B.E. in Plastic Technology
at LDCE Ahmedabad, University Area

4.6 /5

(14 Reviews)

Private Institute
Estd. 1948

4.8

Placements

4.3

Infrastructure

4.4

Faculty & Course

4.8

Campus Life

4.8

Value for Money

Vraj

B.E. in Plastic Technology - Batch of 2027

4.4

One of the best college L.D.

Placements: Around 165 students are placed in my Mechanical Course. My college provides excellent placement. In the year 2024-25, 92% of students got placed. The highest package is 19 LPA, the lowest package is 3 LPA, and the average package is 4.5 LPA. Top companies are Reliance, Adani, Atul, L&T, Hitachi, Voltas, etc. My college does not provide any internships. If you want an internship, you must go outside of the college.

Infrastructure: According to the infrastructure, the best facilities are provided by LDCE. The infrastructure of LDCE is very old, and now the departments are under repair. Facilities like Wi-Fi, labs, classrooms, library, sports club, and any other clubs are provided by LDCE. Good quality food is available in the mess. Canteen food is hygienic, according to me.

Faculty: In LDCE, most of the teachers are well qualified. They are also very helpful to students all the time. Their knowledge is excellent. They have the best type of teaching methods. My course curriculum is not industry-ready to me because it is technical. Semester exams are not very difficult.

Reviewed on 31 Aug 2025Read More

Suyani mayur Verified Icon

B.E. in Plastic Technology - Batch of 2024

4.8

A year ago our college student got job in Microsoft with INR 28 lacs package.

Placements: In my course, there is 100% placement. The lowest package is approximately INR 2.5 lacs, average package is INR 3-4.5 lacs and the highest is INR 7.5 lacs. Reliance, Amul, TCS and many other companies are recruiting our student. Students above 6.5 CGPA got internship in Reliance and Amul.

Infrastructure: There is Wi-Fi facility and our department have labs also. Classrooms are clean and our college has a huge library. Many hostel blocks are there in our college and recently new hostel is open which have more facilities than other hostel blocks, Food of our canteen is just awesome, quality of food is very good and there are 3 mess in our college.

Faculty: Our HOD has very deep and practical knowledge about our field and her teaching skill is just mind blowing. Exams are not that difficult and passing marks are 23 out of 70. Our exam is organized by Gujarat technological university which is the largest university of Gujarat .

Other: Few years ago when I passed out from my SSC, my principal told me about my course (plastic engineering. )and the best thing about my course is that in my field competition is very low and job opportunities are very high because many people are not aware about this field. In my college many events are organized by our college students like lakshya. Lakshya is the best event of our college and it is the second largest tech fest in Gujarat. There are a lot of scholarships which are provided by government like digital Gujarat, MYSY and many more which provide financial support to students.

Reviewed on 23 Feb 2023Read More

Pradip Rohit Verified Icon

B.E. in Plastic Technology - Batch of 2023

4.8

It has good infrastructure and provides good facilities.

Placements: About 100% of students are placed at our college. An average salary package is offered to students. Most companies visit our college. An average percentage of students got internships from our course.

Infrastructure: Our college has a good infrastructure and the best campus. All facilities are provided on the campus. Wi-Fi is available in some places. All labs are available in very good condition. Most of the food items are available in the canteen. Medical facilities are available at the college. Sports and games are provided at the college.

Faculty: We have very helpful teachers for teaching and guiding for placements. All courses are very helpful, with highly qualified teachers available. They are very friendly. You can easily pass all the semester exams. The pass percentage is very high every year.

Other: I am interested in this course, so I chose it. I chose this college because it provides the best facilities and the most helpful teachers, who are very good at teaching. Our college has an eco-friendly culture. Most of the courses are available here.

Reviewed on 11 Aug 2022Read More

Photos

View more 14 Reviews

B.E. in Plastic Technology

Table of contents

Overview
Fees
Student Reviews
Placements
Entry Requirements
+ 2 more items

B.E. in Plastic Technology
at
LDCE Ahmedabad
Overview

L D College of Engineering offers a 4 years B.E. in Plastic Technology course at the UG level. A total of 30 students can enrol in this course. The total tuition fee for the entire duration of this course is INR 8,040. Find out more about other courses under L D College of Engineering B.E. / B.Tech.

Total Tuition Fees	₹8,040 Get Fees details
Duration	4 years
Course Level	UG Degree
Mode of Course	Full Time
Official Website	Go to Website
Seat breakup	30
Type of University	Private

B.E. in Plastic Technology
at
LDCE Ahmedabad
Fees

The total tuition fee for L D College of Engineering B.E. in Plastic Technology is INR 8,040. Besides, the fee also includes other components, such as exam fee, caution deposit, enrollment fee, etc. Some of the fee components, such as caution deposit are one-time payable. Candidates after getting admission in B.E. in Plastic Technology need to pay the L D College of Engineering fee to confirm their seat in the institute. Below is fee breakup for L D College of Engineering B.E. in Plastic Technology:

Fee components	Amount (4 years)
Tuition Fees The fee might include component other than tuition fees.	₹ 8,040
Hostel Fees Meal plan is not included in mentioned fee.	₹ 7,800
One-time Payment One time payment includes enrolment fee.	₹ 150
Total fee	₹ 15,990

These are based on information available on various sources. Latest values may differ.

B.E. in Plastic Technology
at
LDCE Ahmedabad

Frequently Asked Questions

B.E. in Plastic Technology
at
LDCE Ahmedabad
Students Ratings & Reviews

4.6/5

12 Verified Reviews Info Icon

4-5
10
3-4
2

Placements4.8

Infrastructure4.3

Faculty & Course4.4

Campus Life4.8

Value for Money4.8

Rahul Gupta Verified Icon

B.E. in Plastic Technology - Batch of 2020

4.0

4.0Placements3.0Infrastructure3.0Faculty5.0Crowd & Campus Life5.0Value for Money

The college provides great facilities, good placements and 100% placements.

Placements: I passed out of LD from plastic technology. You will get an opportunity to work with many companies and industries. Roles offered are in marketing, production, research, development etc. Amul, Accenture, Lohia, etc., came here, and they are top recruiters.

Infrastructure: This is a government college with very low fees. Labs are good, and you can do many experiments during the course. There is no Wi-Fi available in the college. A good library and very big reading room are available. Hostels are good with very low fees.

Faculty: The teachers are very helpful and well-qualified. The teaching techniques are good, I can say. The course curriculum is good but also needs some improvement. But it is quite good and interesting for students. Semester exams are moderate. If you study regularly and put in good efforts, you will crack it easily.

Other: Many extracurricular activities are conducted here.

Reviewed on 14 Feb 2022Read More

CHIRAG SHAMJIBHAI RATHOD Verified Icon

B.E. in Plastic Technology - Batch of 2022

5.0

5.0Placements5.0Infrastructure5.0Faculty5.0Crowd & Campus Life5.0Value for Money

L D College of Engineering is an awesome college.

Placements: Faculty members take all responsibility for our placements. They teach us how to speak, how to express your self in an interview and how to respond to all questions. About 20-25% of the students from our branch got placement. In my view, AMUL company offered the highest salary package in our branch.

Infrastructure: L D College of Engineering has very good, huge, and clean hostels. Our college provides good labs with all equipment. Our college provides good classrooms with very clean and good facilities. The library is peaceful, with many books. The mess and canteen serve good and healthy food. Our college has a very good name in the sports field.

Faculty: Faculty members in our college are highly knowledgeable and helpful. Their teaching quality is very helpful in our study. Faculty teaches according to the industrial mechanism. Faculty members have various high teaching skills which would make us very knowledgeable and professional also.

Other: The campus life is good.

Reviewed on 14 Aug 2020Read More

B.E. in Plastic Technology
at
LDCE Ahmedabad

Students also asked

Download exam sample paper

B.E. in Plastic Technology
at
LDCE Ahmedabad
Placements

Particulars	Statistics (2023)
Median Salary	INR 5.75 Lakh

Top Recruiters for LDCE Ahmedabad

AMW Automobiles

Cybage

Ford Motors

Hitachi

View placement details

B.E. in Plastic Technology
at
LDCE Ahmedabad
Entry Requirements

General

Requirements for 12th grade Up Arrow Icon

45%
A candidate must have passed 10+2 with mentioned marks from a recognised board.

GUJCET

JEE Main

Other eligibility criteria Up Arrow Icon

B.E. in Plastic Technology
at
LDCE Ahmedabad
Admission Process

Register and Apply
Interested candidates can apply online with required information.
Merit Screening
Admission is based on the rank obtained in JEE Mains.