PVPIT Pune Course Admissions 2025: Fees, Eligibility, Dates & Selection Process

PVPIT Pune admission to BCA is entirely entrance-based. Candidates are required to qualify for a state-level MAH MCA CET, which is conducted by Maharashtra State Common Entrance Test Cell. Further, candidates who passed Class 12 with minimum 50% aggregate from a recognised board are eligible to sit for the exam and apply for the course. At last, the final seat allotment to selected students is done through CAP counselling process over 120 seats.

JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology is a well-known engineering institute located in Pune, Maharashtra. It was established in academic year 2006-07. To join JSPM - TSSM's PVPIT an aspirant is required to score minimum 50 percent in his 10+2 board examination (Science Stream).Furthermore, cracking JEE-MAINS and MAH-CET is required to be qualify for getting admission in JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology.

Joint Entrance Examination – Main (JEE-Main), formerly All India Engineering Entrance Examination (AIEEE), is an Indian standardised computer-based test for admission to various technical undergraduate programs in engineering, architecture, and planning across colleges in India. The exam is conducted by the National Testing Agency for admission to B.Tech, B.Arch, etc. programs in premier technical institutes such as the National Institutes of Technology (NIT) and Indian Institutes of Information Technology (IIIT), which are based on the rank secured in the JEE-Main. It is usually conducted twice every year. Since mid of 2019, the JEE has been conducted fully online as a computerised test. 

Hence, to be eligible an aspirant need to crack JEE-MAINS including JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology.

JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology is governed by The Shetkari Shikshan Mandal, a charitable Trust registered under Bombay Public Trust Act 1950 and Societies Registration Act 1860. There are several different options available for students to choose from at the PVPIT at JSPM-TSSM. It provides five full-time undergraduate and five full-time graduate degree programmes. The college also enjoys a stellar reputation for providing engineering-related programmes like B.E./B.Tech and M.E./M.Tech. These are the courses available to students. Some other courses in which the PVPIT has developed expertise over time through the training and experience of its faculty in the fields of mechanical engineering, civil engineering, electronics engineering, computer Science engineering, VLSI design, and construction engineering.

Padmabhooshan Vasantdada Patil Institute of Technology, part of JSPM - TSSM offers Five undergraduate and five graduate courses. These courses are available full-time. A few of the specializations offered by JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology are B.Tech in Mechanical Engineering, Civil Engineering, Electronics Engineering, and Computer Science Engineering, and M.E./M.Tech in Mechanical Engineering, VLSI Design, Computer Science Engineering, and Construction Engineering.

• Entrance exam accepted for B.Tech are JEE mains, MHT CET.
• Entrance exam accepted for M.Tech are GATE, MHT CET M.Tech. 

The Padmabhooshan Vasantdada Patil Institute of Technology offers degree courses including 6 UG and 5 PG courses. These programs are offerred in full time mode.

B.Tech Specilizations:

• Mechanical Engineering
• Computer Engineering
• Civil Engineering
• Electronics and Telecommunication Engineering
• Mechanical Engineering (Lateral Entry)
• Computer Science and Engineering (Data Science)

M.E./M.Tech Specializations:

• Mechanical Engineering
• VLSI Design
• Computer Science Engineering
• Construction Engineering
• Heat Power Engineering

 

JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology is a well known Institute located in Pune, Maharashtra. It was established in 2006. The Padmabhooshan Vasantdada Patil Institute of Technology (PVPIT) at JSPM-TSSM offers ten programmes with tuition ranging from Rs. 186,000 for the M.E. in Computer Engineering to Rs. 353,556 for the B.E. in Computer Engineering. Furthermore, B.Tech total tuition fees is 2.7L-3.5L while total tuition fees for pursuing M.Tech is 1.9L - 2.2L.

MAH CET score depends what programme you are going to pursue, For mechanical engineering you need to score more than 35.62 percentile, For BE Electronics and Telecome engineering you need to score more than 83.56 percentile, For BE Artificial Intelligence and Data Science you need to score 90.29 percentile, For BE Computer engineering you need to score 92.5 percentile. MAH CET is a hard exam but if you study consistently you can manage to score better for and crack JSPM-TSSM cutoff and increase opportunities to get best placements from in-campus.

The overall seats available across all courses offered by JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology is up to 588. Good thing to know is that JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology has courses which are approved by prominent Government bodies like AICTE.

JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology provide five different courses for pursuing M.E/M.Tech.Seat allocation for the M.E/M.Tech courses are as follows in PVPIT-

M.E in Computer engineering -24 seats, M.E in Machin Design-24 seats, M.E in Construction Management -24 seats, M.E in Heat Power Engineering -12 seats, M.E in VLSL- 24 seats

Padmabhooshan Vasantdada Patil Institute of Technology Pune offers UG and PG courses under various specilizations in full-time mode. The candidate must have successfully completed a Diploma programme in engineering and technology in a relevant field with at least 45% marks (40% for candidates from Maharashtra State-only Backward Class categories and Persons with Disabilities). The programme must have been approved by the Central or State Government, the All India Council for Technical Education, or an equivalent body. or The candidate must have passed 10+2 with mathematics as a subject and earned a B.Sc. from a UGC/Association of Indian Universities recognised university with at least 45% marks (40% in the case of candidates from Backward class groups and Persons with Disability belonging to Maharashtra State alone). Yes, you can get into PVPIT Pune with 70% in JEE Mains by counselling.

The candidates can find the PVPIT Pune cutoff by visiting the official website of the Padmabhooshan Vasantdada Patil Institute of Technology. After the release of the Round 8 Seat Allotment Results, PVPIT Pune JEE Mains cut off 2023 for BTech was completed. The Round 1 and Last Round closing ranks for B.Tech in Computer Science and Engineering (Data Science) remained at 138761 and 103708, respectively, for the General All India category students, according to the PVPIT Pune BTech cut off 2023.

The Padmabhooshan Vasantdada Patil Institute of Technology Pune offers UG and PG courses and to get admission into them aspirants have to meet the criteria set by the institute to go ahead with the selection process.

• Candidates need to score a minimum of 50% in 10+2 board examinations in Science Stream.
• Or should have a Diploma degree in Engineering.
• Secure qualifying marks in JEE-MAINS and MAH-CET.
• Fill in the application form

The minimum JEE Mains percentile is not yet disclosed by the institute, candidates who have scored 50% are eligible to appear for the entrance exam. The institute will reveal the marks required at the time of admission.

Padmabhooshan Vasantdada Patil Institute of Technology (PVPIT) Pune offers degree courses in UG and PG with multiple specilizations. Students who wants to continue their studies and do Masters degree from PVPIT must fulfill the eligibility criteria and then apply. PVPIT allots a total of 108 seats in M.Tech.

Firstly, Aspirants need to go through the criteria set by the institute, then score a qualifying marks in the entrance exam i.e. GATE, MHTCET M.Tech. After that shortlisted candidates will be called for counselling or interview and then selected candidates will be alloted seat as per the ranking. As many students can apply for M.Tech at PVPIT Pune but those will get selected who qualify the selection process.

Yes, you can get into Padmabhooshan Vasantdada Patil Institute of Technology, Pune for B.Tech with 88% in JEE mains. Those aspirants who are willing to pursue B.Tech from PVPIT Pune must have secured 45% marks from a recognised university approved by All India Councilor should have a Diploma degree in Engineering. Once this criteria is fulfilled the marks scored in the entrance exam i.e. JEE Mains will be taken under consideration for admission. The minimum percentile or the cutoff will be declared by the institute and accordingly the next step of selection process will take place.

Yes, indeed you can take admission in JSPM for B.Tech. 86.8% satisfies the eligibility criteria of admission in JSPM. You scored good percentage and a better rank out of Lacs of students. JSPM accept both JEE MAINS and GATE also give scholarships on the bases of merit. JSPM is one of the top colleges in Bavdhan, Pune. More than 95% students get placed from JPSM. The average package is more than 6 Lacs per annum which means 50000 per month which is not bad in current era. More than 90% students got internship during their last year. Some Top recruiters are Tata, mahindra, Infosys and other companies.

Yes, GATE is required to take admission in ME and M.Tech at JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology. GATE (Graduate Aptitude Test in Engineering) is one of the biggest exam and students are required to qualify it as an eligibility criteria for taking admission in the top engineering colleges.

Some factors which affect JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology cutoff 2023 are:

1. The total number of seats at JSPM - TSSM's Padmabhooshan Vasantdada Patil Institute of Technology are low.
2. As it is a engineering college, program/courses like BE and B.Tech are in higher demand which results in higher cut off.

BITSAT Birla Institute of Technology and Science conducts BITSAT exam for shortlisting students can easily get selected for engineering and pharmacy. For computer Science and engineering the minimum cutoff for BITSAT 2023 is 370-375 which is a great score. More than 375 helps you to take admission in JSPM Computer Science and engineering. If you study well you can easily get more than 375. Taking admission from BITS is more easier than taking admission in IITs. But it is worth to take admission in JSPM you can get top placements.

Due to the ongoing entrance tests, JSPM - TSSM's PVPIT has not yet issued the B.Tech cutoffs for 2024 admissions. Cutoffs usually occur after the test is over. JEE Main or MHT CET results are accepted by PVPIT. There are January and April sessions for JEE Main 2024; the results for April are still awaiting. With tests taking place in late April, MHT CET registration closed on March 1, 2024. Anticipate deadlines following the April MHT CET and JEE Main. For announcements regarding deadlines, stay informed by visiting PVPIT's website.