Techno India University Kolkata WBJEE Cutoff 2025: Check Round Wise Cutoff Ranks

Techno India University offers admission into B.Tech courses through WBJEE, JEE Main, and Techno Joint Entrance Exam (TNJEE). For BCA and Integrated BCA-MCA, the score for CET/TNJEE score is mandatory. The admission process for other courses at Techno India University, Kolkata, such as B.Arch, B.Pharm, and B.Sc Nursing, may require a valid score in NATA/JEE Mains exam, TNJEE score, and JENPAUH score, respectively. The TNJEE is an entrance exam conducted by Techno India University for admission to various courses at the university.

GATE is not required for B.Pharma admission at Techno India University, Kolkata.

The admission process for the B.Pharma program is based on the candidate's performance in the qualifying examination and the entrance examination conducted by the university.

Candidates are required to appear for the entrance examination with the required documents.

The eligibility criteria for the B.Pharma program is a minimum of 50% marks in the qualifying examination and the required percentage in 10+2.

The WBJEE 2023 cutoff for Round 3 at Techno India University has been released. According to the Techno India University cutoff for Round 3 in 2023, the closing ranks for all B.Tech. specializations ranged from 42319 to 95816. The most competitive specialisation has been computer Science and engineering, with a closing rank of 42319.
On the other hand, JEE Mains is also the way to get a seat at Techno India University for computer science. The overall cutoff can be summarized for JEE-Main as 89555–295479 all- 295479 ALL INDIA general rank. Thus, by 2023 estimates, a candidate would need a rank of around 85000 to 90000 to be on the safe side. 

Candidates are allowed to get admission to the BTech course at Tecno India University without JEE Mains. If the students do not have valid scores in JEE Mains, then they have to secure good scores in the TNJEE entrance examination. JEE (main) ranks have a limited number of seats available (10% of total seats). However, to get admission with JEE main rank, candidates must attend WBJEE counselling. Candiates can also apply for counselling in many other states, such as Gujarat, MP, Uttarakhand, and Maharashtra all use the JEE (mains) score to determine admission.

The latest cutoff information required for admission to the MBA programme at Techno India University might not be publicly available or disclosed until the admission cycle begins. However, you can check the cutoff informations on official page of Techno India University or at Shiksha college panel. 

otherwise the elegiblity criteria is as follows:

Secondary - Minimun 60% (Any Board)

Higher Secondary - Minimun 60% (Any Board)

Techno India Salt Lake WBJEE cutoff 2024 has been released for admission to the BTech courses wherein the Round 2 closing ranks ranged between 6969 and 107575. During the WBJEE 2024 Cutoff, the Round 2 closing rank for BTech in Food Technology course was 71589 for the General AI category candidates. 

Candidates can refer to the table below to check out the Techno India Salt Lake cutoff trends for BTech in Food Technology programme: 

Course	2022	2023	2024
B.Tech. in Food Technology	77234	36889	71589

According to the official data we have, which shows the cutoff of the WBJEE for Techno India University, at round 3 of 2023, a rank of almost 37726 was required in order to get a B.Pharma in the college. And according to the data for 2022, the WBJEE Mop-Up Round Seat Allotment result for BTech was released on September 27. A general all-India rank of 31277 was required to get the major that you are interested in at Techno India University.

 

 

Yes, provided the following qualifying requirements are met, admission to Techno India University's B.Tech programme is easier with a JEE Main score of approximately 75%.Techno India University's minimum JEE Main (Paper 1) percentile requirements for candidates in the general category range from 60 to 70 for various B.Tech programs.
Thus, you can enroll in the majority of Techno India University's B.Tech programs with a 75 percentile JEE Mains score.
However, the cut-off percentiles are higher, ranging from 80 to 85+, for high demand branches like computer science, electronics, and electrical. You could have access to options like mechanical, civil, etc. with a 75 percentile.
In addition to your JEE Mains score, you must have completed your Class 12 education with at least 60% in math, physics, and chemistry.
In conclusion, pay attention to the counseling process.

The eligibility criteria to get admission to BTech courses at Techno India University, candidates are required to qualify for their Class 12 in Science stream with at least an aggregate of 45%. For admission candidates must qualify for either the state or national entrance exam, such as WBJEE, JEE Main, and TNJEE. Admission is based on entrance exam scores and academic performance. Reserved categories may have some benefits in the minimum percentage required.

Candidates seeking admission to the Master of Business Administration (MBA) programme at Techno India University are required to have a minimum of 60% marks in both Secondary and Higher Secondary examinations from any recognised board. Additionally, they should possess a bachelor's degree or its equivalent from a UGC-recognized institution. Furthermore, a valid score in a national-level management entrance examination such as CAT, MAT, or TMAT is mandatory for consideration. These prerequisites ensure that students meet the university's standards for the MBA program. The university provides a range of M.Tech and M.Arch professional degree programs spanning various disciplines, all conducted in a full-time mode on campus for a period of two years. Additionally, an Integrated M.Tech-Ph.D. course is also on offer. Admission avenues include General seats, as well as Sponsored and Management quota seats, ensuring diverse entry pathways for prospective students.

TIU Kolkata offers admission 2023 to undergraduate, postgraduate, diploma and doctoral courses. These include BA, BSc, BCom, BArch, BTech, BPharm, BDes, MDes, MTech, MPharm, MBA, MSc and PhD. Admission to these courses is based on national and state-level entrance exams such as WBJEE, JEE Mains, GATE, CAT/GMAT/MAT/TMAT/JEMAT, NATA, CSAB, and GRE.

The following national level entrance exam results are accepted by Techno India University for admission to its MBA program-

1. CAT - Common Admission Test conducted by IIMs
2. MAT - Management Aptitude Test conducted by AIMA
3. XAT - Xavier Aptitude Test conducted by XLRI
4. CMAT - Common Management Admission Test by AICTE
5. ATMA - AIMS Test for Management Admissions
6. GMAT - Graduate Management Admission Test
7. WBJEE - West Bengal Joint Entrance Examination Board
8. NMAT - Narsee Monjee Management Aptitude Test
9. KMAT - Karnataka Management Aptitude Test
10. JEMAT - Joint Entrance Management Aptitude Test
11. TISSNET - Tata Institute of Social Sciences National Entrance Test.

In addition to these,  Techno India University takes into account the results of its own Techno National Level Test when admitting students for MBA programs.

No, to get admission in Techno India you have to Clear WBJEE or Jee Mains with Good rank depending upon which stream you are interested in.

Few seats are available for JEE (main) ranks (10% of the total seats).You need to appear for the WBJEE counselling and choose your college in the choice list using both JEE (main) and WBJEE ranks or simply using JEE (Main) in order to get admision through JEE main rank.You may get CSE /ECE/IT in TISL if your ranking is somewhat less than 70k.If you are getting core branches like Mechanical or civil please don’t join this college!

Alternatively, you can apply for counselling in many other states.States like Gujrat, MP, Uttarakhand, Maharashtra, all consider Jee (mains) rank for admission into their technical colleges now.

Techno India University offers M.Tech in Mechanical Engineering which is a minimum 2 years programme for those regular students who have completed B.Tech/B.E. in Mechanical Engineering. The subject teaches the principles of mechanics, energy and materials so that the student is equipped with the knowledge of manufacturing devices and machines of all kinds. From Tool Engineering and Design to Computer Integrated Manufacturing and Robotics, the subjects covered through this course are varied and interesting.

It offers 60 seats for M.E/ M.Tech students.