Electrical Engineering colleges in India

Mandava Institute Of Engineering And Technology has below criteria for taking admissions to it's various courses:

Courses	Eligibility
After 10th Diploma	Candidates should have passed S.S.C. Examination (Class 10th) conducted by State Board of Secondary Education, Andhra Pradesh/ Telangana or any other examination recognised as equivalent thereto by the Board of Secondary Education, A.P/TS. such as CBSE, ICSE, NIOS, A.P. Open School Society (APOSS), X class examination conducted by various State Boards of Secondary Education in India with Mathematics as one of the subjects. Candidates belonging to NIOS/APOSS/Other Examinations recognised as equivalent to SSC by A.P. Govt. should have passed all the subjects including Mathematics, Physics, Chemistry, with minimum of 35% marks in each subject. Candidates who appeared or are appearing for SSC or equivalent examination being held in April/ May-2023, and whose results are yet to be declared can also apply. There is no age restriction.
B.E. / B.Tech	Candidates who have passed Diploma in Engineering or any other examination recognised as equivalent there to, from a recognised Institute/ University, Andhra Pradesh/ Telangana are also eligible. Candidates who have appeared in Diploma in Engineering and who are awaiting their results can also apply on provisional basis. Candidates should belong to the state of Andhra Pradesh/ Telangana. Candidate should have completed 16 years of age as of 31st December of the year of admission (2023). There is no upper age limit.
M.E./M.Tech	Candidate must have passsed B.E./B.Tech. in relevant stream and obtained at least 50% marks (45% in case of reserved category candidates) from an AICTE/UGC approved institution recognised by the Government of Andhra Pradesh as equivalent thereto. Final year appearing students may also apply on provisional basis.
MBA/PGDM	Candidate must have completed Bachelor degree of 3/4 years duration with above mentioned marks from any recognised University/Institute. 45% marks for BC categories. Candidate who are appearing for the final year degree examination are also be eligible. Degree obtained by Distance Mode Program should have recognition by Joint Committee of UGC, AICTE and DEC/DEB. Candidate who passed all the subjects of the three years of any Degree course in one sitting is not eligible for admission.

Global College Of Engineering And Technology has below criteria for taking admissions to it's various courses:

Courses	Eligibility
After 10th Diploma	Candidates should have passed S.S.C. Examination (Class 10th) conducted by State Board of Secondary Education, Andhra Pradesh/ Telangana or any other examination recognised as equivalent thereto by the Board of Secondary Education, A.P/TS. such as CBSE, ICSE, NIOS, A.P. Open School Society (APOSS), X class examination conducted by various State Boards of Secondary Education in India with Mathematics as one of the subjects. Candidates belonging to NIOS/APOSS/Other Examinations recognised as equivalent to SSC by A.P. Govt. should have passed all the subjects including Mathematics, Physics, Chemistry, with minimum of 35% marks in each subject. Candidates who appeared or are appearing for SSC or equivalent examination being held in April/ May-2023, and whose results are yet to be declared can also apply. There is no age restriction.
M.E./M.Tech	Candidate must have passsed B.E./B.Tech. in relevant stream and obtained at least 50% marks (45% in case of reserved category candidates) from an AICTE/UGC approved institution recognised by the Government of Andhra Pradesh as equivalent thereto. Final year appearing students may also apply on provisional basis.
B.E. / B.Tech	Candidates who have passed Diploma in Engineering or any other examination recognised as equivalent there to, from a recognised Institute/ University, Andhra Pradesh/ Telangana are also eligible. Candidates who have appeared in Diploma in Engineering and who are awaiting their results can also apply on provisional basis. Candidates should belong to the state of Andhra Pradesh/ Telangana. Candidate should have completed 16 years of age as of 31st December of the year of admission (2023). There is no upper age limit.
MBA/PGDM	Candidate must have completed Bachelor degree of 3/4 years duration with above mentioned marks from any recognised University/Institute. 45% marks for BC categories. Candidate who are appearing for the final year degree examination are also be eligible. Degree obtained by Distance Mode Program should have recognition by Joint Committee of UGC, AICTE and DEC/DEB. Candidate who passed all the subjects of the three years of any Degree course in one sitting is not eligible for admission.

For faculty, Mahamaya Polytechnic College, Sant Kabir Nagar has been rated 3 as per reviews.

The seats availability for offered courses at Guru Teg Bahadur Khalsa Institute of Engineering and Technology goes up to 408. Courses offerred by Guru Teg Bahadur Khalsa Institute of Engineering and Technology are approved by eminent Government bodies such as AICTE.

The seats availability for offered courses at Periyar Centenary Polytechnic College goes up to 480. Courses offerred by Periyar Centenary Polytechnic College are approved by eminent Government bodies such as AICTE.

Some medical field which offer best work and life balance are shown below -

• Dentistry (BDS & MDS) – Fixed clinic hours, fewer emergencies.

• Pharmacy (BPharm & MPharm) – Less stress compared to hospital-based jobs.

• Physiotherapy (BPT & MPT) – Flexible working hours, minimal emergency calls.

• Public Health & Community Medicine – Focus on preventive healthcare rather than emergency treatments.

• Clinical Research & Medical Writing – Research-based work with no direct patient responsibilities.

Raj Kumar Goel Engineering College provides programmes including B.E. / B.Tech, BBA, BCA, B.Com, MBA/PGDM, MCA in streams such as Engineering, Business & Management Studies, IT & Software, Accounting & Commerce, and are excellent for students to build their careers. The institute has specializations in Civil Engineering, Mechanical Engineering, Computer Science Engineering, Information Technology, Electrical Engineering, Electronics & Communication Engineering.

Tatva Institute of Technological Studies, Modasa is a reputed institute for B.Tech, After 1th Diploma, M.E./M.Tech. Students can opt these programs to pursue their career in Engineering. Institute has trained & experienced faculty who deliver these programs. As per Shiksha verified reviews, Tatva Institute of Technological Studies, Modasa has a rating of 1.8 on the basis of reviews by students. Not just this, it has also been rated 1.8 on campuslife, 1 on placements, 2 on faculty and 2.5 on Infrastructure.

Government Polytechnic College, Saran offers various courses like After 10th Diploma in Engineering stream. Government Polytechnic College, Saran has specializations such as Automobile Engineering, Civil Engineering, Computer Science Engineering, Electrical Engineering, Electronics Engineering, Mechanical Engineering.

The seats availability for offered courses at Government Polytechnic College, Srirangam goes up to 300. Courses offerred by Government Polytechnic College, Srirangam are approved by eminent Government bodies such as AICTE.

Government Polytechnic College, Karwar offers various courses like After 10th Diploma, UG Diploma in Engineering, Accounting & Commerce stream. Government Polytechnic College, Karwar has specializations such as Computer Science Engineering, Civil Engineering, Mechanical Engineering, Electrical Engineering, Automobile Engineering.

I.E.C.S Purkhoo College have rating of 5 for the faculty by students. It represents that Institute has decent, qualified and experienced faculty members.

PR Engineering College (PREC, Thanjavur) is a reputed institute for M.Sc., B.Tech, M.E./M.Tech, MCA. Students can opt these programs to pursue their career in Science, IT & Software, Engineering. Institute has trained & experienced faculty who deliver these programs. PR Engineering College (PREC, Thanjavur) has a review rating of 3.4 on the basis of reviews by students. In addition to this, it has been rated 4 on campuslife, 2.9 on placements, 3.3 on faculty and 3.6 on Infrastructure.

Lord Jegannath College of Engineering and Technology (LJCET) has below criteria for taking admissions to it's various courses:

Courses	Eligibility
B.E. / B.Tech	Candidate must have passed VIII, IX, X, XI & XII Std. from schools situated in Tamil Nadu. Tamil Nadu native candidate who have passed any of the VIII, IX, X, XI & XII Std. or their equivalent exam from schools situated outside Tamil Nadu can also apply. They should produce Original Nativity Certificate. Children of Central Government Employees, irrespective of their nativity, provided their parents or guardians (only if both parents are not alive) have been serving in Tamil Nadu continuously for the past five years can be eligible to apply. Sons & daughters of All India service Tamil Nadu cadre officers are eligible to apply. A Self declaration from the parent in this regard is to be produced. Children of employees in the Public Sector or Government recognised institutions had been working in their organisations for the past five years are also eligible, irrespective of their domicile. Other State candidates who have studied VIII, IX, X, XI and XII Std. in Tamil Nadu are eligible to apply.
MBA/PGDM	Candidate who have completed 10+2+AMIE or 10+3 years Diploma + AMIE are also eligible. AMIE candidate must have 2 years regular full time experience in the relevant field.
MCA	Candidate who have completed 10+2+AMIE or 10+3 years Diploma + AMIE are also eligible. AMIE candidate must have 2 years regular full time experience in the relevant field.
M.E./M.Tech	Candidate who have completed 10+2+AMIE or 10+3 years Diploma + AMIE are also eligible. AMIE candidate must have 2 years regular full time experience in the relevant field.

SNM Institute of Management and Technology offers Degree and Diploma courses including 7 UG course. Additionally, it also has After 10th Diploma courses. These programs are offerred in Full Time mode. SNM Institute of Management and Technology has specializations such as B.Tech specializations in Civil Engineering, Computer Science Engineering, Electronics & Communication Engineering, Electrical Engineering, Instrumentation Technology, Mechanical Engineering, After 10th Diploma specializations in Automobile Engineering, Civil Engineering, Electronics & Communication Engineering, Mechanical Engineering.