B.Tech. in Manufacturing Technology
3.6 /5- Public/Government Institute
- Estd. 1968
B.Tech. in Manufacturing Technology at Central Institute of Plastics Engineering and Technology, Ahmedabad Overview
B.Tech. in Manufacturing Technology
at Central Institute of Plastics Engineering and Technology, Ahmedabad
The Central Institute of Plastics Engineering and Technology, Ahmedabad B.Tech. in Manufacturing Technology course is a 4 years programme offered at the UG level. To gain admission to the B.Tech. in Manufacturing Technology at Central Institute of Plastics Engineering and Technology, Ahmedabad, applicants must meet the necessary eligibility criteria. The programme has a seat intake of 60 students. The Central Institute of Plastics Engineering and Technology, Ahmedabad B.Tech. in Manufacturing Technology tuition fee is INR 2,60,000. Additionally, the Central Institute of Plastics Engineering and Technology, Ahmedabad fee structure for the B.E. / B.Tech encompasses various components, including tuition fees, lab fees, library fees, and more. For further information, prospective candidates can refer to the following table:
Total Tuition Fees | ₹2.60 Lakh Get Fees details |
Duration | 4 years |
Course Level | UG Degree |
Mode of Course | Full Time |
Official Website | Go to Website  |
Seat breakup | 60 |
Type of University | Public/Government |
B.Tech. in Manufacturing Technology
Table of content
- Overview
- Fees
- Student Reviews
- Entry Requirements
- Admission Process
- + 1 more item
B.Tech. in Manufacturing Technology at Central Institute of Plastics Engineering and Technology, Ahmedabad Fees
B.Tech. in Manufacturing Technology
at Central Institute of Plastics Engineering and Technology, Ahmedabad
Central Institute of Plastics Engineering and Technology, Ahmedabad B.Tech. in Manufacturing Technology Fee is the aggregate of various components, including the one-time registration fee, tuition fee, and exam fee. There could possibly be other charges that the students need to pay as required by the college from time to time. The Central Institute of Plastics Engineering and Technology, Ahmedabad B.Tech. in Manufacturing Technology fee breakup can be checked below:
| Fee components | Amount (4 years) |
|---|---|
Tuition fee is calculated on the basis of 1st year/semester. Actual amount may vary.
The fees might include components other than tuition fees.
Mentioned fee is as per Fee Regulatory Committee (Techni Tuition fee is calculated on the basis of 1st year/semester. Actual amount may vary.
The fees might include components other than tuition fees.
Mentioned fee is as per Fee Regulatory Committee (Technical), Gujarat. | ₹ 2.60 Lakh |
₹ 2.60 Lakh |
These are based on information available on various sources. Latest values may differ.Video stories
- Eligibility & Cut Offs
SS
Sanskar Singh
B.Tech. in Manufacturing Technology - Batch of 2016
Offered by Central Institute of Plastics Engineering and Technology, Ahmedabad
4.4
4Placements5Infrastructure4Faculty4Crowd & Campus Life5Value for Money
It is the best college in Lucknow. Most of the people don't know about this college.
Placements: In my batch, there were 50 students in which 35 got campus selection, and a few had qualified GATE, and the rest went for higher studies. The companies, who came for campus selection were good, and it provides good salary for fresher and also appropriate work. A few MNCs companies also came for campus selection.
Infrastructure: CIPET has the largest plastics testing and processing tool lab in India. At a hostel, there are Wi-Fi facility, geyser, and much more were there for the students. The whole campus is Wi-Fi enabled. On the campus, there are volleyball, cricket, and floorball grounds. Every year, there is a fest for four days called ANANT.
Faculty: The course is wide, and there are 48 subjects in full B.Tech with practical and theory also. The faculty members are highly educated and came from IIT's or the other reputed institutes. They are supportive in every scenario whether it is study, games, or other activities. Most of them are of the same age.
Reviewed on 23 Mar 2018Read More
AS
Arjun singh
B.Tech. in Manufacturing Technology - Batch of 2020
Offered by Central Institute of Plastics Engineering and Technology, Ahmedabad
4
4Placements4Infrastructure5Faculty4Crowd & Campus Life3Value for Money
CIPET college is good because of good faculty and good placements in 2017.
Placements: In the previous year, 6 MNCs and 4 national companies have visited the campus for placements. Almost 70% of the students were placed. The highest package offered was 24 LPA by a foreign company, and 3.20 LPA was the minimum package. The average package offered is around 5 LPA. All the companies have visited the campus. Sales manager, engineer, etc. are the roles offered to the students. Almost 95% of the students got internships from the campus. A placement cell is present on the campus, and it is very efficient and useful for students.
Infrastructure: All the facilities like labs, Wi-Fi, classrooms, library, medical facilities, sports, games, canteen, tool room, etc. are available on the campus. The quality of the food is good, and the hostel rooms are also good. I have not faced any infrastructure related issues during my tenure at the college.
Faculty: The teachers are helpful and very knowledgeable, and 40% of the teachers are PhD holders. The teaching quality is also great because they teach normally and don't pressurise the students. Some teachers do not give more assignments, and the behaviour of the teachers with students is very simple and friendly.
Other: Events like Annant which is a cultural fest and Cporeaia which is a sports fest were organised.
Reviewed on 26 Feb 2018Read More
NS
Nilay Sontakke
B.Tech. in Manufacturing Technology - Batch of 2018
Offered by Central Institute of Plastics Engineering and Technology, Ahmedabad
3
2Placements4Infrastructure3Faculty3Crowd & Campus Life3Value for Money
New field. Good structure and infrastructure. The placement is quite good.
Placements: Placement is not as good as in other colleges. It's a risk if a student believes that he/she will be getting a placement.
Overall, the college has only 60-70 % placement and that too in middle-level firms.
The companies recruit at wages of 15-25k per month for a fresher.
The highest package has been 50k per month by Toshiba.
Infrastructure: The design is overall good as compared to other colleges.
The structure is earthquake resistant.
The location of the area is factory zone area where pollution is there, but it doesn't affect the campus.
The hostel is getting built up. It will be ready by the new year (2018). The hostel design and structure are good.
Faculty: The faculty members are quite good but a student must prepare and study himself. He doesn't need to be dependent on the college.
There are qualified professors in the college.
There are also faculty members from all over India.
The college comes under GTU (Gujarat Technical University).
The course curriculum is useful not very much.
The student-faculty ratio 60:1.
Other: The college is good. There is no ragging and no such issues. High security.
The campus has many academic sections- degree, diploma, and short-term courses.
Diploma in this college is nice as compared to other colleges.
The university has all its functions running fully online.
Reviewed on 12 Oct 2017Read More
RJ
Rishika Jain
B.Tech. in Manufacturing Technology - Batch of 2016
Offered by Central Institute of Plastics Engineering and Technology, Ahmedabad
3.6
4Placements4Infrastructure3Faculty2Crowd & Campus Life5Value for Money
A good plastic technology college.
Placements: A mass recruitment is not there.
Most of the companies recruit in sales and marketing unlike core placements.
Very few students were placed in my branch.
But in plastic technology, more students were placed. All the students get internships.
The highest salary was 6 LPA and the lowest was 1 LPA.
Infrastructure: There is only one building. You need not get placed outside because CIPET has an in-built plastic industry which can cater to your R&D needs and projects. There is a huge CNC and every aspect of the industry is there, required for plastic production.
Faculty: Although the course curriculum is nice, the faculty team is on a contractual basis.
They are the worst, though, and students need to obey irrelevant rules imposed on them. In addition to this, we cannot protest against them.
The faculty members will interfere in functions, programmes, everywhere.
Reviewed on 1 Aug 2017Read More
NG
Nirajkumar Gupta
B.Tech. in Manufacturing Technology - Batch of 2016
Offered by Central Institute of Plastics Engineering and Technology, Ahmedabad
3.4
4Placements4Infrastructure3Faculty2Crowd & Campus Life4Value for Money
Average satisfaction because of faculty, good placements in 2016, really good infrastructure.
Placements: The lowest and highest stipend packages of the placement start from 12,000 INR to 16,000 INR. The placement campus is also good in CIPET, Ahmedabad. About 90% of students got the placement from the 2016 batch. Placements for our batch are completely satisfactory. CIPET is improving the placement unit for senior batches. Companies which visited are Sunrise Industries limited, Windsor Limited, Marudhar Packaging Solutions, Kiri Dyes and Chemicals, Sai Wire Cut Limited and much more.
Infrastructure: The campus is having facilities such as Wi-Fi with 7.2 Mbps Internet speed. Classrooms are neat and clean, and the most impressive part of the classrooms is two opposite sides full of mirrors and it is also with a black film, which we are using in car windows. The library is quite good, but the sports and games activity needs to be improved. The college hostels are not so good- they are average. The food availability in canteens is not good.
Faculty: Well, the faculty team is not so good as I thought while taking admission- they are average. They are helpful, qualified and knowledgeable, but they are not teaching in the proper ways. Only 1/4 part of the syllabus has been taught per semester. I got the industry exposure with many companies such as Windsor Machines, Sunrise Industries limited and much more. The course of manufacturing engineering is useful for me. I will suggest to everyone- "Choose different from others".
Reviewed on 30 Mar 2017Read More
View All 7 Reviews
Download exam sample paper
GUJCET
GUJCET
JEE Main
B.Tech. in Manufacturing Technology at Central Institute of Plastics Engineering and Technology, Ahmedabad Entry Requirements
B.Tech. in Manufacturing Technology
at Central Institute of Plastics Engineering and Technology, Ahmedabad
General
Requirements for 12th grade
- 45%
- Candidate must have passed or appeared for Class 12 or equivalent and secured the mentioned marks (40% for the reserved category). Candidate must have studied Physics, Chemistry, and Mathematics as the main subject.
GUJCET
JEE Main
Other eligibility criteria
NA
B.Tech. in Manufacturing Technology at Central Institute of Plastics Engineering and Technology, Ahmedabad Admission Process
B.Tech. in Manufacturing Technology
at Central Institute of Plastics Engineering and Technology, Ahmedabad
- Register and ApplyInterested candidates can apply online/offline with required information
- Merit ScreeningAdmission is based on the marks obtained in JEE Mains
Important Dates
ALL
GUJCET
JEE MAIN
Oct 1 - 31, 2025
JEE Main 2026 NotificationTentative
Oct 1 - 31, 2025
JEE Main 2026 Registration Session 1Tentative
Dec 12, 2025 - Mar 31, 2026
GUJCET 2026 Application FormTentative
B.Tech. in Manufacturing Technology at Central Institute of Plastics Engineering and Technology, Ahmedabad Cutoffs
B.Tech. in Manufacturing Technology
at Central Institute of Plastics Engineering and Technology, Ahmedabad
3Gender
Quota
Category
GUJCET round-wise cutoff Rank: (General-All India)
| Round | 2018 | 2019 | 2021 |
|---|---|---|---|
| 1 | 37582 | 33208 | 32457 |
| 2 | 33102 | - | - |
GUJCET round-wise cutoff Rank: (General-Home State)
| Round | 2021 | 2024 | 2025 |
|---|---|---|---|
| 1 | 32457 | 30309 | - |
| 2 | 24806 | - | 25289 |
GUJCET round-wise cutoff Rank: (OBC-Home State)
| Round | 2021 |
|---|---|
| 1 | 32457 |
Explore Courses offered by Central Institute of Plastics Engineering and Technology, Ahmedabad
Select the Degree you are Interested in
Select the Stream you are Interested in
Other courses offered by Central Institute of Plastics Engineering and Technology, Ahmedabad
Get best suited colleges for you in real-time
Here’s how it works:
Share your preferences with our assistant
Tell us about your city, course, budget & more
Get recommendations in no time
Discover best colleges that meet all your needs
It won’t take more than a minute!
Read B.E. / B.Tech reviews from Central Institute of Plastics Engineering and Technology, Ahmedabad
Read ReviewsCompare Courses From Similar Colleges
Similar courses in the same city
₹10.2 L
Overall Rating4.3
4.3B.Tech. in Computer Science and Engineering (Artificial Intelligence and Machine Learning)
Offered by Adani Institute of Infrastructure Engineering₹7.28 L
Overall Rating3.9
3.9₹8.49 K
Overall Rating4.4
4.4B.Tech. in Computer Science and Engineering
Offered by L.J. Institute of Engineering and Technology (L.J.I.E.T)₹2.92 L
Overall Rating3.9
3.9₹6.36 L
Overall Rating4.3
4.3₹6 K
Overall Rating4.2
4.2₹5.46 L
Overall Rating4.0
4.0₹4.03 L
Overall Rating3.7
3.7
B.Tech. in Manufacturing Technology
at Central Institute of Plastics Engineering and Technology, Ahmedabad
Student Forum
Anything you would want to ask experts?Content authored by:
Colleges in AhmedabadCentral Institute of Plastics Engineering and Technology, AhmedabadCoursesB.Tech. in Manufacturing TechnologyB.Tech. in Manufacturing Technology at Central Institute of Plastics Engineering and Technology, Ahmedabad News & Updates
B.Tech. in Manufacturing Technology
at Central Institute of Plastics Engineering and Technology, Ahmedabad
Latest
Popular
UPASANA PRADHAN · Oct 3, 2025
1.8L views · 3 comments
Satyendra Singh · Oct 3, 2025
77.2K views
Satyendra Singh · Oct 3, 2025
1.4L views · 56 comments
B.Tech. in Manufacturing Technology at Central Institute of Plastics Engineering and Technology, Ahmedabad Contact Information
B.Tech. in Manufacturing Technology
at Central Institute of Plastics Engineering and Technology, Ahmedabad
Address
Plot No. 630, Phase-IV,
GIDC, Vatva,
Ahmedabad
Ahmedabad ( Gujarat)
Phone
Email
Go to College Website ->
Useful Links
Know more about Central Institute of Plastics Engineering and Technology, Ahmedabad
- All About Central Institute of Plastics Engineering and Technology, Ahmedabad
- Courses 2026
- Fees 2026
- Reviews on Placements, Faculty & Facilities
- Admission 2026 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Cut off & Merit List 2026
- Gallery 2026
- Infrastructure Details & Reviews
- Central Institute of Plastics Engineering and Technology, Ahmedabad Faculty
- Compare Central Institute of Plastics Engineering and Technology, Ahmedabad
- Central Institute of Plastics Engineering and Technology, Ahmedabad Q&A
Know more about Programs
- Engineering
- Mechanical Engineering
- B Tech (Bachelor of Technology)
- Instrumentation Technology
- Food Technology
- BTech Chemical Engineering
- Aeronautical Engineering
- AI & ML Courses
- BTech Petroleum Engineering
- Metallurgical Engineering
- MTech in Computer Science Engineering
- VLSI Design
- Petroleum Engineering
- BTech Robotics Engineering
- Aerospace Engineering