B.Tech Electrical Engineering Colleges in India

Yes, Alliance University does offers BTech in mutiple sepcialisations. The BTech is a four-year course divided into eight semesters. The UG-level course is offered in seven specialisations via the Alliance College of Engineering & Design. Some of the BTech specialisations are Computer Science & Engineering, Aerospace Engineering, Mechanical Engineering, Information Technology, Information Technology (Data Analytics), etc. Additionally, the university also provides lateral entry to the BTech courses. Alliance University BTech admission 2024 is open now.

Candidates seeking admission to the BTech programme at Acharya Nagarjuna University must fulfil the following requirements:

• The candidate should have passed class 12 in Physics, Chemistry & Maths with a minimum of 45% aggregate (40% for reserved categories).
• Candidates based on a valid rank in the Acharya Nagarjuna University Engineering Entrance Test (ANUEET) will be selected further for the counselling process.
• Students according to their scores in AP EAMCET or JEE Main will get their BTech branch during the counselling round followed by document verification and fee payment leading to final seat allotment.

The fees range for courses offerred by the Velammal Engineering College is around INR 35000 - INR 200000.

The fees range for courses offerred by the BBIT - Budge Budge Institute of Technology is around INR 54000 - INR 381700.

Dr. D. Y. Patil Institute of Technology, Pimpri, Pune, is a co-educational engineering college situated in Pimpri-Chinchwad, Pune.

This esteemed institution offers a comprehensive range of 22 courses.

Presently, there are 720 students enrolled in the B.E program, while the M.E programme has 112 students.

Further, as per the United University students' reviews on the Shiksha page,  the average package offered during the 2023 placement drive stood at INR 4.60 LPA. The top recruiters of United University in 2023 included Flipkart, Tata Group, Infosys, Deloitte, Intellipaat, Arcus, HCL, TCS, ICICI Bank, etc.

The flagship courses offered at PVG's College of Engineering and Technology and G.K. Pate (Wani) Institute of Management are B.Tech, M.E./M.Tech, MBA/PGDM. The Institute has experienced faculty offering the best education to students. On the basis of Shiksha verified reviews, PVG's College of Engineering and Technology and G.K. Pate (Wani) Institute of Management has a rating of 3.6 by students. The college's campuslife, placements, faculty and Infrastructure has been rated as 3.7, 3.6, 3.8 and 3.2 as per reviews by students.

The BTech Mechanical Engineering syllabus is not the same across all colleges, as every college committee sets a particular coursework pattern at the start of every academic year to be followed for the respective batch. The syllabus includes some core subjects, interesting electives, and lab work that gives detailed knowledge to the students about the workings of the field. 

The fees range for courses offerred by the Annasaheb Dange College of Engineering and Technology is around INR 180000 - INR 372556.

D.K.T.E. Society's Textile and Engineering Institute is a well-known institution for MBA/PGDM, B.E. / B.Tech, After 10th Diploma, M.E./M.Tech courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, D.K.T.E. Society's Textile and Engineering Institute has a rating of 4.21 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 4.16 on Campus Life, 4.19 on Placements, 4.43 on Faculty and 4.11 on Infrastructure.

Yes, JCT College of Engineering & Technology offers scholarships. This scholarship helps students continue their engineering careers. Students will be granted the scholarship based on students’ merits, previous standard scores and their families’ annual income.

Yes, Indian national candidates must pass HSC or its equivalent examination with Physics and Mathematics as compulsory subjects along with one of the Chemistry or Biotechnology or Biology or Technical Vocational subject or Computer Science or Information Technology or Informatics Practices or Agriculture or Engineering Graphics or Business Studies with at least 45% aggregate (40% aggregate, in case of Backward class categories and Persons with Disability candidates belonging to Maharashtra State only) in the above subjects taken together to apply for BTech course. The preference shall be given to the candidate obtaining non-zero positive score in JEE Mains Paper-I over the candidates who obtained a non-zero score in MGMU-CET/ MHT CET/ PERA CET. Aspirants who have passed Diploma in Engineering and Technology with at least 45% aggregate 40% aggregate, in case of Backward Class categories and Persons with Disability candidates belonging to Maharashtra State only) can also apply for the BTech course. 

Direct admission is valid for M.Tech programme at RIET Kerala. However, for BTech programme, the college accepts admission in two ways. The partial admissions are conducted as per the CEE norms and the remaining admissions are done through Management quota.

Navrachana University offer BTech in the full-time mode. The duration of the UG degree programme is four years. It is offered through the university's School of Engineering & Technology. The university offers four core Engineering streams/ specialisations. These specialisations are listed below:

• Computer Science & Engineering
• Mechanical Engineering
• Civil Engineering
• Electrical & Electronics Engineering

Yes, Amrutvahini College of Engineering offers decent placements to its BTech courses annually. Check out the key highlights of Amrutvahini College of Engineering placements for the overall Class of 2024 and 2025 in the table below:

Particulars	Placement Statistics (2024)	Placement Statistics (2025)
the highest package	INR 8.5 LPA	INR 8.8 LPA
Total placements	715	486

The course fees for four years BTech course at Kalinga University is around INR 4 lakh. The course fee might include multiple fee components. Candidates must pay the course to finalise the admission. Further, selected candidates will have to deposit the fee within ten working days after the declaration of the qualified candidate's list. Students can pay the fee by any mode (Online/ Cheque/Draft). 

NOTE: This information is sourced from the official website/ sanctioning body and is subject to change.

The average BTech CSE salary for graduates in India can range between INR 4 LPA and INR 12 LPA. The scope of the BTech CSE programme in India is excellent and hence the starting salary packages offered by recruiters are also high as compared to some other engineering courses.

The salary depends on factors like the years of experience you hold, your academic qualification, skill set, etc. Once you enter the industry and get some years of experience in hand, you will get a higher salary package. But, in the starting of your career journey, you can expect between INR 4 LPA and INR 6 LPA.

Candidates have to register online at the respective RTU web portals, by mode of Net banking/ ATM card/ Debit Card/ Credit Card, etc. After successful submission of application forms, candidates will be redirected to the college choice form for entering the required choices of institutes and branches. Candidates can Save or Lock their choices. Once Locked, no further modifications can be made to the choices. In the case of management quota seats, candidates have to send a demand draft of INR 250 payable in favor of Convenor REAP to the respective institute where candidates seek admission.

The step-wise RTU application process is mentioned below:

Step 1: Visit the respective online web portals

Step 2: Deposition of Application cum registration form fee

Step 3: Fill out the online Application cum registration form, and college choice form, and upload the required documents.

Step 4: Candidates will receive confirmation E-mail/ message at registered E-mail ID/ mobile no. after successful submission of Application cum registration form and college choice form

Step 5: Take a printout of the form and keep it for future references

LDRP Institute of Technology and Research has courses such as B.Tech, M.E./M.Tech, MBA/PGDM, MCA to offer. These courses are in the stream of Engineering, Business & Management Studies, IT & Software. LDRP Institute of Technology and Research has specializations such as B.Tech specializations in Computer Science Engineering, Electrical Engineering, Mechanical Engineering, Civil Engineering, Automobile Engineering, Electronics & Communication Engineering, Information Technology, M.E./M.Tech specializations in Civil Engineering, Power Engineering, Production Engineering, Mechanical Engineering, Computer Science Engineering, Automobile Engineering.

As per the data available, Median package of B.E. / B.Tech course is around INR 320,000.

NSS College of Engineering KEAM Cutoff 2024 has been released for different categories under the HS Quota, during Round 1 Cutoff. The Cutoff ranks was released for different BTech specialisations. For the General HS category candidates, the Round 1 cutoff rank ranged between 2504 and 12140. The most competitive course for the General HS category candidates was BTech in Computer Science and Engineering. For the OBC HS category candidates, the cutoff ranks ranged between 3121 and 18048. The most competitive course for the OBC HS category candidates was BTech in Computer Science and Engineering.

The percentage of students placed during Gandhinagar University placements 2023 was 95%. Earlier, the placement percentage recorded in 2022 and 2021 was 82% and 78%, respectively.