

M.Tech. in Mechanical Engineering (CAD/CAM)
- Private Institute
- Estd. 1983
M.Tech. in Mechanical Engineering (CAD/CAM) at BVCOE Navi Mumbai Overview
At BVCOE, there are a total of 9 specialisations under the M.E./M.Tech course. M.Tech. in Mechanical Engineering (CAD/CAM) is among the specialisations that are spread across a total academic duration of 2 years. Candidates must pay the BVCOE M.Tech. in Mechanical Engineering (CAD/CAM) fee of around INR 1,90,350. The course has an intake of 6 seats. Find below more details on the M.Tech. in Mechanical Engineering (CAD/CAM) at BVCOE:
Total Tuition Fees | ₹1.90 Lakh Get Fees details |
Duration | 2 years |
Course Level | PG Degree |
Mode of Course | Full Time |
Average package | ₹ 5.15 Lakh |
Official Website | Go to Website |
Seat breakup | 6 |
Type of University | Private |
M.Tech. in Mechanical Engineering (CAD/CAM) at BVCOE Navi Mumbai Fees
College of Engineering, Bharati Vidyapeeth M.Tech. in Mechanical Engineering (CAD/CAM) fee is an aggregate of several elements, including Tuition Fees, One-Time Admission Fees, Registration Fees, Exam fees, etc. Students might need to pay some extra charges, depending on the course. The total tuition fee for M.Tech. in Mechanical Engineering (CAD/CAM) at College of Engineering, Bharati Vidyapeeth is INR 1,90,350. Tabulated below are the details about the College of Engineering, Bharati Vidyapeeth fee breakup for M.Tech. in Mechanical Engineering (CAD/CAM):
| Fee components | Amount (2 years) |
|---|---|
Above mention fee is calculated on the basis of 1st year. Actual amount may vary. | ₹ 1.90 Lakh |
Hostel fee is calculated on the basis of 1st year. Actual fee may vary.
Meal Plan is included in mentioned fees
The hostel fee mentioned above is the cheapest option available. For other options avail Hostel fee is calculated on the basis of 1st year. Actual fee may vary.
Meal Plan is included in mentioned fees
The hostel fee mentioned above is the cheapest option available. For other options available, please refer to the fee pdf.
The fees might include components other than hostel fees | ₹ 1.53 Lakh |
₹ 3.43 Lakh |
M.Tech. in Mechanical Engineering (CAD/CAM) at BVCOE Navi Mumbai Frequently Asked Questions
Yes, Bharati Vidyapeeth College of Engineering, Pune does accept GATE scores for admission to M.Tech programme. As per the M.Tech brochure available on the college's website, students seeking M.Tech admission at the college must either appear for the BV-MTech exam conducted by the college. Or provide valid GATE scores to get into the BVCOE Pune. However, students should keep in mind that it is important to fulfil the eligibility criteria along with scoring well in the exam to secure your seat at the college.
In school of Designing pune the all out understudies consumption for MTECH is around 486.For affirmation in MTECH at COEP the stduents ought to be celigible in Entryway, MHTCET M.Tech and College Degree with half total.
The ME/MTECH is long term degree program and COEP Pune M.Tech affirmations depend on MHT CET M.Tech scores followed by guiding. those competitors who don't have a legitimate score or rank in Door or MHT-MTech are not qualified for admission to M.Tech courses of the School of Designing Pune (COEP).
MTech is offered in nine different specialisations, namely Civil – Water Resource Engineering, Civil – Hydraulics, Computer Engineering, Information Technology, Chemical Engineering, Electrical – Power Systems, Electronics – VLSI Design, Mechanical – (CAD-CAM) and Nanotechnology.
if we see the expenses of both school for MTECH is same yet position of COEP is superior to the Rajarshi Shahu college of engineer, Pune.The middle peckage of MTECH in Rajarshi Shahu college of engineer, Pune is 4 LPA though in COEP it represents 6LPA .Assuming we see the general rating on Siksha the coep is get bettter positioning than the Rajarshi Shahu college of engineer, Pune.The avg peckage for Rajarshi Shahu college of Designing, Pune is 5 LPA yet in COEP it represents 7.82 LPA .
generally the M.Tech at college of engineering - Pune better than Rajarshi Shahu college of engineer, Pune.
The absolute tution expenses of MTECH at college of engineering PUNE is 74K for 2 years.The all out stusnets admission in MTECH is around 486 .The understudies are eligbile based on Door Exam.There are around 24 courses present in ME/MTECH program.
Different charges like inn +mess is around 45 k for indian studnets and 1.9 lac per annum for NRI student.The tution expenses for all program in ME/MTECH is same .
According to the information accessible on numerous sites on the web, COEP M.Tech allowance goes from INR 11,573 to INR 12,435.
M.Tech. in Mechanical Engineering (CAD/CAM) at BVCOE Navi Mumbai Students Ratings & Reviews
- 4-51

M.Tech. in Mechanical Engineering (CAD/CAM) at BVCOE Navi Mumbai Students also asked
It's hard to say whether you can get into college of engineering - Pune (COEP) with a 70% score in JEE Fundamental because of a few elements:
- Admission through JEE Main is restricted: Just 20% of B.Tech seats at COEP are filled through JEE Main scores, while the leftover 80% depend on the Maharashtra Normal Entry Test (MHT CET). In this way, the opposition for JEE Main seats is a lot higher.
- Percentage is less important than percent: JEE Main scores are accounted for as percentiles, not rates. A 70% score could mean an alternate percentile relying upon the trouble level of the test and the quantity of test takers.
Bharti Vidyapeeth College of Engineering, Pune accepts students on an entrance basis. Students seeking to apply for any of the courses offered at the college are required to appear for either the CET conducted by Bharti Vidyapeeth or other accepted entrance exams. Foreign National/ NRI/ PIO/ OCI candidates need to present a valid score of relevant All India Common Entrance Test. Although, the institute does fill in the vacant seats through the Institutional Quota Merit category, it is still subject to fulfilment of the basic admission criteria. Students can get in contact with the admission office of the institute for further information.
Bharati Vidyapeeth College of Engineering (BVCOE) Pune accepts the following entrance exam scores for admission to its B.Tech programs:
1- JEE Main (Joint Entrance Examination)
2- MHT-CET (Maharashtra Health and Technical Common Entrance Test)
Candidates seeking admission to B.Tech programs at BVCOE Pune can apply based on their scores in these entrance exams. The cutoff scores for these exams may vary for different courses and categories.
BVCOE Pune BE admission is based on the applicants' MHT CET/JEE Main scores. Hence, the first step in the admission procedure is to apply for one of these exams. The MHT CET application window is usually open between Decemeber and February. The JEE Main exam is conducted in two sessions. The application process for the Session 1 and Session 2 exams starts around October and February, respectively.
Further, candidates with a valid exam score must register for MHT CET counselling for seat allocation. The registration process for the MHT CET CAP usually starts around July every year.
Yes, BVCOE Pune offers lateral entry admissions directly to the second year of BE. The duration of a BE (lateral entry) courses is three years. Direct second-year admission is subject to fulfilment of the following eligibility criteria:
- Candidates must be an Indian National;
- They must have passed a relevant BSc/ Diploma in Engineering and Technology with at least 45% (40% in case of candidates of backward class categories, EWS and PWD belonging to Maharashtra State only) in an appropriate branch of Engineering and Technology from a recognised institute/university;
OR
- Candidates must have passed a relevant DVoc in the same or allied sector
Download exam sample paper
M.Tech. in Mechanical Engineering (CAD/CAM) at BVCOE Navi Mumbai Placements
| Particulars | Statistics (2024) |
|---|---|
| Average Salary | INR 5.15 Lakh |
| Highest Salary | INR 19.00 Lakh |
| Median Salary | INR 7.20 Lakh |
| Lowest Salary | INR 3.30 Lakh |
| % Batch placed | 85 |
M.Tech. in Mechanical Engineering (CAD/CAM) at BVCOE Navi Mumbai Entry Requirements
M.Tech. in Mechanical Engineering (CAD/CAM) at BVCOE Navi Mumbai Admission Process
Important Dates
Explore Courses offered by BVCOE Navi Mumbai
Other courses offered by BVCOE Navi Mumbai
Get best suited colleges for you in real-time
Tell us about your city, course, budget & more
Discover best colleges that meet all your needs
Compare Courses From Similar Colleges
Similar courses in the same city
M.Tech in Quantum Computing (Quantum Communication & Sensing)
Offered by Defence Institute of Advanced TechnologyM.Tech. in Computer Science and Engineering (Artificial Intelligence)
Offered by IIIT Pune - Indian Institute of Information TechnologyM.Tech. in Artificial Intelligence and Machine Learning
Offered by Symbiosis Institute of Technology, Symbiosis International, PuneM.Tech. in Data Sciences
Offered by Pune Institute of Computer Technology, Society for Computer Technology and ResearchStudent Forum
Content authored by:
M.Tech. in Mechanical Engineering (CAD/CAM) at BVCOE Navi Mumbai News & Updates



M.Tech. in Mechanical Engineering (CAD/CAM) at BVCOE Navi Mumbai Contact Information
Main Building, Bharati Vidyapeeth Campus, Dhankawadi
Pune ( Maharashtra)
(For general query)
(For admission query)
Useful Links
Know more about BVCOE Navi Mumbai
- All About BVCOE Navi Mumbai
- Courses 2026
- Fees 2026
- Reviews on Placements, Faculty & Facilities
- Admission 2026 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- BVCOE Navi Mumbai Rankings
- Gallery 2026
- Infrastructure Details & Reviews
- BVCOE Navi Mumbai Faculty
- Compare BVCOE Navi Mumbai
- BVCOE Navi Mumbai Q&A
- Scholarships
- BVCOE Navi Mumbai News & Articles
Know more about Programs
- Engineering
- Mechanical Engineering
- M.E./M.Tech
- Food Technology
- Instrumentation Technology
- BTech Chemical Engineering
- AI & ML Courses
- Aeronautical Engineering
- BTech Petroleum Engineering
- Petroleum Engineering
- VLSI Design
- MTech in Computer Science Engineering
- Metallurgical Engineering
- BTech Robotics Engineering
- BTech in Biotechnology Engineering

