Diploma in Tool and Die Making
4.0 /5- Public/Government Institute
Diploma in Tool and Die Making at MSME Technology Centre, Bhiwadi Overview
Diploma in Tool and Die Making
at MSME Technology Centre, Bhiwadi
At MSME Technology Centre, Bhiwadi, After 10th Diploma is offered across various specialisations, including Diploma in Tool and Die Making. This course is a After 10th level course. Moreover, it is offered for a duration of 3 years. The total seat intake is 60. Students interested in knowing about the other specialisations can visit the MSME Technology Centre, Bhiwadi After 10th Diploma page. Also, check out the below table to know other key highlights about Diploma in Tool and Die Making offered by MSME Technology Centre, Bhiwadi:
Total Tuition Fees | ₹66,000 Get Fees details |
Duration | 3 years |
Course Level | After 10th Diploma |
Mode of Course | Full Time |
Official Website | Go to Website  |
Seat breakup | 60 |
Type of University | Public/Government |
Diploma in Tool and Die Making
Table of content
- Overview
- Fees
- Student Reviews
- Entry Requirements
- Admission Process
Diploma in Tool and Die Making at MSME Technology Centre, Bhiwadi Fees
Diploma in Tool and Die Making
at MSME Technology Centre, Bhiwadi
MSME Technology Centre, Bhiwadi Diploma in Tool and Die Making fee is collective of various components, such as the tuition fees, one-time charge, hostel fees, registration fees, examination fees, and other basis. However, there may be additional fees that students might be required to pay that are particular to the institution. At MSME Technology Centre, Bhiwadi, the total tuition fee for Diploma in Tool and Die Making is INR 66,000. Here are further details regarding the MSME Technology Centre, Bhiwadi Diploma in Tool and Die Making fee breakup:
| Fee components | Amount (3 years) |
|---|---|
The above mentioned fees is as per DTE Rajasthan.
Tuition fee is calculated on the basis of 1st year/semester. Actual amount may vary. | ₹ 66,000 |
The above mentioned fee is for 3 seater room. It does not include
Caution money 2000
Mess charges 1000
General fund 500
Maintenance charges 800 | ₹ 1,800 |
The above mentioned fee includes
Caution money | ₹ 7,500 |
₹ 75,300 |
These are based on information available on various sources. Latest values may differ.
S
Sandeep kumar 
Diploma in Tool and Die Making - Batch of 2023
Offered by MSME Technology Centre, Bhiwadi
4.2
4Placements3Infrastructure5Faculty4Crowd & Campus Life5Value for Money
Good college for practical knowledge.
Placements: Placement opportunities at MSME Technology Centre, Bhiwadi are excellent. The highest package offered is almost 2.5 Lacs per annum, and the lowest package is 1.5 Lacs per annum. Companies like Tata Motors, Baxy, and Lenskart hire our graduates. About 90% to 95% of our students get internships. The top role offered is tool design and manufacturing.
Infrastructure: Our college has the facilities required for both practical and theoretical classes. For theory classes, we have air-conditioned classrooms equipped with projectors, PCs, and whiteboards. For practical classes, we have a computer lab, machine workshops, and a simulation lab. Hostels are available for outstation boys and girls.
Faculty: The course curriculum is relevant, and we get trained on all design software like AutoCAD, SolidWorks, and Mastercam that are required in the industry. For the manufacturing industry, all machines and operations are done in college. The teachers are knowledgeable and have industry experience.
Other: I chose this college for their facilities and education. The hostel food and facilities should be better.
Reviewed on 24 Oct 2024Read More
A
Anonymous
Diploma in Tool and Die Making - Batch of 2026
Offered by MSME Technology Centre, Bhiwadi
4.2
4Placements4Infrastructure5Faculty3Crowd & Campus Life5Value for Money
Good infrastructure and facilities available.
Placements: Almost 80 to 90% of students get placement in different companies. Tata Motors, JCB, Lenskart, Maruti Suzuki are the recruiting companies for placements. The highest package is 4 LPA and the lowest package offered by companies is 15 LPA.
Infrastructure: The college has three main blocks. One is the admin block, the second is the training block where classes are located, and the third is the production block where the production of different items is held by the production team. Infrastructure of the college is good. Hostel and canteen facilities are also available.
Faculty: The curriculum of the course is very relevant. For tool and die making students, tool design, die assembly, software like AutoCAD, SolidWorks, NX, Mastercam are important. Here you gain knowledge of all these points. One important thing is practical. You get here 70% practical and 30% theory which makes you ready for the industries. Semester exams are not difficult. Pass percentage is 70-80%.
Other: The best thing about our course is you do more practical than theory. Practical knowledge makes you ready for the industry.
Reviewed on 10 Feb 2024Read More
A
Anonymous
Diploma in Tool and Die Making - Batch of 2024
Offered by MSME Technology Centre, Bhiwadi
4.6
4Placements4Infrastructure5Faculty5Crowd & Campus Life5Value for Money
College has good infrastructure and facilities.
Placements: Top roles offered in our course are design of jigs and fixtures, design of moulds, design of press tools, cnc
programming. Almost 80-90% students gets internships from our course in 4th year. Top recruiting company are Tata motors, Maruti Suzuki, Lenskart etc. The highest package is of 350000 per annum and the lowest package is of 150000 per annum.
Infrastructure: The college has very good infrastructure and facilities. The college have Hostel and canteen facilities for outstation students. Hostel are available for both boys and girls separately. Classrooms are available with Wi-Fi, projector and air conditioning. Computer labs and cnc labs are also available.
Faculty: Experienced teachers are available in college. They are well qualified and knowledgeable. The semester exams are not difficult. Pass percentage is of almost 70-80%. The course curriculum is also relevant. Tool design and die assembly are main work in tool industry that we study in college.
Other: The college is located in RIICO Industrial area. Main bus stand is almost 10km away.
Reviewed on 10 Feb 2024Read More
A
Anonymous
Diploma in Tool and Die Making - Batch of 2025
Offered by MSME Technology Centre, Bhiwadi
4.2
4Placements4Infrastructure4Faculty4Crowd & Campus Life5Value for Money
Satisfied because of faculty and good placement in 2019-2020 batch.
Placements: Top recruiting company are Lenskart, continental engine, Tata motors, Baxy pvt ltd. , Pvt Ltd.
80-90% students get internships from our course in above mentioned companies. Top roles offered in our course are cnc programming, tools and die making and design of various tools.
Infrastructure: The college have four main blocks. One is admin block and other are Training block in which our classes are located. Other is production block in which there are various machines like 5-axis cnc machines, cnc wire cut machines, coordinated measuring machines etc.
Faculty: Semester exams are not so difficult. Almost 50-60% students get pass in semester exam easily. Other remaining students are fails in only 1-2 subjects. The teachers are very helpful and qualified. Our course curriculum is also relevant. We here learn all the things that are useful for work in a industry.
Other: In extracurricular activities, college visits different industry by which we can learn how big industry are works. How products can be made from raw materials.
Reviewed on 29 Jan 2024Read More
A
Anonymous
Diploma in Tool and Die Making - Batch of 2023
Offered by MSME Technology Centre, Bhiwadi
4
5Placements4Infrastructure4Faculty3Crowd & Campus Life4Value for Money
Best college for Diploma students as they get more practical knowledge.
Placements: Almost 70-80% of students get placements in many industries from our college. The highest package given by Tata Mobility is 3.6 LPA, and the lowest package is 1.5 LPA. Tata Motors, JCB, Baxy, Lenskart, Continental Engine are the top recruiting companies for our course.
Infrastructure: All facilities that are required for diploma students as well as degree students are available in our college. Like computer lab for design software and CNC simulation lab for CNC programming and machining practice. Classrooms with Wi-Fi and projector facilities are available. Hostel and canteen facilities are also available.
Faculty: Yes, the teachers are very helpful, well-qualified, and knowledgeable. Experienced faculty members are available for teaching. The semester exams are not so difficult. The pass percentage is almost 60-70% every semester. The course curriculum is also relevant. This course makes students ready for the industry.
Other: I want to choose this course because I want to gain practical knowledge, not only theoretical knowledge. This is the best college for both practical and theoretical knowledge.
Reviewed on 25 Jan 2024Read More
View All 11 Reviews
Diploma in Tool and Die Making at MSME Technology Centre, Bhiwadi Frequently Asked Questions
Diploma in Tool and Die Making
at MSME Technology Centre, Bhiwadi
Q: Is MSME Technology Centre, Bhiwadi worth considering?
ShikshaGPT says A:
The flagship courses offered at MSME Technology Centre, Bhiwadi are After 1th Diploma. The Institute has experienced faculty offering the best education to students. On the basis of Shiksha verified reviews, MSME Technology Centre, Bhiwadi has a rating of 4.8 by students. The college's campuslife, placements, faculty and Infrastructure has been rated as 4.5, 5, 5 and 4.5 as per reviews by students.
AskShikshaGPT on App
Q: How can I get into MSME Technology Centre, Bhiwadi for UG/PG courses? Am I eligible for admission?
ShikshaGPT says A:
MSME Technology Centre, Bhiwadi has below criteria for taking admissions to it's various courses:
| Courses | Eligibility |
|---|---|
| After 10th Diploma | Candidate must have passed class 10th examination or its equivalent with Science and Mathematics subjects and secured at least 35% marks from a recognised board. |
AskShikshaGPT on App
Q: What is the overall intake at MSME Technology Centre, Bhiwadi for all courses together?
ShikshaGPT says A:
MSME Technology Centre, Bhiwadi courses are approved by eminent Government bodies such as AICTE. The combined seats available for various programmes provided by MSME Technology Centre, Bhiwadi goes up to 180.
AskShikshaGPT on App
Download exam sample paper
ICSE
ICSE
RBSE 10th
CBSE 10th
Diploma in Tool and Die Making at MSME Technology Centre, Bhiwadi Entry Requirements
Diploma in Tool and Die Making
at MSME Technology Centre, Bhiwadi
Requirements for 12th grade
- N/A
- Candidate passed 10th/equivalent from any recognized institute/board are eligible to apply.
RBSE 10th
CBSE 10th
ICSE
Other eligibility criteria
Candidate must have passed class 10th examination or its equivalent with Science and Mathematics subjects and secured at least 35% marks from a recognized board.
Diploma in Tool and Die Making at MSME Technology Centre, Bhiwadi Admission Process
Diploma in Tool and Die Making
at MSME Technology Centre, Bhiwadi
Important Dates
ALL
ICSE
CBSE 10TH
RBSE 10TH
Nov 10 - 26, 2025
CBSE 10th-Release of CBSE Class 10 Date Sheet 2026 Phase 1Tentative
Nov 12 - 29, 2025
Release of ICSE Exam Dates 2026Tentative
Dec 15, 2025 - Jan 15, 2026
Release of RBSE 10th Time Table 2026Tentative
Other courses offered by MSME Technology Centre, Bhiwadi
Get best suited colleges for you in real-time
Here’s how it works:
Share your preferences with our assistant
Tell us about your city, course, budget & more
Get recommendations in no time
Discover best colleges that meet all your needs
It won’t take more than a minute!
Read After 10th Diploma reviews from MSME Technology Centre, Bhiwadi
Read ReviewsCompare Courses From Similar Colleges
₹3.99 L
Overall Rating– / –
₹30 K
Overall Rating– / –
₹12.81 K
Overall Rating– / –
– / –
Overall Rating– / –
– / –
Overall Rating– / –
₹1.05 L
Overall Rating– / –
₹5.79 K
Overall Rating4.6
4.6₹66 K
Overall Rating– / –
– / –
Overall Rating– / –
₹66 K
Overall Rating– / –
Similar courses in the same city
Diploma in Mechanical Engineering (Refrigeration and Air-Conditioning) (SF)
Offered by Siddhi Vinayak Group of Colleges₹66 K
Overall Rating– / –
₹90 K
Overall Rating– / –
Diploma in Electrical Engineering
Offered by Northern Institute of Engineering Technical Campus (NIET Alwar)₹66 K
Overall Rating2.6
2.6₹33.9 K
Overall Rating– / –
₹33.9 K
Overall Rating4.6
4.6₹33.9 K
Overall Rating– / –
Diploma in Mechanical Engineering
Offered by Laxmi Devi Institute of Engineering and Technology (LIET)₹66 K
Overall Rating– / –
₹66 K
Overall Rating– / –
– / –
Overall Rating– / –
₹66 K
Overall Rating– / –
Diploma in Tool and Die Making at MSME Technology Centre, Bhiwadi Students also asked
Diploma in Tool and Die Making
at MSME Technology Centre, Bhiwadi
Q: Are there any specializations offered by MSME Technology Centre, Bhiwadi?
ShikshaGPT says A:
MSME Technology Centre, Bhiwadi offers Diploma courses including . Additionally, it also has After 10th Diploma courses. These programs are offerred in Full Time mode. MSME Technology Centre, Bhiwadi has specializations such as After 10th Diploma specializations in Mechatronics Engineering.
AskShikshaGPT on App
Q: How is the faculty at MSME Technology Centre, Bhiwadi?
ShikshaGPT says A:
MSME Technology Centre, Bhiwadi has been rated 5 for faculty as per reviews by students. This shows that Institute has qualified and experienced faculty members.
AskShikshaGPT on App
Q: How much salary does an Engineer get?
ShikshaGPT says A:
The salary of an engineer depends on various factors like specialization, role, organization, and work. The average starting salary in India for a fresh engineering graduate can range from INR 3-5 Lacs per annum. The salaries vary according to the number of years of experience as well as location. Many companies offer greater salary packages in metropolitan cities which are hub for IT companies as well as other reputed MNCs. The salary also varies as per the entry level of the candidate. After gaining experience of 2-5 years, candidates can expect a salary of INR 8-12 Lacs per annum and subsequently shift from technical to managerial positions.
AskShikshaGPT on App
Q: Can you list some important B Tech subjects?
ShikshaGPT says A:
Below are some of the general subjects that you can pick during your BTech studies, as these course will advance your technical and practical knowledge:
Mathematics: A mathematical background includes understanding of Calculus, Linear Algebra, Differential Equations and Statistic Stamina.
Physics: Mechanics, electricity & magnetism, kinetics & dynamics, thermodynamics and wave & optics.
Chemistry: This common general chemistry course involves sub-topics such as organic chemistry, inorganic chemistry among others.
Programming: C+, Python, Java
Engineering fundamentals: Statistics, dynamics, fluids and their action, heat and its work, properties of matter
Engineering design: Aesthetics, reasoning process, design tools and methods, using of computer-aided design (CAD).
Rest, the subjects taught in the BTech courses would be specialization-specific, based on your chosen field.
AskShikshaGPT on App
Diploma in Tool and Die Making
at MSME Technology Centre, Bhiwadi
Student Forum
Anything you would want to ask experts?Content authored by:
Diploma in Tool and Die Making at MSME Technology Centre, Bhiwadi News & Updates
Diploma in Tool and Die Making
at MSME Technology Centre, Bhiwadi
Latest
Popular
Diploma in Tool and Die Making at MSME Technology Centre, Bhiwadi Contact Information
Diploma in Tool and Die Making
at MSME Technology Centre, Bhiwadi
Address
Plot No.871 (A),872,Riico Industrial Estate Pathredi, Bhiwadi
Alwar ( Rajasthan)
Go to College Website ->
Useful Links
Know more about MSME Technology Centre, Bhiwadi
Know more about Programs
- Engineering
- Instrumentation Technology
- Food Technology
- BTech Chemical Engineering
- Aeronautical Engineering
- AI & ML Courses
- BTech Petroleum Engineering
- Metallurgical Engineering
- MTech in Computer Science Engineering
- VLSI Design
- Petroleum Engineering
- BTech Robotics Engineering
- Aerospace Engineering
- BTech in Biotechnology Engineering
- BTech Mechatronics Engineering