

M.Tech. in Mechanical Design
- Public/Government Institute
- Estd. 2008
M.Tech. in Mechanical Design at IIT Patna Overview
IIT Patna offers a 2 years M.Tech. in Mechanical Design programme at the PG level. This course has been ranked #34 by the NIRF 2024. The total tuition fee for the IIT Patna M.Tech. in Mechanical Design course is INR 80,000 for the complete duration. The M.Tech. in Mechanical Design programme accommodates 15 students per batch.
Total Tuition Fees | ₹80,000 Get Fees details |
Duration | 2 years |
Course Level | PG Degree |
Mode of Course | Full Time |
Average package | ₹ 15.00 Lakh |
Official Website | Go to Website |
Seat breakup | 15 |
Type of University | Public/Government,Autonomous |
M.Tech. in Mechanical Design at IIT Patna Fees
IIT Patna - Indian Institute of Technology M.Tech. in Mechanical Design fee is the total of various components, such as the Tuition Fees, One-Time Fees, Registration Fees, Exam Fees, etc. In addition to this, students might be required to pay extra charges specific to the institution. The total tuition fee for M.Tech. in Mechanical Design at IIT Patna - Indian Institute of Technology is INR 80,000. Candidates can check the table below to learn more about IIT Patna - Indian Institute of Technology M.Tech. in Mechanical Design fee breakup:
| Fee components | Amount (2 years) |
|---|---|
Tuition fee is calculated on the basis of 1st year. Actual amount may vary. | ₹ 80,000 |
The fees might include components other than hostel fees. Hostel fee is calculated on the basis of 1st year. Actual amount may vary. Meal Plan is not included in mentioned fee | ₹ 28,000 |
One Time payment includes academic fee | ₹ 20,000 |
₹ 1.28 Lakh |
M.Tech. in Mechanical Design at IIT Patna Frequently Asked Questions
Candidates who wish to apply to the M.Tech programme must have a valid GATE score. Students are screened based on their CGPI in BE/BTech and GATE scores during COAP counselling. However, candidates who have completed their BTech from IITs with a CGPA of 8.0 and above can apply without GATE scores. These applications are reviewed by the respective department (s). Hence, the answer to this question is - yes, it is possible to get into IIT Patna without GATE for MTech.
The average package recorded during IIT Patna MTech placements 2026 (phase 1) was 16.2 LPA. According to the placement brochure 2024-25, average package offered to M.Tech students during IIT Patna placements 2024 stood at around INR 15 LPA.
The average package offered during IIT Patna M.Tech placements over the past three years are presented below:
Course | Average Package (2021) | Average Package (2022) | Average Package (2023) |
|---|---|---|---|
MTech | INR 12.22 LPA | INR 14.99 LPA | INR 15.77 LPA |
Yes, IIT Patna offers good placements to its MTech students. IIT Patna offers good placements in MTech program. MTech highest package 2026 is not released as of now, however, the average package recorded during phase 1 placements 2026 was 16.2 LPA.
Earlier, according to the placement brochure 2024-25, the average package offered during IIT Patna placements 2024 MTech program stood at around INR 15 LPA. The MTech placement rate in 2024 was 61.01%. MTech average package offered in 2023 and 2022 stood at INR 15.77 and INR 14.99 LPA, respectively.
To get admission at IIT Patna, candidate must qualify GATE COAP. IIT Patna GATE COAP cutoff 2024 has been concluded for admission to the MTech courses. In the meantime, students can refer to the table below to check out the GATE COAP 2021 cutoff scores for General AI categories.
The total tuition fee of MTech is INR 80000 to 5 lakh.
- College Reviews
- Campus Life
M.Tech. in Mechanical Design at IIT Patna Rankings
NIRF has ranked IIT Patna's M.E./M.Tech programmes, including the M.Tech. in Mechanical Design course, at #34 for the 2024 academic year. However, candidates must note that this ranking is applicable to the entire M.E./M.Tech and not just the M.Tech. in Mechanical Design course individually. Check out the details of all the rankings received by IIT Patna M.Tech. in Mechanical Design below:
M.Tech. in Mechanical Design at IIT Patna Highlights
- Course curriculum also includes 6-12 months of Internship program
M.Tech. in Mechanical Design at IIT Patna Students Ratings & Reviews
- 4-51
M.Tech. in Mechanical Design at IIT Patna Students also asked
IIT Patna placement 2026 is ongoing and will continue till May 2026. At the end of Phase 1 placement 2025-26, BTech placement rate was 54.34%.
Earlier, the placement rate at IIT Patna stood at 77.92% and 61.01% for BTech and MTech during placements 2024.
The highest package offered during IIT Patna placements 2026 was INR 117 LPA. During the placement drive 2024, it was INR 144 LPA. BTech and MTech average package at the end of Phase 1 placement 2025-26 was INR 25.82 LPA and 16.2 LPA.
Earlier, as per the placement brochure 2024-25, the average package offered during IIT Patna placements 2024 for BTech, M.Tech and MSc programs stood at around INR 17 LPA, INR 15 LPA and INR 7 LPA, respectively.
The course-wise average package offered over the past three years during IIT Patna placements is presented below:
Course | Average Package (2021) | Average Package (2022) | Average Package (2023) |
|---|---|---|---|
BTech | INR 17.13 LPA | INR 28.86 LPA | INR 24.56 LPA |
MTech | INR 12.22 LPA | INR 14.99 LPA | INR 15.77 LPA |
MSc | INR 6.97 LPA | INR 6.86 LPA | INR 9.22 LPA |
IIT Patna offers BTech, MTech, MSc, and PhD programmes through its 10 departments. IIT Patna offers four-year BTech programmes at the undergraduate level in 11 specialisations. A two-year MTech programme in 15 specialisations and two-year MSc programmes in three specialisations at the postgraduate level. All 10 departments of IIT Patna also offer a three-year PhD programme. The mode of IIT Patna admission is online. Admission to BTech is based on JEE Main and JEE Advanced scores, followed by JoSSA counseling. Admission to MTech and MSc is subject to GATE and IIT JAM, respectively.
IIT Patna provides BSc in Computer Science and Data Analytics, which is a good course. The course syllabus is deisgned as per industry standards and provides good placements to students.
IIT Patna gives MCM scholarships to meritorious and needy students. A UG student or a 2-year MSc programme student can receive the MCM scholarship. For new entrants (BTech/MSc 1st year), their SPI will be the criterion for their merit. The minimum SPI is 6.50 and there is no "F" grade in any of the courses in the first semester. For students in their 2nd year (BTech/MSc) onwards, the minimum CPI is 6.50 and there is no "F" grade. For all category students, the annual income of a student's parents or guardians and his family from all sources in the preceding financial year must not exceed INR 4.50 lakh.
Download exam sample paper
M.Tech. in Mechanical Design at IIT Patna Placements
| Particulars | Statistics (2024) |
|---|---|
| Average Salary | INR 15.00 Lakh |
| Highest Salary | INR 40.00 Lakh |
| % Batch placed | 61.01 |
M.Tech. in Mechanical Design at IIT Patna Entry Requirements
M.Tech. in Mechanical Design at IIT Patna Admission Process
- Register and ApplyInterested candidates can apply online/offline with required information.
- Personal InterviewShortlisted candidates will be called for personal interview based on score/marks obtained in GATE/B.Tech Sponsored candidate will be shortlisted based on performance in Written Test conducted by institute. andidate who have completed B.Tech from IIT with minimum CPI of 8.0 are exempted from GATE/Written Test
- Final SelectionCandidates are selected based on marks obtained in GATE/B.Tech and performance in personal interview Sponsored candidate are selected based on performance in written test and personal interview.
Important Dates
M.Tech. in Mechanical Design at IIT Patna Cutoffs
COAP round-wise cutoff Rank: (General-All India)
| Round | 2021 |
|---|---|
| 1 | 640 |
COAP round-wise cutoff Rank: (OBC-All India)
| Round | 2021 |
|---|---|
| 1 | 583 |
Explore Courses offered by IIT Patna
Other courses offered by IIT Patna
Get best suited colleges for you in real-time
Tell us about your city, course, budget & more
Discover best colleges that meet all your needs
Compare Courses From Similar Colleges
Similar courses in the same city
M.Tech. in Computer Science and Engineering
Offered by Birla Institute of Technology, Mesra - Patna Extension CenterStudent Forum
Content authored by:
M.Tech. in Mechanical Design at IIT Patna News & Updates
M.Tech. in Mechanical Design at IIT Patna Contact Information
Indian Institute of Technology Patna,
Bihta
Patna ( Bihar)
(For general query)
(For admission query)
(For general query)
(For admission query)
Useful Links
Know more about IIT Patna
- All About IIT Patna
- Courses 2026
- Fees 2026
- Reviews on Placements, Faculty & Facilities
- Admission 2026 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Cut off & Merit List 2026
- IIT Patna Rankings
- Gallery 2026
- Infrastructure Details & Reviews
- IIT Patna Faculty
- Compare IIT Patna
- IIT Patna Q&A
- Scholarships
- JEE Advanced
- IIT Patna News & Articles
Know more about Programs
- Engineering
- Mechanical Engineering
- M.E./M.Tech
- Food Technology
- Instrumentation Technology
- BTech Chemical Engineering
- AI & ML Courses
- Aeronautical Engineering
- BTech Petroleum Engineering
- Petroleum Engineering
- VLSI Design
- MTech in Computer Science Engineering
- Metallurgical Engineering
- BTech Robotics Engineering
- BTech in Biotechnology Engineering


