B.Tech. in Mechanical Engineering
2.4 /5- Private Institute
- Estd. 2008
B.Tech. in Mechanical Engineering at ACN College of Engineering and Management Studies Overview
B.Tech. in Mechanical Engineering
at ACN College of Engineering and Management Studies
ACN College of Engineering and Management Studies B.Tech. in Mechanical Engineering is a 4 years UG course provided in a Full Time. The total cost of the programme is INR 2,44,800. Apart from the tuition fee, students are also required to pay an additional fee at the time of admission to ACN College of Engineering and Management Studies. The course offers admission to 120 candidates. Checkout the table below to get an overview of B.Tech. in Mechanical Engineering at ACN College of Engineering and Management Studies:
Total Tuition Fees | ₹2.45 Lakh Get Fees details |
Duration | 4 years |
Course Level | UG Degree |
Mode of Course | Full Time |
Official Website | Go to Website  |
Seat breakup | 120 |
Type of University | Private |
B.Tech. in Mechanical Engineering
Table of content
B.Tech. in Mechanical Engineering at ACN College of Engineering and Management Studies Fees
B.Tech. in Mechanical Engineering
at ACN College of Engineering and Management Studies
The total fee of ACN College of Engineering and Management Studies B.Tech. in Mechanical Engineering is a combination of various components. The ACN College of Engineering and Management Studies B.Tech. in Mechanical Engineering fee is the combination of tuition fees along-with other fees such as one-time admission fees, exam fees, registration fees, etc. It is to note that the tuition fee is calculated basis the first semester, hence the actual amount may vary as other fee components are added as well.
| Fee components | Amount (4 years) |
|---|---|
The mentioned fee is as per AFRC UP. | ₹ 2.45 Lakh |
₹ 2.45 Lakh |
These are based on information available on various sources. Latest values may differ.View scholarships
B.Tech. in Mechanical Engineering at ACN College of Engineering and Management Studies Students Ratings & Reviews
B.Tech. in Mechanical Engineering
at ACN College of Engineering and Management Studies
2.4/5
1 Verified Review- 2-31
Placements1
Infrastructure3
Faculty & Course4
Campus Life2
Value for Money2AR
aquib rza
B.Tech. in Mechanical Engineering - Batch of 2014
Offered by ACN College of Engineering and Management Studies
2.4
1Placements3Infrastructure4Faculty2Crowd & Campus Life2Value for Money
Other: One of the best colleges in Aligarh which provides good faculty, infrastructure and results. Last year district topper was from our college. But when it comes to placement, college is not so good. I would suggest students only to study here and perform better in gate exam, so that you would get your job on your own. Now, coming to infrastructure, it is simple but not so praise worthy. Faculty members are good and experienced, they will help you to sort out your problems. But for poor students, like me this college is very good. They will help you at every moment. Whenever your fees is lacking they will give admit card to sit in semester exams.
Reviewed on 19 Jun 2015Read More
LA
Laeeque Ashfaque
B.Tech. in Mechanical Engineering - Batch of 2015
Offered by ACN College of Engineering and Management Studies
1
1Placements1Infrastructure1Faculty1Crowd & Campus Life1Value for Money
more than 3 years now I have completed my course but still management is not providing degree
Placements: There is no placement cell in this college, No company or recruiting agency had ever visited this College, College lacks its expansion to outer world linkage to placement. If anyone is looking for inhand job or internship with immediate effect after course completion, Never ever go for this college.
Infrastructure: Facilities like Wi-Fi, games room and sports center are not available in entire college or hostel, Classrooms are least equipped with any modern aid, Library constantly lags updated books, no proper mentor or teacher for games or extra curricular activities.
Faculty: Some teachers are qualified and knowledgeable but others lack knowledge as maximum of the teachers are only engulfed in getting fresh admissions in college as this leads to their increment in salary and promotions, Teaching methods are old and lumsy, copying the notes from board which teacher too copies from notes they carry, no industry or proper lab exposures available.
Other: Once in Four year we had annual fest that also to gain some donation from the health minister who was the chief guest of the event.
Reviewed on 26 Mar 2018Read More
View All 2 Reviews
B.Tech. in Mechanical Engineering at ACN College of Engineering and Management Studies Frequently Asked Questions
B.Tech. in Mechanical Engineering
at ACN College of Engineering and Management Studies
Q: Are there any hands-on labs or workshops included in the BTech Mechanical Engineering curriculum?
A:
Yes, the BTech Mechanical Engineering syllabus incorporates both hands-on lab work and intriguing workshops to give a rigorous practical experience to the students pursuing the course so that they are well informed of all the basic concepts of industrial applications, along with theory-based learning in the classroom setting. This further leads to better career prospects and earning opportunities in the future.
AskShikshaGPT on App
Q: Is the BTech Mechanical Engineering syllabus the same for all colleges?
A:
The BTech Mechanical Engineering syllabus is not the same across all colleges, as every college committee sets a particular coursework pattern at the start of every academic year to be followed for the respective batch. The syllabus includes some core subjects, interesting electives, and lab work that gives detailed knowledge to the students about the workings of the field.
Helpful Link: Mechanical Engineering Subjects in Detail
AskShikshaGPT on App
Q: Does BTech Civil Engineering syllabus focus more on theory or practical application?
A:
The BTech Civil Engineering syllabus focuses on both theoretical lectures as well as practical work.
With the help of lectures in the curriculum, theoretical concepts are introduced to students, tutorials provide space for solving problems and applications also.
And the labs offer hands-on experience to students who get acquainted with equipment and CAD software. Also, the field projects also allow students to apply their B Tech Civil Engg. skills and knowledge to design and implement communication systems.
AskShikshaGPT on App
Q: Which courses does ACN College of Engineering and Management Studies offer to students?
A:
ACN College of Engineering and Management Studies offers courses such as BBA, BCA, B.Tech, MBA/PGDM, MCA, After 1th Diploma in the stream of Business & Management Studies, IT & Software, Engineering. ACN College of Engineering and Management Studies has specializations such as B.Tech specializations in Mechanical Engineering, Computer Science Engineering, Civil Engineering, Agriculture & Farm Engineering, Information Technology, Electronics & Communication Engineering, Electrical Engineering, Chemical Engineering, After 10th Diploma specializations in Civil Engineering, Electrical Engineering, Mechanical Engineering.
AskShikshaGPT on App
Download exam sample paper
JEE Main
JEE Main
Want to know more about ACN College of Engineering and Management Studies Scholarship details?
Read about Scholarship
B.Tech. in Mechanical Engineering at ACN College of Engineering and Management Studies Entry Requirements
B.Tech. in Mechanical Engineering
at ACN College of Engineering and Management Studies
UPTAC
JEE Main
Other eligibility criteria
Candidate must have passed class 12th or equivalent by the AIU or Intermediate or 2-year Pre-University exam conducted by a recognized Board/ University with Physics and Mathematics as compulsory subjects along with one of the Chemistry/Biotechnology/Biology/ Technical Vocational subject.
Candidates must have passed class 12th/equivalent examination in 2020, 2021 or appearing in 2022.
There is no age limit for the candidates.
Candidate with below mentioned eligibility are also eligible:
Final examination of the 2-year course of the Joint Services Wing of the NDA.
SSC Examination conducted by the NIOS with a minimum of 5 subjects.
A Diploma recognized by AICTE or a State board of technical education of at least 3 year duration.
2021 onwards Dr. APJ Abdul Kalam Technical University (AKTU), Lucknow will be using the score sheet of JEE (Main) for admission instead of UPCET (Earlier UPSEE).
For more detail, visit - https://jeemain.nta.nic.in/eligibility-criteria/
B.Tech. in Mechanical Engineering at ACN College of Engineering and Management Studies Admission Process
B.Tech. in Mechanical Engineering
at ACN College of Engineering and Management Studies
- CounsellingAdmission is through counselling based on rank obtained in Uttar Pradesh State Entrance Examination (UPSEE). Vacant seats will be filled by the institute based on the rank obtained in JEE-Mains.
Important Dates
ALL
JEE MAIN
UPTAC
Oct 31 - Nov 27, 2025
JEE Main 2026 Registration Session 1
Jan 20, 2026
JEE Main Admit Card 2025 Session 1Tentative
Jan 21 - 30, 2026
JEE Main 2026 Exam Date Session 1
Explore Courses offered by ACN College of Engineering and Management Studies
Select the Degree you are Interested in
Select the Stream you are Interested in
Other courses offered by ACN College of Engineering and Management Studies
Get best suited colleges for you in real-time
Here’s how it works:
Share your preferences with our assistant
Tell us about your city, course, budget & more
Get recommendations in no time
Discover best colleges that meet all your needs
It won’t take more than a minute!
Read B.E. / B.Tech reviews from ACN College of Engineering and Management Studies
Read ReviewsCompare Courses From Similar Colleges
Similar courses in the same city
B.Tech. in Computer Engineering
Offered by Zakir Husain College of Engineering and Technology, Aligarh Muslim University– / –
Overall Rating4.1
4.1₹5.2 L
Overall Rating3.8
3.8₹2.45 L
Overall Rating3.2
3.2₹2.45 L
Overall Rating4.0
4.0B.Tech. in Computer Science and Engineering
Offered by Shivdan Singh Institute of Technology and Management₹2.45 L
Overall Rating4.2
4.2B.Tech. in Computer Science and Engineering
Offered by Institute of Technology Management, Aligarh (ITM Aligarh)₹2.45 L
Overall Rating3.6
3.6₹2.45 L
Overall Rating– / –
₹2.45 L
Overall Rating3.0
3.0B.Tech. in Mechanical Engineering at ACN College of Engineering and Management Studies Students also asked
B.Tech. in Mechanical Engineering
at ACN College of Engineering and Management Studies
Q: How much is the intake across all courses being offerred at ACN College of Engineering and Management Studies?
A:
The overall seats available across all courses offered by ACN College of Engineering and Management Studies is up to 840. Good thing to know is that ACN College of Engineering and Management Studies has courses which are approved by prominent Government bodies like AICTE.
AskShikshaGPT on App
Q: Which major specializations are available at ACN College of Engineering and Management Studies?
A:
ACN College of Engineering and Management Studies offers Degree and Diploma courses including 17 UG and 2 PG courses. Additionally, it also has After 10th Diploma courses. These programs are offerred in Full Time mode. ACN College of Engineering and Management Studies has specializations such as B.Tech specializations in Mechanical Engineering, Computer Science Engineering, Civil Engineering, Agriculture & Farm Engineering, Information Technology, Electronics & Communication Engineering, Electrical Engineering, Chemical Engineering, After 10th Diploma specializations in Civil Engineering, Electrical Engineering, Mechanical Engineering.
AskShikshaGPT on App
Q: What is the eligibility to get admission in ACN College of Engineering and Management Studies for UG/PG courses?
A:
ACN College of Engineering and Management Studies has below criteria for taking admissions to it's various courses:
| Courses | Eligibility |
|---|---|
| BBA | Candidate must have passed 10+2 or equivalent examination from a recognised school/board. |
| BCA | Candidate must have passed 10+2 or equivalent examination from a recognised school/board. |
| B.E. / B.Tech | Candidate must have passed 3-years Engineering Diploma or passed B.Sc and class 12th with Mathematics and obtained minimum 60% marks in aggregate are eligible to apply. |
| MBA/PGDM | Candidate with grace marks are not allowed for admission. Final year students can also apply on provisional basis. |
| MCA | Candidate must have passed Mathematics at 10+2 level or Graduation level. Candidates with grace marks are not allowed for admission. Final year students can also apply on provisional basis. |
| After 10th Diploma | Candidate must have passed class 10th examination with a minimum of 35% marks from a recognised board/Institute. The minimum age is 14 years as on 1st July 2022, i.e. born on or before 01-07-2009. |
AskShikshaGPT on App
Q: Is it worth to consider ACN College of Engineering and Management Studies as a good Institute?
A:
ACN College of Engineering and Management Studies is a reputed institute for BBA, BCA, B.Tech, MBA/PGDM, MCA, After 1th Diploma. Students can opt these programs to pursue their career in Business & Management Studies, IT & Software, Engineering. Institute has trained & experienced faculty who deliver these programs. As per Shiksha verified reviews, ACN College of Engineering and Management Studies has a rating of 3.1 on the basis of reviews by students. Not just this, it has also been rated 3.5 on campuslife, 2.3 on placements, 3.2 on faculty and 3.3 on Infrastructure.
AskShikshaGPT on App
Q: Does ACN College of Engineering and Management Studies provide good placement facilities?
A:
ACN College of Engineering and Management Studies has been rated 2.3 on placements.
AskShikshaGPT on App
B.Tech. in Mechanical Engineering
at ACN College of Engineering and Management Studies
Student Forum
Anything you would want to ask experts?Content authored by:
Colleges in AligarhACN College of Engineering and Management StudiesCoursesB.Tech. in Mechanical EngineeringB.Tech. in Mechanical Engineering at ACN College of Engineering and Management Studies News & Updates
B.Tech. in Mechanical Engineering
at ACN College of Engineering and Management Studies
Latest
Popular
Satyendra Singh · Nov 15, 2025
1.4L views · 56 comments
Satyendra Singh · Nov 15, 2025
5.8L views · 122 comments
Satyendra Singh · Nov 15, 2025
5L views · 245 comments
B.Tech. in Mechanical Engineering at ACN College of Engineering and Management Studies Contact Information
B.Tech. in Mechanical Engineering
at ACN College of Engineering and Management Studies
Address
ACN City
Kasimpur Power House Road
Aligarh ( Uttar Pradesh)
Phone
9997936453
(For general query)
9456618910
(For admission query)
Go to College Website ->
Useful Links
Know more about ACN College of Engineering and Management Studies
- All About ACN College of Engineering and Management Studies
- Courses 2026
- Fees 2026
- Reviews on Placements, Faculty & Facilities
- Admission 2026 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Cut off & Merit List 2026
- Gallery 2026
- Infrastructure Details & Reviews
- ACN College of Engineering and Management Studies Faculty
- Compare ACN College of Engineering and Management Studies
- ACN College of Engineering and Management Studies Q&A
- Scholarships
Know more about Programs
- Engineering
- Mechanical Engineering
- B Tech (Bachelor of Technology)
- Food Technology
- Instrumentation Technology
- BTech Chemical Engineering
- AI & ML Courses
- Aeronautical Engineering
- BTech Petroleum Engineering
- Petroleum Engineering
- VLSI Design
- MTech in Computer Science Engineering
- Metallurgical Engineering
- BTech Robotics Engineering
- BTech in Biotechnology Engineering