B.Tech Electrical Engineering Colleges in India

The following is a list of a few top companies who were a part of the recent placement drive at KITS College Guntur:

KITS College Top Recruiters
Riotech Software	Deloitte	Flipkart
Wallmart	BNY Mellon	DeltaX
Amazon	TCS	Hexaware
HCL Tech	Pilog	Cisco

IT & ITES was the top recruiting sector during AVIT placements. The following table illustrates the sector-wise distribution of 2022 placements:

Sector	Placement Percentage (2022)
IT & ITES	52%
Core	29%
Banking & Other	12%
Healthcare & Pharmaceuticals	5%

As per the latest report, 133 companies recruited at Canara Engineering College and presented 440 placements to the batch 2023. The top recruiters of Canara Engineering College in 2023 included Trilogy Innovations, Cerium Systems, Infosys, Mu Sigma, SAP Labs, Hexaware, Nagarro, Tech Mahindra, etc.

Mining Engineering, Civil Engineering, Mechanical Engineering, and Electrical Engineering are the four specialisations offered under the BTech course at Sai Nath University. The UG-level course is spread across eight semesters lasting for four years. The programme is offered as a full-time course. Admission to the BTech courses is subject to valid scores in the last qualifying exam. Sai Nath University BTech admission doesn't require any entrance exam. 

The final admission is based on valid eligibility criteria and qualifying for the merit lists. Therefore, before applying candidates must make sure to qualify for the BTech eligibility criteria as follows:

BTech Course	Eligibility Criteria	Selection Criteria
BTech	Class 12 with 45% aggregate in Physics,  Chemistry, and Mathematics	Merit-based
BTech (Lateral Entry)	BSc or Diploma Engineering	Merit-based

I.K Gujral Punjab Technical University (PTU) accepts JEE Main Ranks for admission to the BE/ BTech courses. Candidates seeking admission can refer to the table given below to check out the JEE Main previous years’ cutoffs for Home State:JEE Main Cut-offs2023

JEE Main Last Round Closing Rank (General-Home State)2023

B.Tech. in Civil Engineering 1552

B.Tech. in Computer Science and Engineering 1682

B.Tech. in Electrical Engineering 1709

B.Tech. in Electronics and Communication Engineering 1567

B.Tech. in Mechanical Engineering 1655

B.Tech. in Software Engineering 1549 

Students who wants to take admission can compare their ranks to previous year ranks. 

Median salary of B.E. / B.Tech course is INR 215,000 as per the reports/data available.

Sir C R Reddy College of Engineering is a well-known institution for MCA, B.E. / B.Tech, M.E./M.Tech, MBA/PGDM courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, Sir C R Reddy College of Engineering has a rating of 3.9 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 3.96 on Campus Life, 3.52 on Placements, 4 on Faculty and 4.03 on Infrastructure.

Yes, candidates who have scored over 60% marks in their Class 12 board exams are eligible to apply for scholarships at Mahatma Jyoti Rao Phoole University. The scholarships at Mahatma Jyoti Rao Phoole University waive a percentage of the total tuition fee payable by a candidate. For candidates who secure a Class 12 aggregate of 85% are entitled to receive a tuition fee waiver of 10% at Mahatma Jyoti Rao Phoole University.

Yes, is it easy to get admission in Monark University. The university accepts admission based on merit. Aspiring candidates must qualify for the eligibility criteria set by the institute for the desired course. Monark University course admission begins with the online application. Interested candidates can apply directly through the official website.

According to Shiksha verified reviews, for the faculty Nawab Shah Alam Khan College of Engineering and Technology (NSAKCET) have rating of 3.3. It represents that Institute has good, qualified and experienced faculty members.

Some of the initiatives and activities organised by the Noorul Islam Centre for Higher Education placement cell are mentioned below:

• Training Programmes: To improve students' soft skills, technical skills, aptitude, and communication talents.
• Industry Interaction: To give students insight into market trends, expectations, and skill requirements, regular meetings with industry professionals are arranged
• Opportunities for Internships: Encouraging students to participate in internships is a major area of concentration.
• Placement Drives: Renowned businesses from a range of industries visit the campus to undertake recruitment processes.
• Career Guidance: To help students make educated career decisions and get ready for the hiring process.

Admission to Government College of Engineering and Textile technology can be possible under a rank between 5939 and 20333 while considering the last-round seat allotment cutoff rank. As per the JMI cutoff 2024, the most desirable course among candidates was BTech in Textile Technology for the General AI category candidates. Check out below the courses available under the given cutoff range for the general quota:

Course	2024
B.Tech. in Textile Technology	20333
B.Tech. in Computer Science and Engineering	5939
B.Tech. in Electrical Engineering	10021
B.Tech. in Mechanical Engineering	14259

Government Engineering College, Bilaspur is a well-known institution for B.Tech, M.E./M.Tech courses. These programs are delivered by highly experienced faculty. As per Shiksha verified reviews, Government Engineering College, Bilaspur has a rating of 3.3 on the basis of reviews by students. Not just this, it has also been rated 3.2 on campuslife, 2.6 on placements, 3.6 on faculty and 3 on Infrastructure.

In Gujarat, Marwadi University is regarded as one of the best engineering schools. It provides an engaging, multidisciplinary, and practical education. It received the highest possible score of A+ from the NAAC committee, out of all of Gujarat. RKU has an effective infrastructure that meets modern and traditional needs. It has an above 80% placement rate each year with an overall placement rate around 90% in 2023. It can be a good college for computer engineering or IT engineering.

Engineering College, Ajmer is a well-known institution for M.E./M.Tech, MCA, MBA/PGDM, B.E. / B.Tech courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, Engineering College, Ajmer has a rating of 3.55 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 3.53 on Campus Life, 3.43 on Placements, 3.8 on Faculty and 3.34 on Infrastructure.

Sree Sastha Institute of Engineering and Technology is a well-known institution for B.E. / B.Tech, M.E./M.Tech, MBA/PGDM courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, Sree Sastha Institute of Engineering and Technology has a rating of 2.93 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 3.19 on Campus Life, 2.61 on Placements, 3.29 on Faculty and 2.89 on Infrastructure.

The average BTech CSE salary for graduates in India can range between INR 4 LPA and INR 12 LPA. The scope of the BTech CSE programme in India is excellent and hence the starting salary packages offered by recruiters are also high as compared to some other engineering courses.

The salary depends on factors like the years of experience you hold, your academic qualification, skill set, etc. Once you enter the industry and get some years of experience in hand, you will get a higher salary package. But, in the starting of your career journey, you can expect between INR 4 LPA and INR 6 LPA.

Swami Devi Dyal Group of Professional Institutions are approved by AICTE (All India Council for Technical Education), the Dental Council of India, New Delhi, and Ministry of Health, Government of India, National Council of Teacher Education, Bar Council of India, Indian Nursing Council, and the Director of Technical Education.

The fee bracket for programs offerred by the GRD Institute of Management and Technology is approximately INR 37000 - INR 328000.

St. Peter's College of Engineering and Technology is a renowned institution offering B.E. / B.Tech, M.E./M.Tech, B.Arch, MBA/PGDM. Students can choose these courses to embark on their careers in the field of Engineering, Architecture & Planning, Business & Management Studies. The institute is staffed with highly skilled and experienced faculty members dedicated to delivering these programs. St. Peter's College of Engineering and Technology boasts an impressive review rating of 3.7 based on student feedback at Shiksha. Additionally, it has received a rating of 3.68 for Campus Life, 3.49 for Placements, 3.86 for Faculty, and 3.7 for Infrastructure.

Ch. Ranbir Singh State Institute of Engineering and Technology accepts JEE Main scores, followed by HSTES counselling. The institute has released the cutoff list for the second round, in which the range of ranks among the General HS category candidates fell between 253043 and 887771. For the OBC HS category candidates, the range of cutoff was between 414691 and 1290747. 

 Among the candidates belonging to the General AI category, the cutoff ranks ranged between 410511 and 1386929. The most competitive specialisation among the General AI category candidates was BTech in CSE. 

Bhubaneswar Engineering College is a reputed institute for B.Tech, MBA/PGDM, M.E./M.Tech, UG Diploma, After 1th Diploma. Students can opt these programs to pursue their career in Engineering, Aviation, Business & Management Studies. Institute has trained & experienced faculty who deliver these programs. Bhubaneswar Engineering College has a review rating of 3.4 on the basis of reviews by students. In addition to this, it has been rated 3.3 on campuslife, 2.9 on placements, 3.6 on faculty and 3.4 on Infrastructure.

MATS University accepts students through online mode. BTech candidates must log in to the admission portal on the official website of the university to complete the application process. The following are the steps mentioned in the MATS University BTech application process:

Step 1: Visit the official website of MATS University.

Step 2: Go to the 'Admission' tab and select the 'Apply Online' option.

Step 3: Proceed with the registration process by entering all the required details. The login credentials will be sent to the registered mobile number as well as the email address.

Step 4: Use the credentials to log in and proceed with the further steps for filling out the application form.

Jerusalem College of Engineering charges the same fees across all specialisations of BTech which is INR 50,000 per instalment. However among the Jerusalem College of Engineering BE courses, the BE in Computer Science and Engineering has the highest course fees at INR 55,000 per instalment.

The rest of the BE courses at Jerusalem College of Engineering have a course fees of INR 50,000 per instalment.