Electronics Engineering colleges in India

Megha Institute of Engineering and Technology For Women has below criteria for taking admissions to it's various courses:

Courses	Eligibility
MBA/PGDM	Candidate must have passed Bachelor Degree (BA / B.Com/ B.Sc/ BBA / BBM / BCA / BE / B.Tech / B. Pharmacy / Any 3 or 4 year Degree except Oriental Languages). Examinations of minimum three years duration with at least 50% marks (45% marks in case of reserved categories) in the qualifying examinations. Final year appearing students may also apply on provisional basis. The minimum age of the candidates should be 19 years as on the date of notification (Candidates whose date of Birth up to 30th MARCH, 2003). No maximum age limit.
B.E. / B.Tech	Candidates who have passed or appeared at the final year of the Diploma examination in Engineering conducted by the State Board of Technical Education and Training, Telangana / Andhra Pradesh or any other examination recognised as equivalent thereto by the State Board of Technical Education and Training, Telangana / Andhra Pradesh. Candidates should have completed 16 years of age, as on 31st December of the year of admission. There is no upper age limit.
After 10th Diploma	Candidates must have passed 10th examination conducted by State Board of Secondary Education, Andhra Pradesh/ Telangana or from any other recognised board in India with Mathematics as one of the subjects, and obtained at least 35% marks in the qualifying examination. Candidate must have passed all the subjects including Mathematics, Physics, Chemistry, with minimum of 35% Marks in each subject. Candidates who appeared or are appearing for SSC or equivalent examination being held in March/April-2023, and whose results are yet to be declared are also eligible.

The faculty at CSI college of engineering are good . Good set of professors are found in this college.Students can reach out to them for any issue . Some Teachers are very supportive. There are different faculty members in different departments. It depends on the students and there relations with the teacher . The code of conduct between the teacher and the student is familiar.The overall faculty members of this college is average. 

JDT Islam Polytechnic College offers courses such as UG Diploma, After 10th Diploma. The courses are available in full-time mode. JDT Islam Polytechnic College has specializations such as Automobile Engineering, Civil Engineering, Computer Science Engineering, Electronics Engineering, Mechanical Engineering.

Jnan Chandra Ghosh Polytechnic College offers various courses like D.Pharma, After 10th Diploma in Medicine & Health Sciences, Engineering stream. Jnan Chandra Ghosh Polytechnic College has specializations such as Civil Engineering, Electrical Engineering, Electronics Engineering, Mechanical Engineering.

Jawaharlal Institute of Technology has below criteria for taking admissions to it's various courses:

Courses	Eligibility
B.E. / B.Tech	Candidate must have completed 10+2 or equivalent with Physics, Maths & Chemistry/ Biotech./ Biology/ Tech. Voc. subject/ Comp. Sc./ IT/ Informatics Practices/ Agriculture/ Engineering Graphics/ Business studies as optional subjects with the above-mentioned aggregate percentage (40% for SC/ST/OBC candidates (except Creamy layer) candidates belonging to Madhya Pradesh) in subjects taken together. Candidates passed 10+2 with grading system, must have grades equi. to mentioned aggregate %. Candidates who had passed 10+2 with grace marks in any subject can also apply provided they have scored mentioned aggregate % excluding grace marks. Result awaited student are also eligible on provisional basis. OR Candidate who have passed Diploma in Engg. & Tech. examination with at least 45% masks (40% marks in case of candidates belonging to SC/ST/OBC (excluding creamy layer) category of Madhya Pradesh) Subject to vacancies in the First Year, in case the vacancies at lateral entry are exhausted.
MCA	Candidate must have completed BCA/ Bachelor Degree in Computer Science Engineering or equivalent Degree or passed B.Sc./ B.Com/ B.A. with Mathematics at (10+2) level or at Graduate level with above mentioned aggregate percentage of any UGC/AICTE approved Indian University or from a foreign University recognised by AIU or Institute recognised by the concerned University as equivalent thereto. The mentioned SC/ST percentage is for Madhya Pradesh residents. Candidates belonging to OBC (excluding creamy layer) categories of Madhya Pradesh can apply with at least 45%. The Bachelor's degree must be of minimum three years duration.
M.E./M.Tech	Candidate must have completed B.E./B.Tech. in relevant branch of Engg./Technology with above mentioned percentage. The mentioned SC/ST percentage is for Madhya Pradesh residents. Candidate belonging to OBC (excluding creamy layer) categories of Madhya Pradesh should have at least 45%. Bachelors degree should be of minimum of four years duration and have been obtained from any AICTE approved institution or Indian University/ Institute or from a foreign University recognised by AIU or any Institutes of national importance (i.e. IITs/ IISc/NITs etc.) duly recognised by the MHRD, as equivalent thereto. Candidates in the Final year of above degree examinations can also apply on provisional basis. Rounding of marks or percentage is not permissible.
After 10th Diploma	Candidate must have passed 10th class examination/SSC examination or equivalent examination from any recognised board/center (10+2) system.

The overall seats available across all courses offered by Sri Krishna Engineering College is up to 366. Good thing to know is that Sri Krishna Engineering College has courses which are approved by prominent Government bodies like AICTE.

Visvesvaraya College of Engineering and Technology has been rated 3.1 on Infrastructure parameter. Visvesvaraya College of Engineering and Technology has also been rated 3.1 for Campuslife.

Jawaharlal Nehru College Of Technology, Rewa has been rated 3.3 for faculty as per reviews by students. This represents that Institute has decent, qualified and experienced faculty members.

The fee bracket for programs offerred by the Bomma Institute of Technology and Science is approximately INR 44700 - INR 252000.

Mandukarrao Pandav College of Engineering, Bhandara offers Degree courses including 5 UG and 1 PG courses. These programs are offerred in Full Time mode. Mandukarrao Pandav College of Engineering, Bhandara has specializations such as B.Tech specializations in Computer Science Engineering, Electrical Engineering, Electronics Engineering, Mechanical Engineering, Civil Engineering.

Government College of Engineering, Dharmapuri has been rated 4.5 on Infrastructure parameter. Government College of Engineering, Dharmapuri has also been rated 3.8 for Campuslife.

The average M.Tech CSE salary for fresh postgraduate students is somewhere between 4 and 7 Lakh. For mid-senior level positions, the salary range is slightly higher on the basis of the experience and skills acquired by the individuals over a few years. Their salary would be between INR 7 LPA and INR 10 LPA. For senior-level management positions, the salary in the CSE field is more than INR 10 LPA and can go up to INR 20 LPA as well because of the demand for CSE professionals in this age of digitalization.

Sree Pashmi Institute of Management and Science has an academic team that has well-qualified faculties. The college has more than 40 staff members and various other non-staff members. Most of the faculty are MPhil and PhD degree holders. Sree Pashmi Institute of Management and Science has around 150 admission counsellors.

IIMT Studies Kochi offers distance and online courses specifically catered to aspirants with at least two-years of work experience. The institute offers eduqual accredited courses at pre-graduate, professional graduate and PG Diploma levels. The eligibility requirements varies course-wise. Admission to all the offered courses is merit-based.

The fees range for courses offerred by the LDC Institute of Technical Studies is around INR 74000 - INR 244800.

Vidyasagar University admission is on both merit and entrance basis. Candidates have to score at least 50% marks in Class 12 for UG courses and at least 50% marks in Bachelor's degree for PG courses. they have to fill the application form of college.

 

 

 

Arunai Engineering College has been rated 3.8 for faculty as per reviews by students. This shows that Institute has qualified and experienced faculty members.

Government Polytechnic College, Amravati has been rated 3.67 on Placements on the basis of 7 reviews given by the students.

G. V. Acharya Institutions of Engineering and Technology has courses such as B.Tech which are primarily in the stream of Engineering. G. V. Acharya Institutions of Engineering and Technology has specializations such as B.Tech specializations in Computer Science Engineering, Electronics Engineering, Civil Engineering, Mechanical Engineering.

VNS Group of Institutions has been rated 3.71 for Faculty as per the Shiksha verified reviews by students. This represents that Institute has decent, qualified and experienced faculty members.

Sri Chaitanya Technical Campus has been rated 3.4 on Infrastructure parameter. Sri Chaitanya Technical Campus has also been rated 3.9 for Campuslife.

Yes, Class 12 marks are sufficient for those seeking admission to undergraduate courses at Chaitanya University. The university offers a variety of undergraduate courses such as BCom, BTech, BPharma, etc. Students can refer to the table presented below to understand the eligibility criteria for each undergraduate course:

Course Name	Eligibility
BTech	Class 12 with a 45% aggregate
BPharma	Class 12 with a 45% aggregate
BCom	Class 12

In order to get admission at IIMT Studies Ghaziabad candidates must keep certain documents ready. Student can check the list of documents below:

• Scanned Class 10, Class 12 and graduation marksheet
• Leaving Certificate
• Aadhaar Card
• Passport-size photograph
• Signature

Note: The list of documents mentioned above are the general documents. For more details visit the official website.

St. Thomas Institute for Science and Technology has placed its selected students in known and reputed companies such as Enorm Investments & Realty Llp, It Perfect Solutions, Green Lotus Group.

Government Polytechnic College, Gulzarbagh offers various courses like After 10th Diploma in Engineering stream. Government Polytechnic College, Gulzarbagh has specializations such as Chemical Engineering, Ceramic Engineering, Civil Engineering, Computer Science Engineering, Electrical Engineering, Electronics Engineering, Mechanical Engineering, Textile Engineering.