Communications Engineering colleges in Maharashtra

For the General AI female category, the last round cutoff ranged from 395 (BTech CSE) to 16204 (BS in Chemistry). Among all the BTech courses, BTech CSE was the most sought-after course for admission, with the cutoff rank of 395. In the case of BS courses, BS in Mathematics was the most competitive course, with the closing rank of 3727. 

Students can check the table below to know the Round 1 and Last Round closing ranks for other courses.

Course	Round 1 Cutoff 2026	Last Round Cutoff 2026
B.Tech. in Aerospace Engineering	6885	6885
B.Tech. in Chemical Engineering	6336	6336
B.Tech. in Civil Engineering	8730	8730
B.Tech. in Computer Science and Engineering	395	395
B.Tech. in Electrical Engineering	1600	1600
B.Tech. in Metallurgical Engineering and Materials Science	8335	8335
B.Tech. in Mechanical Engineering	4903	4903
B.Tech. in Engineering Physics	4090	4541
B.S. in Chemistry	16204	16204
B.S. in Economics	5998	5998
B.S. in Mathematics	3727	3727
B.Tech. + M.Tech. in Electrical Engineering	2693	2693
B.Tech. in Energy Engineering	6945	6945
B.Tech. in Environmental Science and Engineering	9532	9532
B.Tech. in Industrial Engineering and Operations Research	3189	3189
B.S. in Applied Geophysics	14289	14289

Note: Other categories, rounds, etc., will have different cutoffs.

 

VNIT Nagpur has good faculty. All the faculty members are well-educated and hold degrees like PhD. The faculty at VNIT Nagpur is helpful and aim to make the educational experience better for all the students. 

The seats availability for offered courses at Yeshwantrao Chavan College of Engineering, Nagar Yuwak Shikshan Sanstha goes up to 1994. Courses offerred by Yeshwantrao Chavan College of Engineering, Nagar Yuwak Shikshan Sanstha are approved by eminent Government bodies such as AICTE.

Admission to the GH Raisoni College of Engineering, Nagpur may be selective, but mostly all candidates who have good academic record can seek admission to this college. The college mostly admits students based on scores obtained in the Joint Entrance Examination (JEE) Main, the Maharashtra Common Entrance Test (MHT-CET).

The cutoff mark differs year and branch wise, but the students having the score much above the average percentile in such exams are likely to get a seat. Candidates should expect the minimum JEE Main scores of about 80-90 or equivalent MHT CET scores for improved possibility.
One should always refer to visit official website of Institute for the current trends of cutoffs for the required branch of interest.

Yes, it is difficult to get admission at K J Somaiya School of Engineering. The school accepts admission is based on merit and etrance exams. The college accepts several entrance exams, such as JEE Main,  MHT CET, CUET,  PERA CET, and SAT, for BTech admissions. The M.Tech admissions are based on several eligibility criteria and GATE/ PERA CET/ CUET scores.

Defence Institute of Advanced Technology has below criteria for taking admissions to it's various courses:

Courses	Eligibility
M.Sc.	Candidates having Associate Membership of the following professional bodies will also be eligible for admission to the M.S. programme of their parent discipline provided they have passed both part A and part B of the Membership examinations with a good academic record. : The Institution of Engineers (India) (Civil, Mechanical, Electrical and Electronics, Electronics and Communications), The Aeronautical society of India, The Indian Institute of Metals, The Indian Institute of chemical Engineers, The Institute of Electronics and Telecommunication Engineering. The whole mentioned eligibility is for sponsored category candidates.
PG Diploma	Candidates passed basic graduation in any branch of Science and engineering from recognised university or institution are eligible to apply.
M.E./M.Tech	Candidate must have passed Bachelor's degree in relevant discipline with minimum of 60% marks for GEN/GEN-EWS/OBC or at least 6.5 CGPA (on a 10- point scale) and 55% marks in case of SC/ST/PwD candidates or 6.0 CGPA (on a 10-point scale) from a recognised university/Institute. Final year appearning students may also apply on provisional basis. Candidate must have a valid GATE Score of the year 2020 / 2021 / 2022. Candidate who has passed from any of the professional societies such as The Institution of Engineers (India) (IE), The Institution of Civil Engineers (ICE), The Institution of Electronics and Telecommunication Engineers (IETE), The Aeronautical Society of India (AeSI), The Indian Institute of Chemical Engineers, including Polymer and Environmental Group (IIChemE), The Indian Institute of Metals (IIM), The Indian Institute of Industrial Engineers (IIE), etc. ) and has enrolled with these institutions with permanent recognition up to May 31, 2013 can also apply.

Government College of Engineering, Amravati (GCOEA) is an autonomous engineering college affiliated to Sant Gadge Baba Amravati University in Amravati, Maharashtra, India. Established in 1964, it is one of the oldest engineering institutes in state of Maharashtra. Beside engineering education, it is a recognized research center for Ph.D Programs in Civil, Mechanical, Electrical, Electronics and Computer Engineering for Amravati University.

Government Polytechnic, Mumbai is a good institution for UG Diploma, Certificate, PG Diploma, After 10th Diploma courses, and these programs are delivered by highly experienced faculty. Major specialisation at Government Polytechnic, Mumbai are AutoCAD, Video Editing (Post Production), Industrial Engineering, Sound Engineering, Electronics Engineering, Electrical Engineering, Communications Engineering, Civil Engineering, Information Technology, Computer Science Engineering, Instrumentation Technology, Mechanical Engineering, Rubber Technology.

Qualifying Cutoff Marks for Various Courses at Dr. D.Y. Patil Institute of Engineering and Technology

• B.Tech Courses:

1. B.Tech - CSE: The eligibility criteria include passing 10+2 with Physics and Mathematics as compulsory subjects along with Chemistry/Biotechnology/Biology/Technical/Vocational subjects.
2. B.Tech - Bioengineering: Specific cutoff marks were not provided in the official website. However based on the previous year cutoffs above 80 percentiles in JEE can be considered a safe score. 

• MBA Program:

For the Master of Business Administration (MBA) program, the cutoff for the academic year 2023 ranged from 90.5 to 82.14 for the general category.

 

Yes, Sanjay Ghodawat University has a good placement history. Around 85%  of students got placed  at reputable companies like Tata Motors, L&T, and TCS. The university gave its students an average annual package of Rs 3.25 lakh in 2022; the lowest package was Rs 2.5 lakh. In the same year, MBA candidates received offers of a median package worth INR 3.80 lakh annually on average. In contrast to the previous year, there was a slight decrease in the number of students placed in 2023—roughly 35% fewer students were chosen. Furthermore, there were around 8% fewer organizations visiting for placements.

Aurangabad College of Engineering has been rated 4.5 on Infrastructure parameter. Aurangabad College of Engineering has also been rated 4.5 for Campuslife.

Yes, the college can be considered good. The highest salary package reported at Lokmanya Tilak Jankalyan Shikshan Sanstha's Priyadarshini College of Engineering is INR 8 LPA, and the average salary package is approximately INR 3.2 LPA. Top recruiters include TCS, Wipro, and the Cognizant. This shows that the placement network is very strong at the college. Various trainings and liaisons conducted along with the industry results in the above record. Overall, though package specialisation may vary the platform for the engineering college going graduates into the market.

Kalyani Charitable Trust's Late G.N.Sapkal College of Engineering has been rated 3.7 for faculty as per reviews by students. This represents that Institute has decent, qualified and experienced faculty members.

Engineering job profiles vary across the industry as well as the domain where the person is recruited. Since the popular industries include petrochemicals, civil engineering, construction and other allied industries, the following job profiles are very popular and offer promising career opportunities

Job Profile	Average Annual Income (INR)
Software Engineer	4-8 LPA
Civil Engineer	3-6 LPA
Petroleum Engineer	5-8 LPA
Mining Engineer	4-7 LPA
Mechanical Engineer	3-6 LPA
Aeronautical Engineer	4-7 LPA
Metallurgical Engineer	4-6 LPA
Electrical Engineer	3-6 LPA
Electronics Engineer	3-6 LPA
Chemical Engineer	4-6 LPA

Note- The salary is taken from external sites and may vary.

More about -

Engineering Career