B.Tech Mechatronics Engineering Colleges in India

There is enough room for innovation and creativity in the BTech Mechatronics engineering course, where you can put to use your dedication, passion, and creativity, coupled with electrical, mechanical, and electrical domain knowledge, to innovate smart robots and electronic systems. In this digitalized world when everything is going automatic and governed by robotic systems, a BTech degree in Mechatronics Engineering can do wonders if put to use the right way.

Know more about -

Mechatronics Engineering Courses

You can learn so many skills from the BTech in Mechatronics Engineering course, both through classroom lectures and practical exposure via lab classes and project work. You can check some important skills learned during the course duration given here:
Proficiency in Computer Programming
Knowledge of Control Systems
Robot Design
Automation Techniques
CAD/CAM Software
Electronics & Instrumentation

You must research well on your part about the college coursework structure. See the course fees, teaching faculty expertise, hands-on training opportunities, placements,  and alumni feedback, which serve as a testimony for the reputation and ranking of the college.
Only after proper research and analysis should you take the final call for admission at the college, as the 4-year academic ride would be a stepping stone to a fulfilling career journey ahead. Make sure you make it count. Best wishes!

Know more about -

Mechatronics Engineering Courses

Well, yes. You will have to pay an additional application fee for the BTech Mechatronics Engineering course which may vary based on the college where you're planning to pursue the course but the general admission registration fee is around INR 500 to INR 3,000.

Know more about -

Mechatronics Engineering Courses

SRM IST Kattankulathur BTech fees has multiple components, like tuition fee, security deposit, & more. The UG level programme are available with the tuition fees of INR 11 lakh to INR 23.8 lakh. The mentioned fee amount is as per the official website/sanctioning body. It is however still subject to changes and hence, is indicative. 

You can check the basic list of documents for BTech Mechatronics Engineering in the table given below:

• Class 12 Mark sheet with at least 50 to 60% marks in PCM
• Provisional Mark sheet (if the original isn't issued yet)
• Class 10 Mark Sheet
• Entrance Exam Scorecard and Admit Card Copy (if applicable)
• A Valid ID Proof (Aadhar card. PAN, Passport)
• Character and Migration Certificates (may be asked)
• Recent Passport-Size Photos

There are more than 180 BTech Mechatronics Engineering colleges in India, out of which around 65 colleges accept students on the basis of JEE Main exam scores for admission. You need to work really hard to get an excellent score and rank in the exam to get a seat at top colleges. A few colleges that accept the JEE Main exam scores include Thapar University, LPU, SASTRA University, NIT Patna, and Manipal University (Jaipur).

Know more about -

Mechatronics Engineering Courses

The total fee for BTech range from INR 4.5 lakh -INR 36 lakh. The fee is calculated based on the semester fee.  Admission to BTech course is based on LPUNEST or CUET UG score. After completion of the selection rounds, shortlisted aspirants need to pay the course fee to confirm their admission. Candidates are first required to register with an application fee for LPUNEST. The exam fee for LPUNEST is INR 1,000 for males and INR 500 for females.

The fees for IIT Patna CSE BTech is INR 80,000.

The table given below depicts the course-wise total strength and the number of students placed over the past three years of SASTRA University placements:

NOTE: The above details are fetched from the NIRF report 2024.

Mechanical Engineering and Aerospace Engineering are two different fields of study at the Manipal Institute of Technology. Aerospace Engineering covers aeronautical and astronautical aspects, while Mechanical Engineering is one of the oldest branches of Engineering that deals with machines and devices. MIT is a good college when it comes to placements for Mechanical Engineering students. Approximately 70-80% of students normally get placed with an average salary package. On the other hand, when it comes to Aerospace Engineering, only 50-60% of the students got placed. The fee structure for BTech in both the sub-streams remains the same I. e. , INR 3.35 Lacs for the first year and INR 4.57 Lacs for the remaining years. The Aerospace Engineering programme is a 4-year undergraduate course that requires a minimum eligibility of Class 12 examination with Science subjects such as Biology Maths and Chemistry.

 The department of Aeronautical and Automobile Engineering at MIT was established in 2008 and offers two undergraduate programs and four postgraduate programs. The department has state-of-the-art infrastructure including an autoclave, flight simulator, low subsonic wind tunnel, advanced composites lab, computation lab, gas turbine testing rig, avionics lab, and Trinidad TB 20 aircraft.

In contrast, the Mechanical Engineering programme at MIT is also a 4-year undergraduate course that requires minimum eligibility of Class 12 examination with Science subjects such as Biology Maths and Chemistry. The testimonials of alumni suggest that the recruiting companies are good for Mechanical Engineering graduates like TCS, Wipro, Accenture, Infosys, Ashok Leyland, Cummins, Vedanta, and John Deere among others. It is difficult to compare both the sub-streams because the focus and the curriculum for both of them vary. Therefore, students can select any of the sub-streams depending on their interests and aptitude.

Yes, JEE Mains is a compulsory entrance exam to secure admissions at NIT Patna. Candidates will be alloted seats to the BTech course during the JoSAA counseling on the basis of JEE Mains scores secured for that academic year at NIT Patna.

No other entrance exam scores are accepted for NIT Patna BTech admissions.

The BTech programme of Manipal University Jaipur is available by taking Manipal Entrance Test (MET). The four-year undergraduate course gives 18 specialisation under the Faculty of Engineering. In order to gain admission, the candidates should fulfill the eligibility criteria, which are successful completion of Class 12 or equivalent with an overall aggregate of 60 marks.

No, the BTech admissions at Sathyabama Institute of Science and Technology are entrance based. All candidates who wish to apply for BTech courses offered by the institute must appear for the SAEEE.

The SAEEE is conducted by Sathyabama University every year between the months of November and June for Engineering course admissions.

Banasthali Vidyapith BTech course is a good choice due to offering eight different specialisation of BTech for students to choose. The low seat limit also allows each student get better quality education and more opportunities to take on responsibilities. The cost of BTech courses for Banasthali Vidyapith is aroud INR 6.16 lakh. Candidates can use the aforementioned information to compare Banasthali Vidyapith with other similar institutes offering BTech courses.

The application fee for the JEE main exam varies based on the candidate's category. While filling the application form candidates will be required to select their category before paying the registration fee. Candidates can check JEE main exam 2024 registration fee from the table given below -

No, candidates who want to take admission into Jain University BTech admissions cannot take direct admission into the course. To apply for BTech, candidates need to appear in the common Jain Entrance Test or JET for short. If the candidate is selected, they will be alloted a seat during the counselling rounds.

Yes, Vel Tech offers a three-year BTech Lateral Entry course. Admission to this course is merit-based. Students who are willing to get admission to this course are required to pass Diploma in Engineering/ Technology from the State Board of Technical Education, Tamil Nadu or its equivalent as the minimum eligibility criteria. The university offers this course around the same specialisations as of BTech.

To get BTech admission at Chitkara University, the candidate need to meet the minimum educational qualification as per course requirement. The candidate should pass Class 12 with 60% aggregate or secure 60% in Physics, Chemistry, Mathematics. The selection criteria for the course is JEE Mains score. Overall, BTech is a four-year programme at Chitkara University.

Chennai Institute of Technology admission to BTech is completely TNEA counselling based and is conducted by DOTE Chennai. Check out the below table for details on CIT admission process:

Well, both BTech in CSE and BE in AI and DS both are good courses and both has its own value. If you are good in programming, you can opt BTech in CSE. If you are enthusiastic about AI and DS you can go for it where it is in great demand as far now .

However, TNEA scoring is compulsory for the admission of both the courses.

The total fee of BTech ranges between INR 4.50 lakh-INR 6.39 lakh.

Hindustan University offers a four-year BTech course. Apart from this students can also get direct admission to the second year of BTech through Lateral Entry. The university offers two additional subject options in collaboration with IBM. At Hindustan University, the curriculum of the course is designed in such as way that it helps students to get both theoretical and practical learning, which get possible with the help if Funded Research Projects and many industrial collaborations. The placement cell of the university is also very active. In 2024, NIRF has ranked the university #113 in the "engineering" category.