Diploma in Civil Engineering colleges in Uttar Pradesh

Candidates should know that salary can be different according to company, location and jobs. AVg. BTech Civil Engineering salary in India can be anywhere between INR 4 LPA and INR 6 LPA.

Also as you gain more experience and learn new skills your salary will increase in the market.

There are a lot of academic institutions in India that provide merit-based admission to the BTech EE course. These colleges mostly conduct additional rounds like the GD or PI round to test the capability of the applicants.

If you have already chosen the Electrical Engineering colleges where you want to study the course, you can simply visit their official websites to check whether they offer merit-based admission or not. Since most of the popular institutes, like the IITs and the NITs, need valid entrance test marks, it is better if you work hard and appear for the entrance exam to have at least one backup option with you.

Some of the key advantages of pursuing Civil Engineering courses after 12th are mentioned below.
Civil Engineers are always in demand because of rapid urbanization and increasing technological advancements which further fuel infrastructural needs.
The construction sector is continuously evolving and never out of demand, hence the need for civil engineers is more with the chances of layoffs being less likely to emerge.
Civil Engineers leave a lasting impact on the society with their involvement in the construction of roads, buildings, airports, etc., where project planning may take up several years and technical expertise.
This field offers people with immense learning opportunities owing to everyday technological innovations and increase in individual demands which requires creativity and an innovative mindset.
Civil engineers hold a valuable and respected position in the society for their contribution towards improvement of communities through structural advancements.

know more about -

Civil Engineering Courses

These three BTech specialisations are one of the most popular ones in India. Candidates can see a general outline of the salary comparison of these three BTech specialisations below – 

Job Levels	Civil Engg	Mechanical Engg	Environmental Engg
Entry	3.1 LPA	3.3 LPA	3.9 LPA
Mid	4.1 LPA	4.4 LPA	4.8 LPA
Senior	6.8 LPA	7 LPA	9.4 LPA

Note: Salary is taken by Ambitionbox.com.

Mechanical Engineering at IIT Kanpur is a 4-year programme offered in full-time mode. The curriculum covers areas such as applied mathematics, scientific computing, and foundational engineering sciences. IITK offers electives in core areas including Fluid Mechanics, Thermodynamics and Structure and Properties of Materials, Engineering Design and Graphics, and Advanced Mechanics of Solids.

Yes a BTech Civil Engineering holds very good and stable career with great investments in infrastructure projects and smart cities in India.

It is not just about old construction roles because graduates are now in demand in areas like structural design, project management and also environmental planning.

It also gives opportunities in top private firms (e.g., L&T, Tata Projects) and government sectors (e.g., CPWD, Railways).

Every course helps you learn some skills that can prove to be helpful in the long run. Some important skills that you can gain after pursuing the BTech Civil Engg. course that can open several doors for you are given below.

• Technical Proficiency
• Project Management
• Problem-Solving Aptitude
• Critical Thinking Approach
• Attention to Detail
• Sustainability Awareness

As a student, I can say that GLA University Greater Noida offers courses at both UG and PG level.

In engineering, there is B.Tech in CSE and also AI/ML as a specialization. Apart from that, the university also offers management courses like BBA and MBA.

The curriculum is quite practical and industry-focused, and we also get exposure through workshops, projects, and other activities, which helps in overall skill development.

No, Integral University does not offer direct admission. The university accepts admission based entrance exams. The university accepts national entrance exams like IUET, MAT, CAT, CUET,  CUET-PG, and others.

No, TMU does not have direct admissions or a Management Quota for any of its courses as such students are selected only through entrance exam scores such as CAT, XAT, MAT, etc. for TMU admissions.

Students can also go for the entrance exam conducted by the university itself if they miss the other exams or don't meet the cutoff.

The college features a Training and Placement Office that sets up campus interviews for students and offers employment prospects. Several firms visit the campus each year for placements at Zakir Husain College of Engineering and Technology Aligarh, including TCS, Snap Deal, and Samsung. Companies are invited to the campus for the placement drive by the Training and Placement Office. The office makes ensuring that students receive the right instruction and develop the skill sets needed to satisfy industry standards. The placement process at Zakir Husain College of Engineering and Technology Aligarh entails inviting recruiting companies and providing them with pertinent information, scheduling pre-placement talks, shortlisting candidates based on their resumes, conducting final and technical interviews, and finally extending job offers to the selected students.

Spread over an area of more than 40 acre, this green campus on NH-19  Chhata, Mathura, Sanskriti University is just 57 km from Delhi NCR. Its strategic location is kind of advantage for the students. There are shopping malls located near the main campus. Hence, studying in this university has various benefits for students. 

IIMT Group of Colleges, Greater Noida offers a large diversity of courses to students in Management field. IIMT Greater Noida admissions are held on the basis of entrance tests. Students seeking course admissions must clear their previous qualifying examination and appear for any of the prescribed entrance exams such as MAT, CAT, CUET, CUET-PG, JEE Main, among others. Students can visit the official website to learn more regarding the course-wise eligibility and specialisation details.

Direct admissions are available for some of the Diploma programmes at United Group of Institutions - UGI Allahabad. For other courses like UG and PG - BTech, MPharma, etc., entrance based admissions are available. 

Kanpur Institute of technology, since its inception in 2004, is one of the finest institutions in Kanpur and Uttar Pradesh as well. It is better for CSE, it is good in terms of placement and the fees depends upon the type of course one wants to study. If we talk about the fees of B.Tech then approximate it's 75000 per year, which is kind of affordable as compared to other colleges which require Lacs of fees.

Goel Group of Institutions has been rated 4.4 for faculty as per reviews by students. This shows that Institute has qualified and experienced faculty members.

Allenhouse Institute of Technology has been rated 4.1 on placements on the basis of 33 reviews done by students.

SVSU Meerut offers UG and PG courses in the field of Humanities & Social Sciences, Teaching & Education and Medicine and Health Science. Under these streem, the college offeres B.E. / B.Tech, B.P.Ed and UG Diploma courses at the undergraduate level. Moreover, it offers PG Diploma and M.P.Ed courses at the postdraduate level.

The average M.Tech CSE salary for fresh postgraduate students is somewhere between 4 and 7 Lakh. For mid-senior level positions, the salary range is slightly higher on the basis of the experience and skills acquired by the individuals over a few years. Their salary would be between INR 7 LPA and INR 10 LPA. For senior-level management positions, the salary in the CSE field is more than INR 10 LPA and can go up to INR 20 LPA as well because of the demand for CSE professionals in this age of digitalization.

Yes, SR Group of Institutions offers scholarships to students. The institute offers different scholarships under various schemes and programmes. SR Group of Institutions offers two sholarships under various schemes which have been discussed below:

·       Prayas Scholarship Scheme

·       SRGI Scholarship

Ambalika Institute of Management and Technology are visited by the top companies for placements. Some of the top recruiters that took part in Ambalika Institute of Management and Technology placements were TCS, Amazon, Walmart, BNY Mellon, etc.

 

The documents required for admission to RR Group of Institutions are:

1)    Marks sheet of class 10th standard

2)    Marks sheet of class 12th standard

3)    Marks sheet of Graduation (if applying for master’s)

4)    Transfer certificate (if required)

5)    Character certificate

6)    Passport-size photographs

 As per the latest report, SRMU University has a dedicated cell which helps the students to get good jobs according to their profile. As per the latest report, 194 recruiters participated in the Shri Ramswaroop Memorial University placement drive. The highest package offered is INR 30 LPA. The top recruiters of SRMU Lucknow are Cognizant, TCS, Tech Mahindra, HDFC Life, Plus Health, AU Bank and others.

The Lucknow Institute of Technology provides modern amenities with state-of-the-art infrastructure to its students. The facilities provided by the institute include an auditorium, lecture halls, computer labs, library, cafeteria, transports, health center, Fatima convent, etc.

Institute of Engineering and Rural Technology, Allahabad has courses such as B.Tech, MBA/PGDM, PGDCA, After 1th Diploma to offer. These courses are in the stream of Engineering, Business & Management Studies, IT & Software. Institute of Engineering and Rural Technology, Allahabad has specializations such as B.Tech specializations in Computer Science Engineering, Electronics Engineering, Industrial Engineering, Civil Engineering, Production Engineering, Instrumentation Technology, Electrical Engineering, Mechanical Engineering, MBA/PGDM specializations in Sales & Marketing, After 10th Diploma specializations in Civil Engineering, Production Engineering, Automobile Engineering, Mechanical Engineering, Tool Engineering, Instrumentation Technology, Electronics Engineering, Electrical Engineering.