Jain Deemed University, Faculty of Engineering and Technology UG, PG Courses 2026

The eligibility criteria for B.Tech at School of Engineering and Technology are as follows:

• The candidates must have graduated from a recognised institution in class 12 with mathematics, chemistry, and physics as required courses.
• Candidates must have completed class 12 with a minimum grade of 60% or above.
• Depending on the college they want to attend, the candidates must take entrance tests like JEE Main, JEE Advanced, BITSAT, VITEEE, LPUNEST, etc.

Regarding the JET exam, several institutions administer it to candidates seeking admission to their B.Tech programs. To gain admission to B.Sc. (Hons.) Agriculture, B.Sc. (Hons.) Horticulture, B.Sc. (Hons.) Forestry, B.F.Sc., B.Tech. (Dairy Technology), and B.Tech. (Food Technology) programs, for instance, Agriculture University, Jodhpur administers the Rajasthan JET. Similar to this, the Film and Television Institute of India administers the FTII JET to candidates seeking admission to a range of film and television courses. TATA Steel administers the TATA Steel JET programme to hire junior engineer trainees.

As such, in order to respond to your inquiry, please be more specific about the JET exam you're referring to as well as the college you're interested in. It is possible to assess your chances of being admitted to B.Tech courses by looking at the anticipated cut-off marks for various JET tests. The number of candidates, the exam's difficulty, the availability of seats, and other variables may cause the cut-off marks to change annually. In order to get the most recent news and information, you should also visit the official websites of the corresponding institutes.

The Faculty has nor released the course-specific average salary. However, the specialisation-wise average package is out. The highest average package stood at INR 9.33 LPA for Civil Engineering. Take a look at the table below to know the specialisation-wise FET Jain University average package for the placements 2025: 

The Faculty of Engineering and Technology (FET) at Jain Deemed-to-be University, Bangalore has overall good placement records for M.Tech, but it is comparatively lesser than B.Tech in the college. The available data suggests that the placement rate for M.Tech is lower compared to B.Tech at the college, as in 2023 placement rate of M.Tech was 10.64%, compared to 54.27% for B.Tech. The average package for M.Tech at the college is INR 5.95 LPA and for B.Tech was INR 6.95 LPA.

Depending on the specific school and program, the admission process for the B.Tech program at the Jain Deemed-to-be University, Faculty of Engineering and Technology can be different. In general, students' results in engineering entrance examinations decide their admission to the B.Tech degree. As per the Class 12 curriculum, the backbone of engineering is emphasized in these entrance exams.

For instance,  BITS Pilani admissions are made based on the scores of the BITSAT entrance tests. Admission to the SCMS School of Engineering & Technology M.Tech course is provided to those who have valid GATE scores. Likewise,  students are required to fill out the KEAM application and obtain a qualifying score at the Rajagiri School of Engineering and Technology.

The Faculty of Engineering and Technology (FET) at Jain Deemed-to-be University, Bangalore, has a strong placement record, but identifying the exact branch with the highest number of placements is challenging due to limited publicly available data. However, the placements in B.Tech. in Computer Science and Engineering are comparatively better, Because the demand for IT is increasing in the market. 

However, every course in this college has a unique value, like B.Tech. in Aeronautical Engineering, B.Tech. in Metallurgical and Materials Engineering and many more, are the courses which have high demand in the market. 

Recruitment also depends upon various factors such as individual skills, academic performance, industry trends, the quality of training and internships offered by the university, and networking abilities.

The 2024 lowest package details have not been disclosed. However, the highest and average salary have been disclosed. The table below presents the placement package for 2024:

Over 3,000 companies have participated in FET Jain University placements so far. This included over 50 international companies. The table below depicts the FET Jain University placement details for 2025 in terms of companies visited:

The placement at the faculty of engineering in Jain deemed to be a University is really worthy and good. The statistics show the following data of 2023 B-Tec and M.Tech placements.

1.B-Tech,407/750 students got placed and its placement rate is 54%. The highest package of INR 30 LPA and the average package of INR 6.92 LPA. 

2. M-Tech, 5/47 students were placed which is 10% placement rate. The highest placement was INR 9 LPA and the average placement of INR 5.85 LPA.

As per the latest report, the Jain University the highest package offered to BTech students during Jain University placements 2024 stood at INR 54 LPA. The same is presented below:

The Faculty of Engineering at Jain deemed to be University offers many B.Tech and M.Tech courses in different specialisation . The ways to take admission into these courses are:

1. Qualify entrance exams JET (Jain University Entrance Test) or othe exams like JET, MBA, CMAT, NMAT, XAT with good score for B-Tech

2. For M.Tech - JET, GATE and AMIE.

3. Admission by considering high scores of other higher level exams are also valid in some extraordinary cases.

4. Direct admission via management quota

 . The ways to take admission into these courses are

1. Qualify entrance exams JET (Jain University Entrance Test) or othe exams like JET, MBA, CMAT, NMAT, XAT with good score for B-Tech

2. For M.Tech - JET, GATE and AMIE.

3. Admission by considering high scores of other higher level exams are also valid in some extraordinary cases.

4. Direct admission via management quota

After the declaration of the CUET score the Faculty of Engineering and Technology, Jain Deemed -to -be University had released its cut off list according to the courses. Since the university accept CUET courses for few course only like B.Sc, BCA and B.Tech, the CUET cut off  list carry information according. The list consists of

1.Name of the course

2.Cut off score category wise (OBC, ST, SC, General and etc.)

3. Seats for the course 

 4. Seats remaining ( in consecutive lists)

Entry into M.Tech course of Jain Deemed University, Faculty of Engineering and Technology is given through entrance examinations such as GATE or JET. Individuals need to hold a BE/BTech degree with an aggregate percentage of at least 50% (45% for SC/ST) with the same/similar specialisation of the M.Tech course. Jain University provides 13 M.Tech specializations for which individual particular eligibility is laid down. Eligible candidates need to apply online and pass the mandatory entrance exam to get admissions.

The University has not released the course-wise the highest package. However, the specialisation-wise the highest package has been disclosed, which is as follows:

Placements for M.Tech. in Environmental Engineering and Management at Faculty of Engineering and Technology college are somewhat okay. According to Review, the college has good placements with an average package of 5 LPA for M.Tech. in Environmental Engineering and Management.

almost 70% of students are placed, with top recruiting companies such as L&T, Mapsko, and Godrej offering average salary packages of 10 LPA.

Greetings,

The faculty members are generally supportive and readily offer assistance as needed. The difficulty level of the semester examinations varies, sometimes being fair and other times challenging. However, the curriculum is designed in such a way to prepare students for their professional careers effectively.

Faculty accessibility is a priority, with teachers being reachable through email, online platforms, and in-person.  Instead of traditional semester exams, this institution follows a term exam system, with each term spanning two months and covering up to three subjects.

For a B.Tech in Computer Science and Engineering (CSE), the Faculty of Engineering and Technology at Jain Deemed-to-be University in Bangalore is very best option.

The university has a very good reputation, delivers high-quality instruction, and gives its students fantastic placement possibilities. There is a supportive learning atmosphere in the university and it guarantees that students acquire the necessary skills for their future employment.

 In addition, the university has a history of excellent placement rates; during the academic year 2021–2022, it placed over 5560 students worldwide, had the highest package of INR 42 LPA, and the average top wage package of INR 6 LPA. Students pursuing a B.Tech in CSE at this institution benefit from a wide range of co-curricular activities, a very friendly environment, and an emphasis on research.

The university offers various courses of undergraduates, postgraduate and doctorate courses in the various fields like management, commerce, design, law among others.

The university conducts its own entrance exam Jain Entrance Test (JET). The candidates will get admission on the basis of JET performance.

Few national-level, exams are also accepted by the university as CAT/MAT/CMAT/NMAT/XAT other than JET.

Students seeking admissions at the Jain Deemed-to-be University, Faculty of Engineering and Technology for M.Tech are required to have a valid score in GATE/JET. Faculty of Engineering and Technology, Jain Deemed-to-be University, Bangalore offers various specialisations under their M.Tech programme.

The CUET score has been released and Faculty of Engineering and Technology, Jain Deemed -to -be University has also released the rank list for CUET counseling. This rank list is based on score from all the participants universities. The university will forward the mail for counseling. There will be minimum 2 rounds of counseling. One of them being in online mode and other face to face.  The selection will be doen on score basis ( cut off) . According to the filling of seats and the remaining seats for the course spot round admission will open. The spot round depend upon the availability of seats. The cut off may get lower considerably as well.