Civil Engineering colleges in Maharashtra

The seats availability for offered courses at Government College of Engineering, Karad goes up to 491. Courses offerred by Government College of Engineering, Karad are approved by eminent Government bodies such as AICTE.

The Padmabhooshan Vasantdada Patil Institute of Technology offers degree courses including 6 UG and 5 PG courses. These programs are offerred in full time mode.

B.Tech Specilizations:

• Mechanical Engineering
• Computer Engineering
• Civil Engineering
• Electronics and Telecommunication Engineering
• Mechanical Engineering (Lateral Entry)
• Computer Science and Engineering (Data Science)

M.E./M.Tech Specializations:

• Mechanical Engineering
• VLSI Design
• Computer Science Engineering
• Construction Engineering
• Heat Power Engineering

 

Wainganga College of Engineering and Management admissions are based on entrance exam scores or merit-based. The selection criteria are based on entrance exam scores such as CET/JEE, in-house entrance exams, i.e., MBA entrance exam etc. To get admitted to WCEM, candidates must meet the eligibility criteria set by the college.

Rajarambapu Institute of Technology is a well-known institution for After 10th Diploma, BBA, B.E. / B.Tech, M.E./M.Tech, MBA/PGDM courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, Rajarambapu Institute of Technology has a rating of 4.02 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 4.1 on Campus Life, 3.67 on Placements, 4.11 on Faculty and 4.34 on Infrastructure.

Qualifying Cutoff Marks for Various Courses at Dr. D.Y. Patil Institute of Engineering and Technology

• B.Tech Courses:

1. B.Tech - CSE: The eligibility criteria include passing 10+2 with Physics and Mathematics as compulsory subjects along with Chemistry/Biotechnology/Biology/Technical/Vocational subjects.
2. B.Tech - Bioengineering: Specific cutoff marks were not provided in the official website. However based on the previous year cutoffs above 80 percentiles in JEE can be considered a safe score. 

• MBA Program:

For the Master of Business Administration (MBA) program, the cutoff for the academic year 2023 ranged from 90.5 to 82.14 for the general category.

 

According to Shiksha verified reviews, for the faculty Walchand Institute of Technology have rating of 4.26. It represents that Institute has good, qualified and experienced faculty members.

As per Shiksha verified reviews, Dr. D.Y. Patil College Of Engineering And Innovation has an impressive review rating of 2.76 by 25 students.

Theem College of Engineering offers placement support to its students. Notable organizations that visit the institute for recruitment include Hakimi Techology Solutions, Granular Consultancy Services Pvt Ltd, J B Engineering, Konkan Gyanpeeth College Of Enginerring Karjat, Anantshree Hospital, Vilas Rajapkar Consultancy ( Opc ) Pvtltd, Staff Nurse, Satish Kumar Shukla, Altitude Events, Vijay Springs India Pvtltd, Envoy Hospitalities.

Yes, Government College of Engineering, Aurangabad provides several scholarship programs and fee concessions. Scholarship programs include scholarships for economically backward students, merit-based, minority students, MTech/BTech students, etc. Benefits of these scholarships include covering tuition fee, hostel expense, and other educational expense. GECA also provides monthly stipend to the MTech students who qualify GATE exam with a valid score.

The BTech Civil Engineering syllabus focuses on both theoretical lectures as well as practical work.

With the help of lectures in the curriculum, theoretical concepts are introduced to students, tutorials provide space for solving problems and applications also.

And the labs offer hands-on experience to students who get acquainted with equipment and CAD software. Also, the field projects also allow students to apply their B Tech Civil Engg. skills and knowledge to design and implement communication systems.

Sandip Institute of Technology and Research Centre has below criteria for taking admissions to it's various courses:

Courses	Eligibility
B.E. / B.Tech	Candidate must have completed Diploma Course in Engineering and Technology in relevant stream with minimum 45% marks (40% marks in case of candidates of Backward class categories and Persons with Disability belonging to Maharashtra State only) from an All India Council for Technical Education or Central or State Government approved Institution or its equivalent. OR Candidate must have completed B.Sc. from UGC/ Association of Indian Universities recognised University with at least 45% marks (40% in case of candidates of Backward class categories and Persons with Disability belonging to Maharashtra State only) and passed 10+2 with Mathematics as a subject.
M.E./M.Tech	Sponsored candidate must have minimum of two years of full time work experience in a registered firm/ company/ industry/ educational and/ or research institute/ any Government Department or Government Autonomous Organization in the relevant field in which admission is being sought.
MBA/PGDM	Candidate must have completed minimum three year Bachelor's Degree in any discipline or its equivalent with above mentioned marks (45% in case of candidates of backward class categories and Persons with Disability belonging to Maharashtra State only) from any of the Universities recognised by UGC or AIU.

The seats availability for offered courses at St. Vincent Pallotti College of Engineering and Technology (SVPCET) goes up to 828. St. Vincent Pallotti College of Engineering and Technology (SVPCET) is an engineering college located at Gavsi Manapur, Nagpur, Maharashtra. The institute was founded in 2004 by by The Nagpur Pallottine Society. When the college was established, it was affiliated with Rashtrasant Tukadoji Maharaj Nagpur University (RTMNU). The University Grants Commission (UGC) has since granted autonomous status to St. Vincent Pallotti College of Engineering & Technology.

Amrutvahini College of Engineering has been rated 4.39 for Faculty as per the Shiksha verified reviews by students. This represents that Institute has decent, qualified and experienced faculty members.

The average M.Tech CSE salary for fresh postgraduate students is somewhere between 4 and 7 Lakh. For mid-senior level positions, the salary range is slightly higher on the basis of the experience and skills acquired by the individuals over a few years. Their salary would be between INR 7 LPA and INR 10 LPA. For senior-level management positions, the salary in the CSE field is more than INR 10 LPA and can go up to INR 20 LPA as well because of the demand for CSE professionals in this age of digitalization.

Yes, Ashokrao Mane Group of Institutions (AMGOI) is a good college. The college is accredited by NAAC (National Assessment and Accreditation Council) and NBA (National Board of Accreditation). The flagship programmes offered by the college are BTech and MBA. The placement offered by the college are good. Hence, the future for AMGOI students is secured. 

Sahyadri Valley College of Engineering and Technology is a good institution for B.E. / B.Tech, M.E./M.Tech, After 10th Diploma, UG Diploma, MBA/PGDM courses, and these programs are delivered by highly experienced faculty. Major specialization at Sahyadri Valley College of Engineering and Technology are Civil Engineering, Electronics Engineering, Electronics & Communication Engineering, Mechanical Engineering, Computer Science Engineering, Artificial Intelligence & Machine Learning.

To the point, the Avasari government-run engineering schools like Engineering and Research also offer scholarships like the EBC (Economically Backward Class) Scholarship, GOI Scholarships for SC/ST/OBC applicants, merit-based scholarships, as well as minority and state-sponsored scholarships for any eligible student. They are very helpful to financially weak people as well as sending positive messages on merit. Students can apply through government portals or the college administration.

The fees range for courses offerred by the Anantrao Pawar College of Engineering and Research is around INR 118000 - INR 236000.

Rizvi College of Engineering, Mumbai is a good institution for B.E. / B.Tech courses, and these programs are delivered by highly experienced faculty. Major specialisation at Rizvi College of Engineering, Mumbai are Electronics & Communication Engineering, Electronics Engineering, Computer Science Engineering, Civil Engineering, Mechanical Engineering.

The fees range for courses offerred by the JD College of Engineering and Management is around INR 140000 - INR 319436.

Savitribai Phule Pune University  (also known as UNIPUNE, Pune University and SPPU), is a collegiate public state university. The University is located at Pune, was established in 1949 through Poona University Act and is one of the premier universities in India. Recognised by UGC, it is popularly known as the 'Oxford of the East'. The University is accredited ‘A’ grade by NAAC. With over 40+ academic departments,  10+ faculties and 50+ research centres, the university also has about 300+ recognised research institutes and over 700 affiliated colleges offering UG, PG, diploma, PG diploma, PhD and certificate courses.

The seats availability for offered courses at G H Raisoni Institute of Engineering and Technology, Nagpur goes up to 2439. Courses offerred by G H Raisoni Institute of Engineering and Technology, Nagpur are approved by eminent Government bodies such as AICTE.

As per Shiksha verified reviews, Annasaheb Dange College of Engineering and Technology has an impressive review rating of 3.52 by 76 students.

KDK College of Engineering provides admission based on merit and entrance. However, the final seat allotment is conducted in respect to the entrance exam results. Candidates can apply for admission through the offline form which can be downloaded from the official website. The College considers 45% in Class 12 with Physics and Maths (along with Chemistry/ Biotechnology/ Biology/ Technical/ Vocational subjects/ Computer Science/ Information Technology/ Informatics Practices/ Agriculture/ Engineering Graphics/ Business Studies) and 40% for reserved category. 

For a successful addmission process, candidates must apply through the application form provided on the official website. Candidates will be shortlisted based on the entrance exam scores or percentile. A merit list will be released and candidates will go through the document verification and after paying the fees, candidates will be allotted a seat.   

Imperial College of Engineering and Research popular programmes are MBA & M.E. MBA students are taught subjects like Managerial Accounting, Business Research Methods, Basics of Marketing, Organisational Behaviour, Economic Analysis for Business Decisions, and others. After completing their course from this college, students develop skills like Leadership and Team Work, Entrepreneurship, Social Responsiveness & Ethics,  and others. The M.E. students are taught technical skills so that the students can become better Engineers.