B.Tech Industrial Engineering Colleges in India

As per Shiksha verified reviews, Assam Engineering College has an impressive review rating of 3.54 by 88 students.

 BTech is a four-year course divided into eight semesters. BIHER offers BTech course in 16 specialisations, namely Aeronautical, Aerospace, Automobile, Civil, Biomedical, Mechanical, Industrial Biotechnology, Mechatronics Engineering, etc. Candidates who have completed Class 12 or its equivalent with at least 50% aggregate in Physics, Chemistry and Mathematics can apply for the BTech course. Candidates must pass Class 12 or its equivalent with at least 50% aggregate in PCM/ Biology for Bioengineering department. Apart from the regular four-year BTech course, Bharath Institute of Higher Education & Research provides lateral entry. BTech (LE) is also available in various specialisations, namely Civil Engineering, Computer Science Engineering, etc. However, one can also apply for lateral entry after completing the Diploma course. 

Dr Ambedkar Institute of Technology hasn't released any official dates for BBA admission for 2025. However, candidates can refer to the accepted exam dates, including COMEDK Exam Date 2025 or KCET Exam Date 2025. Candidates are required to appear in any one of the entrance exam to be eligible for the BTech course admission. 

The KCET 2025 exam was conducted on April 16 & 17. KEA conducts KCET 2025 exam in offline centre based mode. 

JSS Academy of Technical Education COMEDK Round 2 cutoff for Civil Engineering is 59059 which is very close to this range. This was for general category under All India quota. Unless the candidate belongs to some other category or domicile, one can not afford to score less than this. With this rank, there is a probability of getting admission however since, the cut offs keep changing from round to round, better ranks definitely increases your chances of getting admission in JSS Academy of Technical Education.

UIT RGPV Bhopal accepts JEE Main scores, followed by a counselling process for admission to the BTech courses. As per the UIT RGPV cutoff 2023, the last round closing rank for BTech ranged between 65225 and 309741, among which CSE was the most competitive specialisation. The Round 1 and the Last Round closing rank for BTech in CSE stood at 64215 and 65225, respectively for the General All India category candidates. 

Refer to the table given below to check out the last round closing ranks for all the BTech specialisations offered at UIT RGPV. 

Course	Last Round (Closing Rank)
B.Tech. in Computer Science and Engineering	65225
B.Tech. in Electronics and Communication Engineering	106880
B.Tech. in Automobile Engineering	283137
B.Tech. in Civil Engineering	220497
B.Tech. in Electrical and Electronics Engineering	114391
B.Tech. in Mechanical Engineering	155975
B.Tech. in Information Technology	95369
B.Tech. in Petro Chemical Engineering	309741

Yes, it is worth pursuing BTech at UPES Delhi as the university is recognised as the Scientific and Research Organisation by DISR, the Ministry of Science Technology,  and the Government of India. The university is a member of the AIU, International Association of Universities,  and World Design Organisation. UPES has also been accredited with an A Grade by NAAC and is ranked 42 under the Engineering category by NIRF 2024. 

Velammal Engineering College cutoff 2024 has been released for admisison to the BE/ BTech courses. Admission to BE/ BTech is based on a valid TNEA scores, followed by a counselling process. As per the TNEA Round 1 cutoff 2024, the closing ranks ranged between 17369 and 25764 for the students belonging to the General AI category. The Round 1 TNEA cutoff for BTech in CSE course is 25764. So, considering the Round 1 closing ranks, if a candidates seeking admission to CSE at the Velammal Engineering College in Round 1 must secure a rank up to 25764. This is for students who belong to the General AI category, as the cutoff varies for different courses and categories.  

Candidates can refer to the table below to check out the category-wise TNEA round 1 cutoff 2024 for the Computer Science and Engineering:

Category	TNEA Round 1 Closing Rank 2024
General	25764
OBC	54053

JEE Main Registration 2024 session 2 last date was March 4. NTA released JEE Main 2024 Application form session 2 on February 2. JEE Main Application form 2024 session 2 was available online on the official website jeemain.nta.ac.in. Candidates who have applied for JEE Main 2024 session 1 had not register again. Such candidates only need to fill the paper details (BE/BTech or BArch/BPlan) and pay application fees. JEE Main 2024 registration last date session 2 was March 4.

BIET - Bapuji Institute of Engineering and Technology has been rated 3.7 on placements on the basis of 84 reviews done by students.

Tamilnadu College of Engineering is a well-known institution for B.E. / B.Tech, MCA, MBA/PGDM, M.E./M.Tech courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, Tamilnadu College of Engineering has a rating of 3.42 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 3.41 on Campus Life, 2.71 on Placements, 3.61 on Faculty and 3.51 on Infrastructure.

Malnad College of Engineering, more commonly known as MCE, has become a name to reckon with in the country as well as in Karnataka. Established in 1960, it has built an extremely robust brand of quality engineering education and academic excellence over all these decades. MCE currently offers several undergraduate and postgraduate programs in numerous disciplines in the field of engineering and is a common destination for students from almost all parts of the country. The college is renowned for its highly qualified faculty, well-equipped infrastructure, and satisfactory placement avenues. Many students get positions in elite companies after their completion of the engineering degree. Besides, MCE is an institution affiliated with VTU, bringing more quality and acknowledgement to an engineering education system.

Opening and Closing rank depends on the category and quota of candidates. For COMEDK Round 2 cutoff 2023, the opening rank was 71183 and closing rank was 77070 for the general category candidates under All India quota. Cut off are different when it comes to other categories or female candidates and even domicile of home state. Admission to Computer Science Engineering in PDA College of Engineering is based on the scores obtained in the COMEDK entrance exam. Applicants are advised to confirm what category are they applying while checking for cut offs.

The fees range for courses offerred by the Basaveshwar Engineering College is around INR 116940 - INR 175240.

The flagship courses offered at SSIT - Sri Siddhartha Institute of Technology are B.Tech, MCA, M.E./M.Tech. The Institute has experienced faculty offering the best education to students. On the basis of Shiksha verified reviews, SSIT - Sri Siddhartha Institute of Technology has a rating of 4 by students. The college's campuslife, placements, faculty and Infrastructure has been rated as 4.3, 3.2, 4.1 and 4.4 as per reviews by students.

The flagship courses offered at University B.D.T College of Engineering, Visvesvaraya Technological University are MCA, M.E./M.Tech, MBA/PGDM, B.Tech. The Institute has experienced faculty offering the best education to students. On the basis of Shiksha verified reviews, University B.D.T College of Engineering, Visvesvaraya Technological University has a rating of 3.6 by students. The college's campuslife, placements, faculty and Infrastructure has been rated as 3.8, 3, 4 and 3.1 as per reviews by students.

The average BTech CSE salary for graduates in India can range between INR 4 LPA and INR 12 LPA. The scope of the BTech CSE programme in India is excellent and hence the starting salary packages offered by recruiters are also high as compared to some other engineering courses.

The salary depends on factors like the years of experience you hold, your academic qualification, skill set, etc. Once you enter the industry and get some years of experience in hand, you will get a higher salary package. But, in the starting of your career journey, you can expect between INR 4 LPA and INR 6 LPA.

Lukhdhirji Engineering College is a well-known institution for M.E./M.Tech, UG Diploma, After 1th Diploma, B.Tech courses. These programs are delivered by highly experienced faculty. As per Shiksha verified reviews, Lukhdhirji Engineering College has a rating of 3.8 on the basis of reviews by students. Not just this, it has also been rated 3.9 on campuslife, 2.9 on placements, 4 on faculty and 4 on Infrastructure.

The number of students who can enroll in the B.Tech programme at OPJS University can vary each year based on the university's policies.However, the specific number of students is not provided.To get an accurate answer, it is advisable to visit the official website of OPJS University or contact their admissions office for the most up-to-date information.

The BTech Mechanical Engineering syllabus is not the same across all colleges, as every college committee sets a particular coursework pattern at the start of every academic year to be followed for the respective batch. The syllabus includes some core subjects, interesting electives, and lab work that gives detailed knowledge to the students about the workings of the field. 

Assam Science and Technology University eligibility criteria require students to complete the last qualifying exam. The minimum aggregate also varies depending on the course and specialisation. In addition, students are advised to also go through the selection criteria of the offered course before applying as admissions are mainly entrance-based. Students can check the following points to know about the ASTU eligibility criteria:

• ASTU UG admission requires students to pass Class 12 or equivalent from a recognised board
• ASTU PG admission requires students to complete graduation in a relevant field from a recognised university
• For ASTU PhD admission, students must complete postgraduation in a relevant field along with having the specified experience/ certifications

Maratha Mandal Engineering College - MMEC offers Degree courses including 6 UG and 2 PG courses. These programs are offerred in Full Time mode. Maratha Mandal Engineering College - MMEC has specializations such as B.Tech specializations in Industrial Engineering, Computer Science Engineering, Electronics & Communication Engineering, Mechanical Engineering, Robotics Engineering, M.E./M.Tech specializations in Electronics & Communication Engineering, Information Technology.

To secure admission to the BTech course at Veer Madho Singh Bhandari Uttarakhand Technical University (VMSB UTU), applicants must have passed Class 12 (or equivalent) with a minimum of 45% marks (40% for SC/ST categories) in Physics, Chemistry, and Mathematics, or must be in possession of an equivalent diploma/B.Sc. degree with a minimum stipulated marks. Applicants then have to submit online on the official site, pay the application fee, and go through centralized counselling based on their score in entrance tests like JEE Main. After that, there is the UTU counselling, where there is allotment of seats, confirmation, and reporting at the allotted institute as the last part.

S.S.N. Engineering College has a rating of 3.5 for the Faculty by students. This shows that the institute has qualified, and experienced faculty members.

As per Shiksha verified reviews, Annai Mathammal Sheela Engineering College has an impressive review rating of 2 by 5 students.