M.E. in Welding Technology at Government College of Engineering Overview
M.E. in Welding Technology is one of the most sought-after courses offered by Government College of Engineering, Salem. The duration of the PG level programme is 2 years. The university offers 18 seats for the programme. Government College of Engineering, Salem M.E. in Welding Technology admission is merit-based. On selection, candidates must submit the first instalment of the Government College of Engineering, Salem M.E. in Welding Technology fee. The total tuition fee for the programme is INR 50,000. Check out the following table showcasing the key highlights of M.E. in Welding Technology at Government College of Engineering, Salem:
Total Tuition Fees | ₹50,000 Get Fees details |
Duration | 2 years |
Course Level | PG Degree |
Mode of Course | Full Time |
Official Website | Go to Website  |
Seat breakup | 18 |
Type of University | Private,Autonomous |
- Overview
- Fees
- Placements
- Entry Requirements
- Admission Process
M.E. in Welding Technology at Government College of Engineering Fees
Government College of Engineering, Salem M.E. in Welding Technology fee is an aggregate of several elements, including Tuition Fees, One-Time Admission Fees, Registration Fees, Exam fees, etc. However, students might need to pay some additional charges, depending on the course provided at the college. The total tuition fee for M.E. in Welding Technology at Government College of Engineering, Salem is INR 50,000. For more details about Government College of Engineering, Salem fee breakup for M.E. in Welding Technology, candidates can check the table below:
| Fee components | Amount (2 years) |
|---|---|
The fees might include components other than tuition fees.
Mentioned fee is as per Tamil Nadu Engineering Admission (TNEA- 2023).
The mentioned fee is for Non-Accredited courses.
Only Accredited Fee w The fees might include components other than tuition fees.
Mentioned fee is as per Tamil Nadu Engineering Admission (TNEA- 2023).
The mentioned fee is for Non-Accredited courses.
Only Accredited Fee will be applicable if the program/courses is currently accredited by NBA. If not, then above mentioned fee will be applicable.
Total Accredited fee- INR 60000. | ₹ 50,000 |
₹ 50,000 |
These are based on information available on various sources. Latest values may differ.M.E. in Welding Technology at Government College of Engineering Frequently Asked Questions
ShikshaGPT saysShikshaGPT saysDownload exam sample paper
M.E. in Welding Technology at Government College of Engineering Placements
| Particulars | Statistics (2023) |
|---|---|
| Median Salary | INR 4.20 Lakh |
M.E. in Welding Technology at Government College of Engineering Entry Requirements
- 50%
- Read moreCandidate must have completed B.E./B.Tech. in Mechanical Engg./Mechatronics/Production Engg./Production Tech./Marine Engg./Automobile Engg./Industrial Engg./Metallurgy/Manufacturing Engg./Manufacturing Tech./Aeronautical Engg./Material Science and Engg./Aerospace Tech./Mechanical and Automation Engg./Robotics & Automation/Metallurgical Engineering. Candidate belonging to Tamilnadu BC, BCM, MBC, SC, SCA, ST category must have 45% in qualifying examination. Candidates with B.E./B.Tech. degrees obtained through Distance/Weekend mode are not eligible. Candidates with degree obtained without studying 10th/12th Std. or 3 years degree programme are not eligible. Candidates appearing for the final semester/year are also eligible.
M.E. in Welding Technology at Government College of Engineering Admission Process
Important Dates
Explore Courses offered by Government College of Engineering
Other courses offered by Government College of Engineering
Get best suited colleges for you in real-time
Tell us about your city, course, budget & more
Discover best colleges that meet all your needs
Compare Courses From Similar Colleges
4.6Similar courses in the same city
M.E. in Industrial Safety and Engineering
Offered by Vinayaka Mission's Kirupananda Variyar Engineering College, Vinayaka Mission's Research FoundationM.E. in Computer Science and Engineering
Offered by Sri Shanmugha College of Engineering and TechnologyM.E. in Welding Technology at Government College of Engineering Students also asked
ShikshaGPT saysYes, you can pursue a B.E. in Electrical and Electronics Engineering (EEE) at Government College of Engineering (GCE) Salem through part-time mode. The course is a 4-year undergraduate program at the UG level, admitting 60 students, with a total tuition fee of INR 2.00 Lakh.
The program requires applicants to meet the entry requirements of 75% in 12th grade.
Additionally, the course offers practical problem-solving skills, advanced hardware/software design skills, and industry-standard tools and technologies.
ShikshaGPT saysShikshaGPT saysShikshaGPT saysShikshaGPT says
Student Forum
Anything you would want to ask experts?Content authored by:
M.E. in Welding Technology at Government College of Engineering News & Updates
M.E. in Welding Technology at Government College of Engineering Contact Information
Government College of Engineering ,NH 44, Karuppur
Salem ( Tamil Nadu)
(For general query)
(For admission query)
(For general query)
(For admission query)
Useful Links
Know more about Government College of Engineering
- All About Government College of Engineering
- Courses 2026
- Fees 2026
- Reviews on Placements, Faculty & Facilities
- Admission 2026 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Cut off & Merit List 2026
- Gallery 2026
- Infrastructure Details & Reviews
- Government College of Engineering Faculty
- Compare Government College of Engineering
- Government College of Engineering Q&A
- Scholarships
Know more about Programs
- Engineering
- M.E./M.Tech
- Instrumentation Technology
- Food Technology
- BTech Chemical Engineering
- Aeronautical Engineering
- AI & ML Courses
- BTech Petroleum Engineering
- Metallurgical Engineering
- MTech in Computer Science Engineering
- VLSI Design
- Petroleum Engineering
- BTech Robotics Engineering
- Aerospace Engineering
- BTech in Biotechnology Engineering