M.Tech. in Materials Science and Engineering
- Public/Government Institute
- Estd. 1966
M.Tech. in Materials Science and Engineering at NIAMT Overview
National Institute of Advanced Manufacturing Technology provides PG level courses across various specialisations, one of them is M.Tech. in Materials Science and Engineering. The duration of the programme is 2 years. After pursuing M.Tech. in Materials Science and Engineering course from National Institute of Advanced Manufacturing Technology, candidates are offered lucrative job opportunities in the top industries of the field. There are a total of 18 available for M.Tech. in Materials Science and Engineering. The institution accepts the scores of GATE exam for admission to the course. Check the following section for more details around National Institute of Advanced Manufacturing Technology M.Tech. in Materials Science and Engineering fees, admission and more.
Total Tuition Fees | ₹69,300 Get Fees details |
Duration | 2 years |
Course Level | PG Degree |
Mode of Course | Full Time |
Official Website | Go to Website  |
Seat breakup | 18 |
Type of University | Public/Government |
- Overview
- Fees
- Rankings
- Placements
- Entry Requirements
- + 2 more items
M.Tech. in Materials Science and Engineering at NIAMT Fees
National Institute of Advanced Manufacturing Technology M.Tech. in Materials Science and Engineering fee is inclusive of multiple components, such as Tuition Fees, One-Time Fees, Registration Fees, Exam Fees, etc. Candidates have to pay the course fee to confirm their seat. The total tuition fee for M.Tech. in Materials Science and Engineering at National Institute of Advanced Manufacturing Technology is INR 69,300. Detailed breakup of the National Institute of Advanced Manufacturing Technology M.Tech. in Materials Science and Engineering fee is as follows:
| Fee components | Amount (2 years) |
|---|---|
Fee for GEN(PWD) : INR 34650
Fee for EWS: INR 34650
Fee for EWS(PWD) : INR 34650
Fee for SC : INR 34650
Fee for SC(PWD) : INR 34650
Fee for ST : INR 34650
Fee for ST(PWD): INR 34650
Fee for OBC: INR 3 Fee for GEN(PWD) : INR 34650
Fee for EWS: INR 34650
Fee for EWS(PWD) : INR 34650
Fee for SC : INR 34650
Fee for SC(PWD) : INR 34650
Fee for ST : INR 34650
Fee for ST(PWD): INR 34650
Fee for OBC: INR 34650
Fee for OBC(PWD): INR 34650
Hostel Fee Included
The above mentioned fee is as per CCMT. | ₹ 69,300 |
₹ 69,300 |
These are based on information available on various sources. Latest values may differ.M.Tech. in Materials Science and Engineering at NIAMT Rankings
National Institute of Foundry and Forge Technology has been ranked #151-200 for M.Tech. in Materials Science and Engineering by the NIRF 2024 Ranking. This rank is not specific to M.Tech. in Materials Science and Engineering programme alone but applies to all the M.E./M.Tech courses offered at National Institute of Foundry and Forge Technology. Check out the National Institute of Foundry and Forge Technology M.Tech. in Materials Science and Engineering rankings in the table provided below:
M.Tech. in Materials Science and Engineering at NIAMT Frequently Asked Questions
MTech is one of the most popular courses of National Institute of Advanced Manufacturing Technology. When it comes to the placements, the institute offers decent placements annually. As per the latest report, the the highest and average package offered to M.Tech batch 2023 was INR 4.8 LPA and INR 4.1 LPA, respectively. The key highlights of the National Institute of Advanced Manufacturing Technology placements for the M.Tech Class of 2023 are tabulated below:
Particulars | MTech Placement Statistics (2023) |
|---|---|
the highest package | INR 4.8 LPA |
Average package | INR 4.1 LPA |
The Round 1 seat allotment has been released by NIFF Ranchi, The National Institute of Foundry and Forge Technology cutoff 2025 closing ranks for BTech admission stood between 44591 and 68691 for the General AI category candidates. Among all the specialisations, the CSE being the most favourable one. The cutoff for Mechanical Engineering and B.Tech. in Production and Industrial Engineering specialisations stood at 57853 and 68354, respectively, for the students belonging to the General AI quota. Candidates can refer to the table below to view the last three years final round cutoff data for the General AI quota to understand the cutoff trends:
| Course | 2023 | 2024 | 2025 |
|---|---|---|---|
| B.Tech. in Metallurgy and Material Engineering | 135582 | 160019 | 68691 |
| B.Tech. in Mechanical Engineering | 103803 | 114041 | 57853 |
| B.Tech. in Production and Industrial Engineering | 170137 | 285813 | 68354 |
| B.Tech. in Computer Engineering | 74765 | 91147 | 44591 |
National Institute of Advanced Manufacturing Technology has good record of placements for its BTech, M.Tech and UG Diploma courses. As per the latest report, the the highest package offered to BTech (MME and ME) batch 2024 during the National Institute of Advanced Manufacturing Technology placements in 2024 stood at INR 15 LPA. Further, the domestic the highest and average package offered to BTech (MME and ME) batch 2024 stood at INR 13.95 LPA and INR 7.4 LPA, respectively. The key highlights of the National Institute of Advanced Manufacturing Technology placements for the Class of 2023 are tabulated below:
Particulars | Placement Statistics (2023) |
|---|---|
the highest package | INR 14 LPA (BTech) INR 4.8 LPA (MTech) INR 4.8 LPA (UG Diploma) |
Average package | INR 9.25 LPA (BTech) INR 4.1 LPA (MTech) INR 2.75 LPA (UG Diploma) |
Yes, to get into National Institute of Foundry and Forge Technology, 50000 is satisfactory rank. With this rank, candidates can fetch any course including BTech in Computer Engineering. Moreover, considering the NIFFT cutoff 2025 the General AI category cutoffs for BTech for the same institute stood between 52112 and 79054. Similary, for the OBC AI category candidates, the needed rank ranged between 18159 and 31249. The rank is more than sufficient to get admission with General AI quota, However, not for OBC AI quota, as the rank is bit too low to get you any course under OBC quota.
National Institute of Advanced Manufacturing Technology is a well-known institute of Engineering courses in Ranchi. When it comes to the placements, the institute offers good placements annually for its BTech, M.Tech and UG Diploma courses. As per the latest report, the the highest international package offered to BTech (MME and ME) batch 2024 during the National Institute of Advanced Manufacturing Technology placements in 2024 stood at INR 15 LPA. Further, the domestic the highest and average package offered to BTech (MME and ME) batch 2024 stood at INR 13.95 LPA and INR 7.4 LPA, respectively. The key highlights of the National Institute of Advanced Manufacturing Technology placements for the Class of 2023 are tabulated below:
Particulars | Placement Statistics (2023) |
|---|---|
the highest package | INR 14 LPA (BTech) INR 4.8 LPA (MTech) INR 4.8 LPA (UG Diploma) |
Average package | INR 9.25 LPA (BTech) INR 4.1 LPA (MTech) INR 2.75 LPA (UG Diploma) |
Download exam sample paper
M.Tech. in Materials Science and Engineering at NIAMT Placements
| Particulars | Statistics (2023) |
|---|---|
| Median Salary | INR 4.20 Lakh |
Top Recruiters for NIAMTM.Tech. in Materials Science and Engineering at NIAMT Entry Requirements
- 60%
- Read moreCandidate must have passed Bachelor's degree with the mentoined marks. Candidate should secure 6.5 CGPA (on a 10- point scale) or 60% for GEN-EWS, whereas 6.0 CGPA (on a 10-point scale) or 55% in case of PwD candidates. The mentioned CGPA/Percentage should be awarded by a recognized University/Institute. Candidates passed with B.Sc. degree must have passed Mathematics at Graduation Level. In case, the result of qualifying degree is awaited, provisional admission is permitted.
M.Tech. in Materials Science and Engineering at NIAMT Admission Process
- Register and ApplyInterested candidates can apply online/offline with required information
- Merit ScreeningAdmissions will be made on the basis of merit in graduation
Important Dates
M.Tech. in Materials Science and Engineering at NIAMT Cutoffs
3GATE round-wise cutoff Rank: (General-All India)
| Round | 2020 | 2021 |
|---|---|---|
| 1 | 425 | 352 |
| 2 | 394 | 362 |
| 3 | 374 | 362 |
GATE round-wise cutoff Rank: (OBC-All India)
| Round | 2020 | 2021 |
|---|---|---|
| 1 | 377 | 280 |
| 2 | 335 | - |
| 3 | 286 | - |
Explore Courses offered by NIAMT
Other courses offered by NIAMT
Get best suited colleges for you in real-time
Tell us about your city, course, budget & more
Discover best colleges that meet all your needs
Compare Courses From Similar Colleges
Similar courses in the same city
4.6M.Tech. in Data Science and Artificial Intelligence
Offered by Indian Institute of Information Technology, Ranchi4.0M.Tech. in Computer Science and Engineering
Offered by CIT Ranchi - Cambridge Institute of TechnologyM.Tech. in Materials Science and Engineering at NIAMT Students also asked
Yes, National Institute of Advanced Manufacturing Technology offers placements to its UG Advanced Diploma Courses annually. The key highlights of National Institute of Advanced Manufacturing Technology placements for the Advanced Diploma Class of 2023 are tabulated below:
Particulars | Placement Statistics (2023) |
|---|---|
the highest package | INR 4.8 LPA |
Average package | INR 2.75 LPA |
As per the latest report, the highest package offered to BTech (MME and ME) batch 2024 during National Institute of Advanced Manufacturing Technology placements 2024 stood at INR 7.4 LPA. The course-wise average package offered during NIAMT placements between 2023 and 2024 are tabulated below:
Course | the highest Package (2023) | the highest Package (2024) |
|---|---|---|
BTech | INR 14 LPA | INR 15 LPA (ME and MME, international) INR 13.95 LPA (ME and MME, domestic) |
MTech | INR 4.8 LPA | NA |
UG Diploma | INR 4.8 LPA | NA |
Student Forum
Anything you would want to ask experts?Content authored by:
Colleges in RanchiNational Institute of Advanced Manufacturing TechnologyCoursesM.Tech. in Materials Science and EngineeringM.Tech. in Materials Science and Engineering at NIAMT News & Updates
M.Tech. in Materials Science and Engineering at NIAMT Contact Information
Near Kanchnatoli,
Hatia, Ranchi
Ranchi ( Jharkhand)
(For general query)
(For admission query)
(For general query)
(For admission query)
Useful Links
Know more about NIAMT
- All About NIAMT
- Courses 2026
- Fees 2026
- Reviews on Placements, Faculty & Facilities
- Admission 2026 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Cut off & Merit List 2026
- NIAMT Rankings
- Gallery 2026
- Infrastructure Details & Reviews
- NIAMT Faculty
- Compare NIAMT
- NIAMT Q&A
- NIAMT News & Articles
Know more about Programs
- Engineering
- M.E./M.Tech
- Food Technology
- Instrumentation Technology
- BTech Chemical Engineering
- AI & ML Courses
- Aeronautical Engineering
- BTech Petroleum Engineering
- Petroleum Engineering
- VLSI Design
- MTech in Computer Science Engineering
- Metallurgical Engineering
- BTech Robotics Engineering
- BTech in Biotechnology Engineering
- Aerospace Engineering