

M.Tech. in Manufacturing Technology at NIT Agartala Overview
NIT Agartala offers M.Tech. in Manufacturing Technology course for a duration of 2 years. The institution offers this course in Full Time mode at the PG level. With a total tuition fee of INR 2,27,300, this course is offered in the stream of Engineering. Admission is offered to a total of 15 students. Check other details of NIT Agartala M.Tech. in Manufacturing Technology in the below page.
Total Tuition Fees | ₹2.27 Lakh Get Fees details |
Duration | 2 years Get Curriculum |
Course Level | PG Degree |
Mode of Course | Full Time |
Official Website | Go to Website |
Seat breakup | 15 |
Type of University | Public/Government |
M.Tech. in Manufacturing Technology at NIT Agartala Fees
The NIT Agartala - National Institute of Technology M.Tech. in Manufacturing Technology fee is inclusive of components such as Tuition Fees, One-Time Fees, Registration Fees, Exam Fees, and others. Also, candidates may be required to pay extra fees that are specific to the institution. The total tuition fee for the M.Tech. in Manufacturing Technology program at NIT Agartala - National Institute of Technology is INR 2,27,300. More information on the NIT Agartala - National Institute of Technology M.Tech. in Manufacturing Technology fee is as follows:
| Fee components | Amount (2 years) |
|---|---|
The mentioned fees is as per CCMT.
Tuition fees is calculated on the basis of 1st semester. Actual amount may vary. | ₹ 2.27 Lakh |
Meal Plan is included in mentioned fee.
The fees might include components other than hostel fees.
Hostel fees is calculated on the basis of 1st year. Actual amount may vary. | ₹ 68,290 |
₹ 2.96 Lakh |
M.Tech. in Manufacturing Technology at NIT Agartala Frequently Asked Questions
Branch-wise students placed during NIT Agartala MTech placements 2024 is mentioned below:
MTech Branch | Eligible Students 2024 | Students Placed 2024 |
|---|---|---|
Civil | 42 | 6 |
CSE | 14 | 11 |
Electrical | 13 | 9 |
Mechanical | 2 | 2 |
ECE | 13 | 7 |
According to the Annual report 2024 released, branch-wise students placed during NIT Agartala MTech placements 2024 is mentioned below:
MTech Branch | Eligible Students 2024 | Students Placed 2024 |
|---|---|---|
Civil | 42 | 6 |
CSE | 14 | 11 |
Electrical | 13 | 9 |
Mechanical | 2 | 2 |
ECE | 13 | 7 |
The NIT Agartala GATE Cutoff 2024 has been released for Round 1. The Cutoff was released for various M.Tech courses for different categories. For the General AI category candidates, the Cutoff scores ranged between 350 and 528. The most competitive course was M.Tech in Artificial Intelligence, with the closing cutoff of 528. Therefore, candidate with a Cutoff of 500 cannot get M.Tech in AI at NIT Agartala.
For the OBC AI category candidates, the Cutoff for M.Tech in AI closed at 443. Therefore candidates falling under the OBC AI category can consider taking M.Tech in AI with the given score.
MTech median package received during NIT Agartala placements 2024 was 7.5 LPA. In 2023, the median package received was 6.25 LPA.
NIT Raipur M.Tech cutoff 2024 has been released across multiple specialisations. Based on the Round 1 seat allotment, the M.Tech cutoff scores ranged between 352 and 512 for the General AII India category students. Among all the M.Tech specialisations, M.Tech. in Information Technology is the most competitive specialisation. So, considering the round 1 cutoff, candidates seeking admission to National Institute of Technology Raipur must secure over and above the cutoff range mentioned here to be eligible.
A detailed course-wise NIT Raipur GATE CCMT cutoff 2024 is given below for the General category students under the AII India Quota.
M.Tech. in Manufacturing Technology at NIT Agartala Curriculum
The duration of M.Tech. in Manufacturing Technology offered at NIT Agartala is 2 years. The course contains elective and core subjects related to M.Tech. in Manufacturing Technology. Candidates can check out the below-mentioned PDFs to know more about NIT Agartala M.Tech. in Manufacturing Technology curriculum:
M.Tech. in Manufacturing Technology at NIT Agartala Students also asked
A correct approach accompanied by a well-built preparation strategy is everything a student needs to ace JEE Main 2023. A last-minute preparation tips for the exam is mentioned below:
Choose your reference books wisely
Revise as much as possible
Cross-check section-wise weightage & syllabus for all subjects covered in JEE Main
Solve as many Mock Tests as possible. Shiksha.com is providing FREE Downloadble JEE Main Mock Test Paper (with Solutions).
Solve previous year’s JEE question papers there are high chances of getting questions from there
Keep your focus on NCERT books at this point
NIT Agartala approval details are not yet released. NIT Agartala has 13 departments under it. Agartala NIT offers UG, PG, & PhD programmes to students. These courses are given across the Management, Engineering, and various other streams. Tripura Engineering College was converted to the NIT Agartala by the Government of India.
A total of 11 students were placed out of 14 eligible students during NIT Agartala MTech placements 2024. MTech placement rate in 2024 was 78.57%.
To get admission in National Institute of Agartala, students must meet the selection requirement set by the college. The selection for NIT courses is entrance-based. Check the table below to know NIT Agartala selection criteria:
| Courses | Selection Criteria |
|---|---|
| BE/ BTech | JEE Main + JoSAA counselling |
| MBA/PGDM | MAT, GMAT, CAT, CMAT + GD & PI |
| ME/ MTech | GATE + CCMT counselling |
| MCA | NIMCET |
NIT Agartala faculty members are highly qualified. NIT Agartala has skilled and dedicated faculty members. The faculty are PhD, diploma, and degree holders. Some of the faculty members are as follows:
| Faculty Name | Faculty Qualification |
|---|---|
| Dr. Manas Rakshit | - BTech, University of Kalyani, West Bengal - MTech, NIT Rourkela - PhD, NIT Rourkela |
| Dr. Shikha Maurya | - BTech, AKTU - MTech, IIITM Gwalior - PhD, IIITDM Jabalpur |
| Dr. Apangshu Das | - BTech, Rashtrasant Tukadoji Maharaj Nagpur University - MTech, NIT Agartala - PhD, NIT Agartala |
Download exam sample paper
M.Tech. in Manufacturing Technology at NIT Agartala Placements
| Particulars | Statistics (2023) |
|---|---|
| Median Salary | INR 7.50 Lakh |
M.Tech. in Manufacturing Technology at NIT Agartala Entry Requirements
M.Tech. in Manufacturing Technology at NIT Agartala Admission Process
Important Dates
M.Tech. in Manufacturing Technology at NIT Agartala Cutoffs
GATE round-wise cutoff Rank: (General-All India)
| Round | 2020 | 2021 |
|---|---|---|
| 1 | 482 | 371 |
| 2 | 449 | - |
| 3 | 444 | - |
| 4 | 380 | - |
GATE round-wise cutoff Rank: (OBC-All India)
| Round | 2020 | 2021 |
|---|---|---|
| 1 | 432 | 314 |
| 2 | 373 | - |
| 3 | 348 | - |
| 4 | 325 | - |
Explore Courses offered by NIT Agartala
Other courses offered by NIT Agartala
Get best suited colleges for you in real-time
Tell us about your city, course, budget & more
Discover best colleges that meet all your needs
Compare Courses From Similar Colleges
Similar courses in the same city
M.Tech. in Data Engineering
Offered by National Institute of Electronics & Information Technology, AgartalaStudent Forum
Content authored by:
M.Tech. in Manufacturing Technology at NIT Agartala News & Updates



M.Tech. in Manufacturing Technology at NIT Agartala Contact Information
NIT Agartala, Jirania , West Tripura
Agartala ( Tripura)
(For general query)
(For admission query)
(For general query)
(For admission query)
Useful Links
Know more about NIT Agartala
- All About NIT Agartala
- Courses 2026
- Fees 2026
- Reviews on Placements, Faculty & Facilities
- Admission 2026 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Cut off & Merit List 2026
- NIT Agartala Rankings
- Gallery 2026
- Infrastructure Details & Reviews
- NIT Agartala Faculty
- Compare NIT Agartala
- NIT Agartala Q&A
- Scholarships
- JEE Main
- NIT Agartala News & Articles
Know more about Programs
- Engineering
- M.E./M.Tech
- Food Technology
- Instrumentation Technology
- BTech Chemical Engineering
- AI & ML Courses
- Aeronautical Engineering
- BTech Petroleum Engineering
- Petroleum Engineering
- VLSI Design
- MTech in Computer Science Engineering
- Metallurgical Engineering
- BTech Robotics Engineering
- BTech in Biotechnology Engineering
- Aerospace Engineering

