JSPM-TSSM offers ten programmes with tuition ranging from Rs. 186,000 for the M.E. in Computer Engineering to Rs. 353,556 for the B.E. in Computer Engineering. Furthermore, B.Tech total tuition fees is 2.7L-3.5L while total tuition fees for pursuing M.Tech is 1.9L - 2.2L.

What is the qualification required to join JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology?

JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology is a well-known engineering institute located in Pune, Maharashtra. It was established in academic year 2006-07. To join JSPM - TSSM's PVPIT an aspirant is required to score minimum 50 percent in his 10+2 board examination (Science Stream).Furthermore, cracking JEE-MAINS and MAH-CET is required to be qualify for getting admission in JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology.

Is PVPIT Pune is more expensive than TSSM College of Engineering Pune?

Whether Padmabhooshan Vasantdada Patil Institute of Technology, Pune is more expensive than TSSM College of Engineering Pune depends on the various factors and one of them is fees. The TSSM College of Engineering Pune offers courses under multiple specilizations such as: After 10th Diploma (4 courses), B.Tech (7 courses), and M.Tech (5 courses). The fee of courses are as follows: After 10th Diploma- INR 18K B.Tech- INR 2.34L to INR 3.11L M.Tech- INR 1.92L The Padmabhooshan Vasantdada Patil Institute of Technology, Pune offers UG (6 courses), and PG (5 courses). B.Tech- INR 2.7L to INR 3.5L M.Tech- INR 1.9L to INR 2.2L Though PVPIT Pune is a bit expensive than TSSM College of Engineering Pune, on the other hand TSSM offers more courses than PVPIT.

How are B.Tech placements at PVPIT Pune?

When it comes to recruiting its B.Tech students, PVPIT (Padmabhooshan Vasantdada Patil Institute of Technology) has a respectable record. The college's active placement cell seeks to develop and facilitate possibilities for students to be placed. Pre-placement discussions, industry meetings, workshops, and training sessions are just a few of the events that PVPIT's placement cell arranges to help students become more employable and ready for the hiring process. Additionally, the cell helps students with interview preparation, résumé building, and general personality development. Many IT companies visited PVPIT for recruiting students and the highest packaged offered was INR 18 LPA as per the official report.

Where can a candidate find PVPIT Pune cut off?

The candidates can find the PVPIT Pune cutoff by visiting the official website of the Padmabhooshan Vasantdada Patil Institute of Technology. After the release of the Round 8 Seat Allotment Results, PVPIT Pune JEE Mains cut off 2023 for BTech was completed. The Round 1 and Last Round closing ranks for B.Tech in Computer Science and Engineering (Data Science) remained at 138761 and 103708, respectively, for the General All India category students, according to the PVPIT Pune BTech cut off 2023. Course R1 (Closing Rank) Last Round (Closing Rank) B.E. in Civil Engineering 355888 482101 B.E. in Computer Engineering 111561 123778 B.E. in Electronics and Telecommunication Engineering 189784 182798 B.Tech. in Computer Science and Engineering (Data Science) 138761 103708

Can I get into PVPIT Pune with 70% in JEE Main?

Padmabhooshan Vasantdada Patil Institute of Technology Pune offers UG and PG courses under various specilizations in full-time mode. The candidate must have successfully completed a Diploma programme in engineering and technology in a relevant field with at least 45% marks (40% for candidates from Maharashtra State-only Backward Class categories and Persons with Disabilities). The programme must have been approved by the Central or State Government, the All India Council for Technical Education, or an equivalent body. or The candidate must have passed 10+2 with mathematics as a subject and earned a B.Sc. from a UGC/Association of Indian Universities recognised university with at least 45% marks (40% in the case of candidates from Backward class groups and Persons with Disability belonging to Maharashtra State alone). Yes, you can get into PVPIT Pune with 70% in JEE Mains by counselling.

What are the cutoff marks required for B.Tech at PVPIT Pune?

Those candidates who want to pursue B.Tech from Padmabhooshan Vasantdada Patil Institute of Technology Pune must meet the required eligibility criteria and qualify the JEE Mains entrance exam as a part of selection process. The cutoff marks for B.Tech at PVPIT Pune is mentioned in the table below for 2021, 2022, and 2023 of all the B.Tech specilizations. JEE Main Last Round Closing Rank (General-All India) Course 2021 2022 2023 B.E. in Civil Engineering 739367 – / – 482101 B.E. in Electronics and Telecommunication Engineering 379415 186118 182798 B.E. in Computer Engineering 186260 – / – 123778 B.E. in Mechanical Engineering 801310 – / – 566502 B.Tech. in Computer Science and Engineering (Data Science) – / – – / – 103708

How are B.Tech placements at PVPIT Pune?

When it comes to recruiting its B.Tech students, PVPIT (Padmabhooshan Vasantdada Patil Institute of Technology) has a respectable record. The college's active placement cell seeks to develop and facilitate possibilities for students to be placed. Pre-placement discussions, industry meetings, workshops, and training sessions are just a few of the events that PVPIT's placement cell arranges to help students become more employable and ready for the hiring process. Additionally, the cell helps students with interview preparation, résumé building, and general personality development. Many IT companies visited PVPIT for recruiting students and the highest packaged offered was INR 18 LPA as per the official report.

Who are the top recruiters of PVPIT Pune?

Padmabhooshan Vasantdada Patil Institute of Technology Pune organise a placement drive for their students. It provides multiple training to the students and prepare them for the interview. Trainings such as: Soft Skills Training Aptitude Training Computer Programming Training Project Management Training Personality Development Core Domain Training The institute invites recruiting companies to their campus for recruitment. The top recruiters of PVPIT Pune are Talentio Technologies, Jaro Education, Wiley, Byju's, Intellipaat, Wisteria Real Vision, Silicus Technologies, etc.

Does PVPIT Pune have good placements?

Yes, Padmabhooshan Vasantdada Patil Institute of Technology Pune offeres good placements. According to the official website, the average package offered during placements 2023 was INR 4.2 LPA, while the highest package was INR 18 LPA. Furthermore, 81 out of 100 students were placed during JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology placements in 2023, and 1,500 recruiters visited the institute. Top recruiters such as Alentio Technologies, Jaro Education, Wiley, Byju's, and many more came for recruitment. Along with a good placement, the institute also provides training to students to get prepared for the interview. Soft Skills Training, Aptitude Training, Computer Programming Training, and others are opportunities are provided to the students.

What is the latest cutoff information for admission to B.Tech at JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology?

Due to the ongoing entrance tests, JSPM - TSSM's PVPIT has not yet issued the B.Tech cutoffs for 2024 admissions. Cutoffs usually occur after the test is over. JEE Main or MHT CET results are accepted by PVPIT. There are January and April sessions for JEE Main 2024; the results for April are still awaiting. With tests taking place in late April, MHT CET registration closed on March 1, 2024. Anticipate deadlines following the April MHT CET and JEE Main. For announcements regarding deadlines, stay informed by visiting PVPIT's website.

What is the eligibility criteria for admission to M.Tech at JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology?

To be eligible for entrance tests such as GATE or MHT CET, you would typically need to have an undergraduate degree with an aggregate of 50% this is more than enough to be eligible for M.Tech courses at any university. Nothing specific regarding eligibility requirements can be found on the college's website. However, in order to avoid any blunders, parents and students who are thinking about applying to this institute would be in a better position if they were to get information about this from the admission office.

What is the selection process for B.Tech and minimum JEE Main percentile required at PVPIT Pune?

The Padmabhooshan Vasantdada Patil Institute of Technology Pune offers UG and PG courses and to get admission into them aspirants have to meet the criteria set by the institute to go ahead with the selection process. Candidates need to score a minimum of 50% in 10+2 board examinations in Science Stream. Or should have a Diploma degree in Engineering. Secure qualifying marks in JEE-MAINS and MAH-CET. Fill in the application form The minimum JEE Mains percentile is not yet disclosed by the institute, candidates who have scored 50% are eligible to appear for the entrance exam. The institute will reveal the marks required at the time of admission.

What entrance exam scores are accepted by PVPIT Pune for admission?

Padmabhooshan Vasantdada Patil Institute of Technology, part of JSPM - TSSM offers Five undergraduate and five graduate courses. These courses are available full-time. A few of the specializations offered by JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology are B.Tech in Mechanical Engineering, Civil Engineering, Electronics Engineering, and Computer Science Engineering, and M.E./M.Tech in Mechanical Engineering, VLSI Design, Computer Science Engineering, and Construction Engineering. Entrance exam accepted for B.Tech are JEE mains, MHT CET. Entrance exam accepted for M.Tech are GATE, MHT CET M.Tech.

Is PVPIT Pune good for B.Tech?

Padmabhooshan Vasantdada Patil Institute of Technology Pune offers B.Tech and M.Tech programme under various specilizations. Under B.Tech there are 6 courses: Mechanical Engineering Computer Engineering Civil Engineering Electronics and Telecommunication Engineering Mechanical Engineering (Lateral Entry) Computer Science and Engineering (Data Science) The fees for B.Tech range between INR 2.65 L to INR 3.54 L. The highest package college recorded for B.Tech at JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology in 2023 is INR 18 Lakhs per annum. If you are thinking of opting B.Tech from PVPIT Pune then go ahead.

How many BTech specialisations are offered at PVPIT Pune?

PVPIT offers four-year B.E. programmes across five specialisations. The course is spread across eight semesters at UG level. All the five B.E. specialisations are listed below: Mehcanical Engineering Civil Engineering E & TC Computer Engineering Computer Engg. & Data Science

JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology

2 Videos,

6 Photos

PVPIT Pune: Courses, Fees, Admission 2025, Placements, Cutoff

Q: How to apply for admission at JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology?

You fill find the registration form on college website of JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology. Signup to it and get call from college after that you will get a full registration from college side. You can also give GATE or JEE Exam for getting addmission in JSPM which also give you scholarship on bases of merit. College placements are very good, It can go more than 18LPA and on average 4.2LPA which is good in this competetive world. Also college has very few seats for best students in which more than 81% students got placed In-campus hiring.

Q: Is JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology good for BTech?

JSPM is one of the best Technological Colleges of Pune, The highest package goes 18LPA in 2023 according to reports. The average package of college is 4.2LPA or above which shows the college has provide best B.Tech opportunities to the students. Total seats which has been given by college is 100 and placement goes high upto 81 which shows the 81% better placement opportunities given by college to their students. More than 1500 reqruiters are interested to take incampus placements. Some of the popular reqruiters are Talentio Technologies, Jaro Education, Wiley, and many more which is a +1 point for every student who wants to join JSPM.

Q: Is JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology Online degree valid?

TSSM is situated in Pune one of the best place for Technological college, You must be clear that the Online degree is Valid as this college is approved by AICTE (All India Council of Technical Education). A degree obtained through the online/distance mode is equivalent to a degree obtained through the regular mode. UGC approved the online degree is valid in India for any course which is approved and always stay alert from fraud! But this college is genuinely approved by AICTE and has approval to promote Online Valid Degree for each and every student who satisfy terms and conditions to eligible for Online degree.

Bavdhan, Pune

3.9 /5

(75 Reviews)

18 Student Q&A

A NAAC accredited
Private Institute
Estd. 2006

PVPIT Pune
What's new?

For All Courses

Change

JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology admissions are open to all the courses for the academic year 2024-25. Students can go to the official website to apply.

A few more updates are given below:

The MHT CET 2026 session 1 exam for admission to BE/BTech and Integrated BTech courses will tentatively be held from Apr 11 to Apr 19, 2026.
The GATE 2026 exam for admission to ME/MTech courses will be conducted on Feb 7, Feb 8, Feb 14, and Feb 15, 2026.

Video stories

Eligibility & Cut Offs

PVPIT Pune Overview

Table of contents

JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology Highlights
JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology courses
JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology Admission 2025
PVPIT Pune Student Reviews
PVPIT Pune Cut Offs 2025
+ 11 more items

JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology Highlights

Established in 2006, JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology is a premier Institute located in Maharashtra. JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology has diverse programs which can be chosen by the students. It offers Degree courses including 5 UG and 5 PG courses. These programs are offerred in Full Time mode. JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology is a well-known institution for B.E. / B.Tech, M.E./M.Tech courses. These programs are delivered by highly experienced faculty. Institute enjoys a good reputation for courses like B.E. / B.Tech, M.E./M.Tech in the streams of Engineering Students can opt courses from these. Over the period, JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology has gained expertize through its trained and experienced faculty in the fields of Mechanical Engineering, Civil Engineering, Electronics Engineering, Computer Science Engineering, VLSI Design, Construction Engineering. JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology offered courses that are recognized by approving bodies like AICTE. JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology offered courses for 588 seats.

Particulars	Statistics
Campus Location	Pune, Maharashtra
Courses Offered	UG and PG
No. of Seats	588
Median Salary	-

Check out more on JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology Highlights:

Commonly asked questions
On Highlights

Q: Is GATE required for M.E./M.Tech Admission at JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology?

Yes, GATE is required to take admission in ME and M.Tech at JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology. GATE (Graduate Aptitude Test in Engineering) is one of the biggest exam and students are required to qualify it as an eligibility criteria for taking admission in the top engineering colleges.

Q: Are admissions at PVPIT Pune entrance-based or merit-based?

The Padmabhooshan Vasantdada Patil Institute of Technology is a prestigious institution in Maharashtra. Students at the Padmabhooshan Vasantdada Patil Institute of Technology have a variety of programs to choose from. It provides six undergraduate and five graduate degree programs. These courses are available full-time.

More than 1500 companies come to recruit students in-campus placement with a maximum package of 18 Lacs Per Annum and of Average 4.2 Lacs Per Annum. To get admission in BE/Btech, you must clear JEE-MAINS and MAH-CET with 10+2 aggregate (45%). The admission is based on the marks secured in the entrance exam.

Q: What is the fee for M.Tech at PVPIT Pune?

Padmabhooshan Vasantdada Patil Institute of Technology Pune offers 5 PG courses. The duration of PG programme is 2 year and is a full-time course. Aspirants must check the eligibility before applying for any course.

M.Tech Fees:

Mechanical Engineering- INR 1.86L
VLSI Design- INR 1.86L
Computer Science Engineering- INR 1.86L
Construction Engineering- INR 2.2L
Heat Power Engineering- INR 1.86L

You can check Shiksha page for detail fee structure.

JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology courses

Please find below the latest information around JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology courses 2025, along with other courses:

B.E. / B.Tech

6 Courses

3.8(74)3 - 4 years

Exams Accepted

Total Tuition Fees

₹2.65 L - 3.59 L

Get Fee Details

Placement Rating

3.6

BCA

1 Course

3.0(1)3 years

Exams Accepted

– / –

Total Tuition Fees

– / –

Placement Rating

3.0

View All 3 Courses

JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology Admission 2025

Please find below the latest information around JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology Admission 2025:

B.E. / B.Tech Admissions 2026

6 Courses3 years-4 years

Eligibility

10+2 with 45% aggregate
Accepting Exams: MHT CET, JEE Main

Important dates

Dates	Events
31 Oct '25 - 27 Nov '25	JEE Main 2026 Registration Session 1Ongoing
Jan '26	JEE Main Admit Card 2025 Session 1Tentative
21 Jan '26 - 30 Jan '26	JEE Main 2026 Exam Date Session 1

M.E./M.Tech Admissions 2026

6 Courses2 years

Eligibility

Undergraduate Degree with 50% aggregate
Accepting Exams: GATE, MHTCET MTech

Important dates

Dates	Events
2 Jan '26	GATE 2026 Admit Card
7 Feb '26	GATE 2026 Exam- Forenoon (AG, ES, GG, IN, MA, MN, TF, XE, and XL)
7 Feb '26	GATE 2026 Exam- Afternoon (AE, BT, CH, CY, GE, PH, XH)