M.Tech in Power Engineering colleges in India

The median salary trends witnessed during Vignan's Foundation for Science, Technology and Research placements over the past three years are presented below:

Particulars	Median Package (2022)	Median Package (2023)	Median Package (2024)
BTech	INR 4 LPA	INR 6.82 LPA	INR 6.96 LPA
MTech	INR 5.07 LPA	INR 5.9 LPA	INR 6.2 LPA

JNTUA cutoff 2024 has been released for the Last Round. As per the JNTUA cutoff 2024 released for the BTech courses, the required rank should ranged between . Considering the Last Round cutoff, the required rank needed would be varied from 6855 to 136972 for getting admission at JNTUA.

Further, check out the courses available under this range for the General AI candidates as per the JNTUA Last Round cutoff 2024:

Course	2024
B.Tech. in Civil Engineering	43852
B.Tech. in Electrical and Electronics Engineering	16442.1
B.Tech. in Mechanical Engineering	33700
B.Tech. in Electronics and Communication Engineering	6855
B.Tech. in Chemical Engineering	66065
B.Tech. in Computer Science and Engineering	136972

 

Siddhartha Academy of Higher Education, Deemed to be University has an impressive placement report. The table below provides the placement statistics recorded during Siddhartha Academy of Higher Education, Deemed to be University placements 2025:

Godavari Institute of Engineering and Technology is one of the most authentic institutions for engineering that boasts an appropriate curriculum and robust infrastructure for the campus. This college runs a host of different engineering programs with experienced faculty members emphasizing practically located learning with industry relevance.

Aditya Institute of Technology and Management admissions accepts entrance exams for BTech, MBA and M.Tech courses. The 70% seats are filled through various state-level entrance exams. Check below the list of accepted entrance exams for AITAM UG & PG courses:

Course Name	Accepted Entrance Exams
BTech	EAMCET
BTech (Lateral Entry)	ECET
MBA	ICET
MTech	GATE/ PGECET

As per information available, Sapient College of Commerce and Management has recorded (aprx) INR 350,000 median salary to students for B.E. / B.Tech course during placements.

Rajeev Gandhi Memorial College of Engineering and Technology is a well-known institution for B.E. / B.Tech, M.E./M.Tech, MBA/PGDM, MCA courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, Rajeev Gandhi Memorial College of Engineering and Technology has a rating of 3.79 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 3.85 on Campus Life, 3.54 on Placements, 3.85 on Faculty and 3.98 on Infrastructure.

As per Shiksha verified reviews, QIS College of Engineering & Technology has an impressive review rating of 3.58 by 181 students.

The required minimal score is 55%. A minimum of fifty-five per cent of marks in a B.E./B.Tech (Chemical Engg./Leather Technology/Bio-Tech./Industrial Bio-Tech./Bio-Chemical Engg./Bio-Informatics) or B.Pharm. Or M.Sc.(Ag.)/M.V.Sc./M.Sc. In any discipline of Life Sciences is needed for admission to the M.Tech. Bio-Technology application.

A GATE or PGECET scorecard is needed for admission to KL University's M.Tech application. For others, the university administers a front exam, with admission based on the merit rank of certified candidates.

In addition contact your college seniors for accurate information

The courses offered at Shri Vishnu Engineering College for women are :

• Bachelor of Technology
• Bachelor of Technology (Lateral)
• Master of Technology
• Masters in Business Administration

To get admission to BTech course at RVR and JC, students must pass the Andhra Pradesh EAMCET exam. Candidates willing to secure admission to the BTech course need to acquire a cutoff between 4947 and 78641 under General AI quota. Further, 7000 rank is a decent rank to get admission. Candidates can find out below the course available under this rank:

Course	2024
B.Tech. in Civil Engineering	78641
B.Tech. in Mechanical Engineering	60982
B.Tech. in Electronics and Communication Engineering	11128
B.Tech. in Electrical and Electronics Engineering	44199
B.Tech. in Information Technology	13885
B.Tech. in Chemical Engineering	56998
B.Tech. in Computer Science and Business Systems	12116
B.Tech. in Computer Science & Engineering (IoT)	12440
B.Tech. in Computer Science & Engineering (Data Science)	8751

 

Sagi Rama Krishnam Raju Engineering College has below criteria for taking admissions to it's various courses:

Courses	Eligibility
MCA	Candidate must have passed Bachelor degree of 3/4 years duration with Mathematics as one of the subject at Intermediate or Degree level with above mentioned marks from any recognised University/Institute. 45% marks for BC categories. Candidate who are appearing for the final year degree examination are also be eligible. Degree obtained by Distance Mode Program should have recognition by Joint Committee of UGC, AICTE and DEC/DEB. Candidate who passed all the subjects of the three years of any Degree course in one sitting is not eligible for admission.
B.E. / B.Tech	Candidates who have passed Diploma in Engineering or any other examination recognised as equivalent there to, from a recognised Institute/ University, Andhra Pradesh/ Telangana are also eligible. Candidates who have appeared in Diploma in Engineering and who are awaiting their results can also apply on provisional basis. Candidates should belong to the state of Andhra Pradesh/ Telangana. Candidate should have completed 16 years of age as of 31st December of the year of admission (2023). There is no upper age limit.
M.E./M.Tech	Candidate must have passsed B.E./B.Tech. in relevant stream and obtained at least 50% marks (45% in case of reserved category candidates) from an AICTE/UGC approved institution recognised by the Government of Andhra Pradesh as equivalent thereto. Final year appearing students may also apply on provisional basis.

For VIT Bhimvaram, the Andhra Pradesh EAMCET is the accepting exam for the admission to BTech courses. Considering the VIT Bhimvaram cutoff 2024, the last-round stood between 4057 and 62750 for the General Home State category candidates. Looking at the cutoffs, 7k rank is a decent rank for getting admission to given below courses:

Course	2024
B.Tech. in Electronics and Communication Engineering	9290
B.Tech. in Electrical and Electronics Engineering	23606
B.Tech. in Mechanical Engineering	39715
B.Tech. in Civil Engineering	62750
B.Tech. in Information Technology	12395
B.Tech in Computer Science and Business System	10092
B.Tech. in Computer Science and Engineering (Artificial Intelligence and Data Science)	7940

Students must qualify in EAPCET 2025 to attend the counseling for getting admission under category A.

Students who want to join under category B (management and spot ) may approach directorate of admissions on 9154686203 and 9154686204.

G Pullaiah College of Engineering and Technology is a well-known institution for B.E. / B.Tech, MBA/PGDM, M.E./M.Tech courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, G Pullaiah College of Engineering and Technology has a rating of 3.75 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 3.63 on Campus Life, 3.6 on Placements, 3.95 on Faculty and 3.74 on Infrastructure.

The Aditya University placement recorded in 2024 was comparatively higher than in 2023. The number of students placed increased from over 1,284 in 2023 to 3,024 in 2024. The total number of companies visiting the campus has also increased from 122 in 2023 to 260 in 2024. The following table represents the Aditya Engineering College placement comparison for the past two years:

Particulars	Placement Statistics (2023)	Placement Statistics (2024)
Total students placed	1,284+	3,024+
Companies visited	122	260+

Lakireddy Balireddy College of Engineering is a perfect college for students. Placements: Eight percent of students from my college get placed with good packages. The packages in college are: the highest 12 LPA, the lowest 3 LPA, and the and the average 4 LPA.

Lakireddy Bali Reddy College of Engineering (LBRCE), approved by AICTE and affiliated to JNTUK, Kakinada is an Autonomous Institution since 2010 and has been accredited by NAAC with 'A' Grade (3.20 / 4 in Cycle-2), NBA (ASE, CE, CSE, IT, ECE, EEE, & ME) under Tier-I and ISO 21001:2018, 14001:2015, 50001:2018 Certified.

Annamacharya University offers various courses at UG & PG level. The total fee components including Admission Fee (One time), Tuition Fees, etc. Find below the total fee for 

Course name	Total Fees
BTech	INR 3.6 lakh
MTech	INR 76,000
BSc	INR 75,000 - INR 2.3 lakh
MBA	INR 70,000
MCA	INR 70,000
MSc	INR 60,000

Vasireddy Venkatadri International Technological University can check the table given below for course admission eligibility criteria:

Courses	Eligibility
MTech	Graduation degree

 

The mode of AP College course admissions is online. Admission to various courses is based on entrance exams and merit. The accepted entrance exams are AP EAMCET,  JEE Main, and others. Students applying through JEE Main must first register for the JEE Main exam. Then appear for the JEE Main exam. Then with valid scores, apply on the official website of Guntur Nagarjuna University.

Raghu Engineering College has been accredited with the 'A+' Grade by the NAAC. In addition to this, it is certified by ISO and recognised by the AICTE. It is affiliated with JNTU GV Vizianagaram. The college offers a four-year BTech programme at the UG level and a two-year M.Tech course at the PG level. 

In the last five years at Raghu Engineering College a total of 6,318 offers have been made to the students. More than 128 companies have taken place during the Raghu Engineering College placements. The highest package recorded between 2020-2025 was INR 45.5 LPA which was offered by Amazon. 

Yes, pursuing an ME/MTech degree from LPU is a good choice for students interested in the field of Engineering and Technology. 

Sasi Institute of Technology and Engineering provides programmes including MBA/PGDM, B.E. / B.Tech, After 10th Diploma, M.E./M.Tech in streams such as Business & Management Studies, Engineering, and are excellent for students to build their careers. The institute has specializations in Computer Science Engineering, Electronics & Communication Engineering, Electrical Engineering, Mechanical Engineering, Information Technology, Civil Engineering, Artificial Intelligence & Machine Learning, Communications Engineering, Power Engineering, VLSI Design.

As per information available, Krishna Chaitanya Institute Of Technology And Sciences has recorded (aprx) INR 450,000 median salary to students for B.E. / B.Tech course during placements.