Engineering Colleges accepting CUET for B.Tech in India

CUET UG total marks is 250 Marks for each subject. Candidates can choose up to five CUET subjects. Each subject paper has 50 questions which will total to 250 marks for each subject. For every correct answer, candidate will get 5 marks. The CUET total marks will be uniform for all 37 subjects. The Total CUET subjects marks can vary depending on the number of subjects chosen by candidates.

• If three CUET subjects chosen: 750 total marks
• If four CUET subjects chosen: 1000 total marks
• If five CUET subjects chosen: 1250 total marks

CUET UG cut off will vary from course to course and universities. To know the cut off for CUET UG courses, candidates must stay updated with the notification released by the universities for admissions. As per the previous year analysis, candidates can expect the CUET UG cut off for various top courses under Arts, Commerce and Science as mentioned below:

University	CUET cutoff link
Delhi University	CUET DU Cutoff
Allahabad University	CUET AU cutoff
Banaras Hindu University	CUET BHU cutoff

CUET stands for Common University Entrance Test. It is a national level entrance test conducted by National Testing Agency for UG and PG programs. It is a single window examination for admission to universities in India. It is a single window examination for students to apply to multiple universities across India. This examination is compulsory for admission to all central universities in India.

The CUET UG cut off is determined by CUET participating universities seperately. Parameters on the basis of which CUET UG cut off is released are:

• Total number of candidates that appeared for the CUET UG exam
• The number of seats offered by the participating universities through CUET UG
• The difficulty level of the CUET exam
• Overall performance of the test takers (pass percentage/ score range, etc.)

CUET cut off is based on the percentile of the candidate. To calculate the CUET percentile following formula is applied:

100*Number of candidates appeared in the session with a raw score is equal to or less than a candidate/ total number of candidates appeared for CUET UG.

The total fee for BTech range from INR 4.5 lakh -INR 36 lakh. The fee is calculated based on the semester fee.  Admission to BTech course is based on LPUNEST or CUET UG score. After completion of the selection rounds, shortlisted aspirants need to pay the course fee to confirm their admission. Candidates are first required to register with an application fee for LPUNEST. The exam fee for LPUNEST is INR 1,000 for males and INR 500 for females.

CUET UG is conducted for admission to more than 260 universities across India. List of programs offered through CUET UG are:

• Bachelor of Arts (B.A)
• B.A (Hons.)
• Bachelor of Science (B.Sc.)
• Bachelor of Sience (B.Sc.) (Hons.)
• Bachelor of Vocational studies
• B.Sc-M.Sc. Integrated program
• Integrated M. Optometry
• Integrated M.A
• Bachelor of Commerce (B.Com.)
• Bachelor of Commerce (B.Com.) (Hons.)
• Bachelor of Management Studies (BMS)
• Bachelor of Business Administration (Financial Investment Analysis) [BBA (FIA)]
• Bachelor of Business Economics (BBE)
• Bachelor of Elementary Education (B.El.Ed.)
• Bachelor of Fine Arts (BFA)

There are a total of 420 seats for BTech programmes offered at Amity University, Noida. The seat allotment is done based on candidates performance in the last qualifying exam, i.e., Class 12. Additionally, the sanctioned seat intake is also taken into consideration. The university reserves the right to revise a seat count in an admission session. It must be noted that the mentioned seat intake is as per the official website/sanctioning body. It is still subject to changes and hence, is indicative.

Generally, UPES Dehradun does not allow candidates to get direct admissions in the BTech courses. However, there are some exceptions where candidates can apply for UPES Dehradun BTech courses directly with their Class 12 board exam scores.

These exceptions have not been explained on the website thus, candidates should contact the admission desk to learn more about them.

Manipal University Jaipur BTech programme offers excellent global exposure and diverse specialisations for engineering aspirants. Students get to choose from traditional streams or modern fields like Artificial Intelligence and Robotics. Additionally, unique international dual-degree collaborations with reputed foreign universities enhance career prospects.  

Yes, MMMUT Gorakhpur does provide lateral entry to BTech courses. Through lateral entry, students get direct admission to the second year of the BTech course. The selection criteria differ for BTech LE admissions. As per the criteria, students who have done diplomas are required to present a CUET (UG) course. Students who are BSc graduates are required to present a CUET PG score. Moreover, all students are required to participate in the counselling process.

Amity University Gurgaon has a placement cell that ensures assistance to every student. In 2025, 422 recruiters participated and offered various job roles to the batch 2025 in several sectors like E­-Commerce, BFSI, Consulting, Research, etc. 

BTech at Galgotias University is considered among the best options available in Greater Noida. This institute has been rated very high by students for its infrastructure, faculty, placements and BTech fees.

Only a few other engineering institutes are capable of competing with Galgotias University for BTech courses around Greater Noida.

To be eligible for GGSIPU BTech (lateral) admissions, candidates need to clear the BSc course with a minimum aggregate of 60%. Candidates must clear a BSc course with Mathematics as a mandatory subject as well to apply for BTech (lateral) at GGSIPU.

Greetings,

For each of its B.Tech degrees, Maharishi Markandeshwar University (MMU) offers 300 seats.
It's crucial to remember that this figure only reflects the overall number of seats available for all of the B.Tech program's specializations. The precise number of students enrolled in each specialisation may change based on variables such as student preferences and programme popularity.

Regards

No, GLBITM Greater Noida does not take direct admission into its BTech course. Selection of eligible candidates is done based on JEE Mains scores or UPCET score in case of lateral entry.

Candidates can appear for these exams either during or after Class 12 board exams.

The total seat distribution for BTech course at Shoolini University is 645. The seat intake for each courses is listed below:

B.Tech. in Civil Engineering (Environmental Engineering) - 30

B.Tech. in Civil Engineering (Transportation Engineering) - 30

B.Tech. in Civil Engineering (Structural Engineering) - 30

B.Tech. in Civil Engineering - 30

B.Tech. in Mechanical Engineering - 25

B.Tech. in Bioinformatics - 10

B.Tech. in Food Technology Research - 120

B.Tech. in Biotechnology Research - 120

B.Tech. in Computer Science and Engineering (UI/UX) - 30

B.Tech. in Computer Science and Engineering (Data Science) - 55

B.Tech. in Computer Science and Engineering (Cyber Security) - 55

B.Tech. in Computer Science and Engineering (Cloud Computing) - 55

B.Tech. in Computer Science and Engineering (Blockchain and IoT) - 55

The median salary package offered to the students after finishing B.E. / B.Tech from UPES (Admission Office) is INR 50,000 - INR 650,000. While, the Median package offered by The NorthCap University after completion of B.E. / B.Tech is INR 550,000. Basis these stats, UPES (Admission Office) is better option compared to The NorthCap University on the Median salary parameter.

Amity University Jaipur offers BTech course in various specialisations viz., BTech CSE, BTech in Food Technology, BTech in Biotechnology, etc. When it comes to the placements, the University offers decent placements annually. The key highlights of Amity University Jaipur placements for the Class of 2025 are tabulated below:

Particulars	Placement Statistics (2025)
the highest package	INR 22.21 LPA (UG) INR 8 LPA (PG)
Average package	INR 5.05 LPA (overall) INR 4.76 LPA (UG) INR 5.79 LPA (PG)
Median package	INR 4 LPA (Overall) INR 3.84 LPA (UG) INR 4.80 LPA (PG)
Total recruiters	623
Students placed	497
Students placed with multiple offers	604

KIET Ghaziabad has mentioned that it can allow candidates to apply for BTech admissions through their Class 12 board exam scores. However, it only does so under special circumstances which have not been mentioned.

Thus, it is possible to apply for BTech at KIET Ghaziabad directly after completing Class 12th. Candidates will need to contact the admission desk to find what conditions must be met to get direct admission.

The course-wise placement stats are yet to be released on the official website. Meanwhile, check out the overall highlights of Integral University placements for the overall Class of 2025 from the table below:

Particulars	Placement Statistics (2025)
Highest package	INR 26 LPA
Total recruiters	260+
Total offers	1225+
Placement Rate	90%

National Testing Agency (NTA) will announce the CUET 2025 exam date anytime soon at nta.ac.in. It is expected that CUET UG 2025 exam will be held in May/June. The exam will be conducted in multiple slots each day. The number of CUET exam slots will depend upon the number of candidates registered for the exam.

To be eligible for admission to BTech at Ramdeobaba University candidates are required to pass Class 10 and Class 12 from a recognised board. Further, candidates must appear for the accepted entrance exam JEE Main, MHT CET, RUBEE and CUET. After fulfillment of the eligibility criteria, candidates are required to visit the official website of the university to apply online.

The total number of seats in B.Tech programme of SMVDU is 350.

These 350 are classified as :

110 for computer Science engeenering,  

90 for electronics and communication engeenering,  

60 for mechanical engineering,  

60 for civil engineering,  

And 30 for electrical engineering.