1 Video,
B.E. in Mechanical Engineering
- B++ NAAC accredited
- Private Institute
- Estd. 2011
B.E. in Mechanical Engineering at DYPSOET Overview
DYPSOET offers various specialisations under its B.E. / B.Tech programme, including B.E. in Mechanical Engineering. This course runs for 4 years. Moreover, the total tuition fee to pursue this course is INR 3,30,960. A total of 120 students can take admission to this course. In order to get admission to DYPSOET B.E. in Mechanical Engineering course, students must have a valid score in MHT CET. Interested students can also check out other B.E. / B.Tech courses of DYPSOET. Also, check out the below table to know more information about B.E. in Mechanical Engineering offered at DYPSOET:
Total Tuition Fees | ₹3.31 Lakh Get Fees details |
Duration | 4 years |
Course Level | UG Degree |
Mode of Course | Full Time |
Official Website | Go to Website  |
Seat breakup | 120 |
Type of University | Private |
- Overview
- Fees
- Student Reviews
- Placements
- Entry Requirements
- + 2 more items
B.E. in Mechanical Engineering at DYPSOET Fees
The DYPSOET B.E. in Mechanical Engineering fees are inclusive of various components, such as examination, medical, seat rent, etc. The tuition fee may subject to vary depending on the category a student belongs to. Refer to the table below for a detailed break-up of DYPSOET B.E. in Mechanical Engineering fees:
| Fee components | Amount (4 years) |
|---|---|
₹ 3.31 Lakh | |
One-time Payment Includes: Admission Form and I-card Fees | ₹ 1,250 |
₹ 3.32 Lakh |
These are based on information available on various sources. Latest values may differ.
B.E. in Mechanical Engineering at DYPSOET Frequently Asked Questions
ShikshaGPT saysYes, Dr. D. Y. Patil School of Engineering and Technology in Pune offers a Bachelor of Technology (B.Tech.) undergraduate program in Electronics & Telecommunication Engineering. The program is approved by AICTE and affiliated with D. Y. Patil University, Pune. The eligibility criteria for the program typically include studying Physics and Mathematics as compulsory subjects in 10+2, along with one of Chemistry, Biotechnology, Biology, or Technical Vocational.
ShikshaGPT saysTo be considered for admission, candidates must meet the following requirements:
Candidates should have a higher senior secondary grade point average (GPA) of at least 50% in Physics, Chemistry, and Mathematics (PCM).
Additionally, candidates must have qualified either MHT-CET or JEE Main.
For M.E. (Master of Engineering) admission at DYPCOE, candidates must have a minimum score of 50% in a relevant B.E./B.Tech field.
It's important to note that the specific admission criteria may vary from year to year and can be influenced by factors such as the number of applicants and the level of competition for admission.
ShikshaGPT saysNo, B.Tech. in Civil Engineering is offered at Dr. D. Y. Patil College of Engineering, Akurdi, Pune, which is a different institute under D. Y. Patil University. However, Dr. D. Y. Patil School of Engineering and Technology in Pune offers other B.Tech. undergraduate programs such as B.Tech. in Electronics & Telecommunication Engineering and B.Tech. in Electronics & Computer Engineering
ShikshaGPT saysAjeenkya DY Patil School of Engineering placements 2023 saw the highest package offered at INR 27 LPA. It was JTP who made the offer. Other than this, the median package awarded during Ajeenkya DY Patil School of Engineering BTech placements 2022 stood at INR 4 LPA according to Ajeenkya DY Patil School of Engineering NIRF report 2023. Furthermore, 81% of the BTech placements at Ajeenkya DY Patil School of Engineering were made during the 2022 placement cycle.
Placements at Ajeenkya DY Patil School of Engineering 2022
The BTech median package offered in 2022 increased by more than 8% when compared to 2021.
ShikshaGPT saysDYPSOET Pune offers a Bachelor of Engineering (BE) lasting four years. BE is a UG-level programme considered equivalent to a BTech. To ascertain if DYPSOET Pune is a good option to pursue BE, candidates must compare it with other similar institutes. Such a comparison may be based on important factors depending on the candidates' preferences and priorities. Some of these comparison factors are listed below:
- College reputation and affiliation
- Location, Infrastructure and facilities
- Course structure and curriculum
- Medium of language in which the course is being offered
- Fees, placements, ROI
- Selection Criteria/Entrance Exams
- Rankings and accreditations
- Student reviews on all the aforementioned factors
Interested candidates can visit 'Compare DYPSOET Pune' for a detailed comparison between the institute and similar universities/institutions.
Download exam sample paper
B.E. in Mechanical Engineering at DYPSOET Placements
| Particulars | Statistics (2022) |
|---|---|
| Median Salary | INR 6.00 Lakh |
Top Recruiters for DYPSOETB.E. in Mechanical Engineering at DYPSOET Entry Requirements
- 45%
- Read moreCandidate must have passed / appearing 10+2 or HSC or equivalent examination with Physics and Mathematics as compulsory subjects along with one of the Chemistry or Biotechnology or Biology or Technical Vocational subject or Computer Science or Information Technology or Informatics Practices or Agriculture or Engineering Graphics or Business Studies and obtained at least mentioned marks in the above subjects taken together, from a recognized board. The mentioned OBC, SC, ST percentage is only applicable to candidates belonging to Maharashtra state.
B.E. in Mechanical Engineering at DYPSOET Admission Process
- CounsellingAdmission is based through counselling based on rank obtained in Maharashtra Common Entrance Test (MHT-CET)
Important Dates
B.E. in Mechanical Engineering at DYPSOET Cutoffs
3JEE Main round-wise cutoff Rank: (General-All India)
| Round | 2021 |
|---|---|
| 1 | 685860 |
JEE Main round-wise cutoff Rank: (OBC-All India)
| Round | 2021 |
|---|---|
| 1 | 685860 |
MHT CET round-wise cutoff Rank: (General-All India)
| Round | 2020 | 2021 |
|---|---|---|
| 1 | - | - |
| 2 | 36.83 | 33.83 |
MHT CET round-wise cutoff Rank: (General-Home State)
| Round | 2021 |
|---|---|
| 1 | 15.22 |
Explore Courses offered by DYPSOET
Other courses offered by DYPSOET
Get best suited colleges for you in real-time
Tell us about your city, course, budget & more
Discover best colleges that meet all your needs
Compare Courses From Similar Colleges
Similar courses in the same city
4.14.3B.Tech. in Computer Science and Engineering
Offered by Symbiosis Institute of Technology, Symbiosis International, Pune4.04.04.03.84.23.94.1B.E. in Mechanical Engineering at DYPSOET Students also asked
ShikshaGPT saysThe fee for B.E. in Automobile Engineering at Dr. D. Y. Patil School of Engineering and Technology is INR 95,168 for the first year. The fee for subsequent years is INR 85,000. It is a four-year full-time undergraduate program in B.E. Automobile Engineering. The program is approved by AICTE and affiliated with D. Y. Patil University, Pune.
ShikshaGPT saysShikshaGPT saysDYPSOET Pune BE cut-off varies depending on the accepted entrance exams that the applicants have appeared for. The entrance exams accepted for BE admission at the college are JEE Main and MHT CET. The factors that affect the cut-off include the difficulty level of the accepted entrance exams, total number of applicants, total number of qualified candidates, availability of seats, etc. The cut-off also varies across the reservation categories of the applicants.
ShikshaGPT saysThe overall cost of the B.E. in ETE programme at the Dr. D. Y. Patil School of Engineering and Technology is around INR 2.24 lakh.
On the college website, there is no mention of the cost of the dorm and mess. You should get in touch with them if you want more detailed information.
Student Forum
Anything you would want to ask experts?Answered 7 years ago
P
Guide-Level 13
Answered 7 years ago
L
Contributor-Level 10
Answered 7 years ago
A
Guide-Level 14
Answered 7 years ago
K
Guide-Level 13
Answered 7 years ago
r
Guide-Level 14
Answered 7 years ago
M
Guide-Level 13
Content authored by:
B.E. in Mechanical Engineering at DYPSOET Take a look at Campus
Campus Building
Fest
Industrial visit
Computer Lab
B.E. in Mechanical Engineering at DYPSOET News & Updates
B.E. in Mechanical Engineering at DYPSOET Contact Information
DY Patil University Pune
Survey 124 &126
MIDC Road, Ambi, Talegaon Dabhade
Pune ( Maharashtra)
(For general query)
(For admission query)
Useful Links
Know more about DYPSOET
Know more about Programs
- Engineering
- Mechanical Engineering
- B Tech (Bachelor of Technology)
- Instrumentation Technology
- Food Technology
- BTech Chemical Engineering
- Aeronautical Engineering
- AI & ML Courses
- BTech Petroleum Engineering
- Metallurgical Engineering
- MTech in Computer Science Engineering
- VLSI Design
- Petroleum Engineering
- BTech Robotics Engineering
- Aerospace Engineering
I completed Diploma and got 68%. I tried in direct 2nd year admission with cap round but couldn't get it. What to do?