B.Tech Polymer Technology Colleges in India

Usually, the cutoff for DTU stays around 90, even for the reserved categories. Therefore, getting into B.Tech courses at DTU is difficult with a JEE Main percentile score of 90 or below. The cutoff also goes high and low every year, depending on the following factors: Number of aspirants registered, The difficulty level of the exam, Total number of seats available, total number of applications received for a particular program, and the category under which admission is sought. Therefore, it is very difficult to predict the exact cutoff and give an exact answer to this question.

The MHT CET percentile required for admission to the ICT Mumbai would depend entirely on which category you belong to. The ICT Mumbai MHT CET cutoff 2025 was published for the EWS category students belonging to the Home State quota. 

For this category, the overall cutoff varied between  91.65 and 98.69 for various BTech course branches. As per the last round cutoff, the most and least competitive branch was BTech in Food Engineering and Technology and BTech in Fibres and Textile Processing Technology, respectively. 

Candidates can refer to the table below to know the first and last round closing percentiles for the EWS HS category. 

Course	Round 1( Closing Percentiles)	Last Round (Closing Percentiles)
Bachelor of Chemical Engineering	98.27	98.37
B.Tech. in Dyestuff Technology	92.07	93.26
B.Tech. in Fibres and Textile Processing Technology	91.65	91.65
B.Tech. in Food Engineering and Technology	98.69	98.69
B.Tech. in Oils, Oleochemicals and Surfactants Technology	90.31	90.31
B.Tech. in Pharmaceutical Chemistry and Technology	97.83	97.83
B.Tech. in Polymer Engineering and Technology	96.41	97.66
B.Tech. in Surface Coating Technology	93.46	93.46

Yes, Birla Institute of Technology is good for BTech. As per the National Institutional Ranking Framework (NIRF) 2023, BIT Mesra was ranked 53rd position in Engineering. The highest and average package offered during the BIT Mesra placements 2023 as per a consolidated report was INR 51 LPA and INR 11.57 LPA, respectively. Talking about BIT Mesra placements 2022, the highest package offered was INR 58.33 LPA. BIT Mesra's average package stood at INR 13.01 LPA. Moreover, a rise of 96% was also recorded in the number of companies that visited in the 2022 placements drive in comparison with 2021. To read about Career after BTech, Click Here.

On the official webiste of B.S. Abdur Rahman Crescent Institute of Science and Technology, I could not find any information on the cutoff marks required in the JEE Main or Crescent College's entrance test, namely Crescent Institute Engineering Admission Test (CIEAT 2024) for admission. However, as per the eligibility criteria mentioned on the official website of the college, students must have at least 50% scores in their Class 12 in the PCM subject combination to be eligible for this course. 

JSS Noida accepts UPTAC for admission to the BTech courses. The JSS Noida UPTAC Cutoff 2024 has been released for Round 2. The Cutoff was released for different categories under the AI and the HS quota. The Genera AI candidates seeking admission to the BTech courses can check the Round 2 cutoff in the table provided below:

Course	2024
B.Tech. in Electrical and Electronics Engineering	185835
B.Tech. in Electrical Engineering	216097
B.Tech. in Mechanical Engineering	401010
B.Tech. in Computer Science and Engineering	67323
B.Tech. in Information Technology	99826
B.Tech. in Civil Engineering	386887
B.Tech. in Electronics and Communication Engineering	137016
B.Tech. in Computer Science and Engineering (Data Science)	91448
B.Tech. in Computer Science and Engineering (Artificial Intelligence and Machine Learning)	82853

The duration of each BE course at JSS Science and Technology University is four years or eight semesters. The candidates who are applying for lateral entry will have a duration of 3 years for BE courses at JSS Science and Technology University if they are alloted seats. Candidates can check the curriculum for the BE courses on the official website for JSS Science and Technology University.

No, direct admission is not possible at Calcutta University in the BTech course. Students must appear for the WBJEE exam for the same. Thy must also fulfil the eligibility criteria required for admission.

 

The median salary package offered to the students after finishing B.E. / B.Tech from P. Savani University is INR 600,000. While, the Median package offered by L D College of Engineering after completion of B.E. / B.Tech is INR 575,000. Basis these stats, P. Savani University is better option compared to L D College of Engineering on the Median salary parameter.

Yes, 250 is a great score. Candidates securing 250 in CUSAT CAT can get into any of the BTech specialisation. As per the previous year CUSAT CAT cutoffs, aspirants with a rank below 300 have a great chance of getting into some of the top BTech specialisations like Computer Science and Engineering, Naval Architecture and Ship Building, Electronics and Communication Engineering, etc.

There is no application link online on the college official website. However, students can apply online through the KEA official website. Moreover, the application form can also be collected from the SJCE campus in person. The application form must be submitted within the prescribed due date. Aspirants are advised to check the required minimum educational qualification before filling out the admission form.

Some popular courses offered by Rashtrasant Tukadoji Maharaj Nagpur University are MSc, PG Diploma, MBA /PGDM, BE /BTech, MA, BDes, BSc, MCA, BPEd, and BHMCT.

Maharashtra Institute of Technology offers around 11 B.Tech courses whereas College of Engineering, Ambajogai offers only two B.Tech courses and many more B.E courses. The placements offered at Maharashtra Institute of Technology seems better compared to College of Engineering, Ambajogai as MIT offers better packages. Around 300 recuiters have visited Maharashtra Institute of Technology for placements.

During 2024 placements, Chemical Engineering emerged as the top branch with 74 students placed. The second in the sequence was the Surface Coating Technology branch. Take a look at the table below depicting the branch-wise number of students placed during Laxminarayan Institute of Technology placements 2024:

Branch	No. of Students Placed (2024)
Chemical Engineering	74
Surface Coating Technology	12
Polymer Technology	9
Petrochemical Technology	6
Oil Technology	6
Pulp Technology	4
Plastics and Polymers Technology	2
Food Technology	2

The NMU Jalgoan BTech fee ranges between INR 1.6 lakh and INR 4.4 lakh. This information is sourced from official website/ sanctioning body and is subject to change. Candidates are required to pay fee after the completion of the selection process to confirm their seat in the university. The duration of the course is for four years. Candidates also need to pay tuition fee semester or annually. Besides, candidates are also required to pay an application fee in the start to register for a course.

Central Institute of Plastics Engineering and Technology is a good institution for M.Sc, PG Diploma, UG Diploma, B.E. / B.Tech, M.E./M.Tech, B.Sc. courses, and these programs are delivered by highly experienced faculty. Major specialisation at Central Institute of Plastics Engineering and Technology are Materials Science, Polymer Technology, Mechanical Engineering.

Central Institute of Plastics Engineering and Technology, Lucknow is a reputed institute for B.Tech, M.E./M.Tech, After 1th Diploma. Students can opt these programs to pursue their career in Engineering. Institute has trained & experienced faculty who deliver these programs. As per Shiksha verified reviews, Central Institute of Plastics Engineering and Technology, Lucknow has a rating of 3.5 on the basis of reviews by students. Not just this, it has also been rated 3.3 on campuslife, 3.4 on placements, 3.9 on faculty and 3.8 on Infrastructure.

The number of students who can enroll in the B.Tech programme at OPJS University can vary each year based on the university's policies.However, the specific number of students is not provided.To get an accurate answer, it is advisable to visit the official website of OPJS University or contact their admissions office for the most up-to-date information.

Well, yes. There are a good number of job openings for BTech Electrical Engineering graduates because of the ever-growing demand for electricity by the growing population. As everything today runs on power, with technological advancements taking place every day and the focus on renewable energy and smart power grids, the need for Electrical Engineering graduates is quite high in the professional world.