Diploma in Engineering colleges in India: Admissions, Courses, Placement, Fees

VNS Group of Institutions has been rated 3.71 for Faculty as per the Shiksha verified reviews by students. This represents that Institute has decent, qualified and experienced faculty members.

The fees structure for programs offerred by the Jnan Chandra Ghosh Polytechnic College is INR 1800.

In order to enroll for admission to various courses at International Institute of Management and Technical Studies, Mumbai, candidates must complete the last educational qualification set by the institute. Students can check course-wise eligibility from the table presented below:

Course	Common Eligibility
Pre-Graduate	Any professional with 2 years of continuous work experience & are SSC or ITI Holder from any reputed ITI/ institute
Professional Graduate	Any Professional with 2 years of continuous work experience & compulsory having HSC or Diploma from any reputed University/ Institute or Polytechnic.
PG Diploma	Any professional with 10 + 2 + 3 academic qualifications ( graduation) relevant to this stream from any institute or university. Class 12 with 03 years of relevant experience related to the stream of the course.
Advanced Graduate	Any professional with 2 years of continuous work experience & having graduation degree from any reputed university/ institute

Government Polytechnic College, Attingal have rating of 4.63 for the faculty by students. It represents that Institute has decent, qualified and experienced faculty members.

Gate Institute of Technology and Sciences has below criteria for taking admissions to it's various courses:

Courses	Eligibility
M.E./M.Tech	Candidate must have completed B.E./B.Tech. /AMIE in CSE/ CSIT/ Electronics & Computers Engg. /IT & Computer Science and Systems Engineering or equivalent from a UGC recognised University/ Institute. Preference will be given to GATE qualified candidates over TS PGECET qualified candidates. Candidate must have secured 50% marks in group subjects taken together in the qualifying examination (45% for reserved category).
B.E. / B.Tech	Candidates who have passed or appeared at the final year of the Diploma examination in Engineering conducted by the State Board of Technical Education and Training, Telangana / Andhra Pradesh or any other examination recognised as equivalent thereto by the State Board of Technical Education and Training, Telangana / Andhra Pradesh. Candidates should have completed 16 years of age, as on 31st December of the year of admission. There is no upper age limit.
MBA/PGDM	Candidate must have passed Bachelor Degree (BA / B.Com/ B.Sc/ BBA / BBM / BCA / BE / B.Tech / B. Pharmacy / Any 3 or 4 year Degree except Oriental Languages). Examinations of minimum three years duration with at least 50% marks (45% marks in case of reserved categories) in the qualifying examinations. Final year appearing students may also apply on provisional basis. The minimum age of the candidates should be 19 years as on the date of notification (Candidates whose date of Birth up to 30th MARCH, 2003). No maximum age limit.
After 10th Diploma	Candidate must have passed 10th examination from a recognised board.

Thapar Polytechnic College have rating of 4.19 for the faculty by students. It represents that Institute has decent, qualified and experienced faculty members.

Sanjay Ghodawat Polytechnic College offers various courses like After 10th Diploma in Engineering stream. Sanjay Ghodawat Polytechnic College has specializations such as Civil Engineering, Computer Science Engineering, Electrical Engineering, Electronics Engineering, Mechanical Engineering.

For the faculty Sanjivani K.B.P. Polytechnic have rating of 4.63. It represents that Institute has good, qualified and experienced faculty members.

The fee bracket for programs offerred by the Bomma Institute of Technology and Science is approximately INR 44700 - INR 252000.

Some medical field which offer best work and life balance are shown below -

• Dentistry (BDS & MDS) – Fixed clinic hours, fewer emergencies.

• Pharmacy (BPharm & MPharm) – Less stress compared to hospital-based jobs.

• Physiotherapy (BPT & MPT) – Flexible working hours, minimal emergency calls.

• Public Health & Community Medicine – Focus on preventive healthcare rather than emergency treatments.

• Clinical Research & Medical Writing – Research-based work with no direct patient responsibilities.

The seats availability for offered courses at Buddha Institute of Technology goes up to 880. Courses offerred by Buddha Institute of Technology are approved by eminent Government bodies such as AICTE.

The fee bracket for programs offerred by the Hansaba College of Engineering and Technology is approximately INR 132300 - INR 310800.

For faculty, Aditya college of Technology and Science has been rated 2.8 as per reviews.

Kshatriya College of Engineering (KCEA) is a private iinstitute established in 2001 under the aegis of Pandit Deendayal Upadyay Educational Society. KCEA is also accredited by the NAAC. The offered in affiliation with Jawaharlal Nehru Technology University, Hyderabad (JNTUH).

Nadimpalli Satyanarayana Raju Institute Of Technology has below criteria for taking admissions to it's various courses:

Courses	Eligibility
B.E. / B.Tech	Candidates who have passed Diploma in Engineering or any other examination recognised as equivalent there to, from a recognised Institute/ University, Andhra Pradesh/ Telangana are also eligible. Candidates who have appeared in Diploma in Engineering and who are awaiting their results can also apply on provisional basis. Candidates should belong to the state of Andhra Pradesh/ Telangana. Candidate should have completed 16 years of age as of 31st December of the year of admission (2023). There is no upper age limit.
MBA/PGDM	Candidate must have completed Bachelor degree of 3/4 years duration with above mentioned marks from any recognised University/Institute. 45% marks for BC categories. Candidate who are appearing for the final year degree examination are also be eligible. Degree obtained by Distance Mode Program should have recognition by Joint Committee of UGC, AICTE and DEC/DEB. Candidate who passed all the subjects of the three years of any Degree course in one sitting is not eligible for admission.
After 10th Diploma	Candidates should have passed S.S.C. Examination (Class 10th) conducted by State Board of Secondary Education, Andhra Pradesh/ Telangana or any other examination recognised as equivalent thereto by the Board of Secondary Education, A.P/TS. such as CBSE, ICSE, NIOS, A.P. Open School Society (APOSS), X class examination conducted by various State Boards of Secondary Education in India with Mathematics as one of the subjects, and obtained atleast 35% marks in the qualifying examination. Candidates belonging to NIOS/TOSS/APOSS/CBSE/ICSE/Other Examinations recognised as equivalent to SSC by A.P. Govt. should have passed all the subjects including Mathematics, Physics, Chemistry, with minimum of 35% marks in each subject. Candidates who appeared or are appearing for SSC or equivalent examination being held in May-2022, and whose results are yet to be declared can also apply. There is no age restriction.
M.E./M.Tech	Candidate must have passsed B.E./B.Tech. in relevant stream and obtained at least 50% marks (45% in case of reserved category candidates) from an AICTE/UGC approved institution recognised by the Government of Andhra Pradesh as equivalent thereto. Final year appearing students may also apply on provisional basis.

The faculty at GKM College of Engineering and Technology (GKMCET) is widely recognised as skilled and knowledgeable, with many professors holding advanced degrees, including Ph.D.s, in many engineering areas. The faculty's teaching approach reflects the college's emphasis on practical learning and industrial links. Professors are known for being approachable and encouraging, especially in technical and engineering disciplines such as Mechanical, Electronics, and Information Technology. The faculty's academic credentials and emphasis on hands-on learning experiences benefit students' entire learning environment at GKMCET.

Common University Entrance Test/ CUET UG is an entrance exam. It is conducted for admission to UG programs offered by various central, state, private and deemed universities. Candidates willing to take admission to undergraduation programme in streams like Science, Humanities, Commerce, Law and Management must appear for CUET UG exam when conducted.

This entrance examination assesses candidates at various levels: Language, domain knowledge and general aptitude. CUET UG is conducted annually in computer based mode. CUET UG scores are accepted by more than 300 universities across India. 

The average M.Tech CSE salary for fresh postgraduate students is somewhere between 4 and 7 Lakh. For mid-senior level positions, the salary range is slightly higher on the basis of the experience and skills acquired by the individuals over a few years. Their salary would be between INR 7 LPA and INR 10 LPA. For senior-level management positions, the salary in the CSE field is more than INR 10 LPA and can go up to INR 20 LPA as well because of the demand for CSE professionals in this age of digitalization.

JDT Islam Polytechnic College offers courses such as UG Diploma, After 10th Diploma. The courses are available in full-time mode. JDT Islam Polytechnic College has specializations such as Automobile Engineering, Civil Engineering, Computer Science Engineering, Electronics Engineering, Mechanical Engineering.

Eastern Academy of Science and Technology has been rated 2.1 on placements.

According to Shiksha verified reviews, for the faculty Dr. D.Y. Patil School of Polytechnic have rating of 4 It represents that Institute has good, qualified and experienced faculty members.

Jawaharlal Institute of Technology has below criteria for taking admissions to it's various courses:

Courses	Eligibility
B.E. / B.Tech	Candidate must have completed 10+2 or equivalent with Physics, Maths & Chemistry/ Biotech./ Biology/ Tech. Voc. subject/ Comp. Sc./ IT/ Informatics Practices/ Agriculture/ Engineering Graphics/ Business studies as optional subjects with the above-mentioned aggregate percentage (40% for SC/ST/OBC candidates (except Creamy layer) candidates belonging to Madhya Pradesh) in subjects taken together. Candidates passed 10+2 with grading system, must have grades equi. to mentioned aggregate %. Candidates who had passed 10+2 with grace marks in any subject can also apply provided they have scored mentioned aggregate % excluding grace marks. Result awaited student are also eligible on provisional basis. OR Candidate who have passed Diploma in Engg. & Tech. examination with at least 45% masks (40% marks in case of candidates belonging to SC/ST/OBC (excluding creamy layer) category of Madhya Pradesh) Subject to vacancies in the First Year, in case the vacancies at lateral entry are exhausted.
MCA	Candidate must have completed BCA/ Bachelor Degree in Computer Science Engineering or equivalent Degree or passed B.Sc./ B.Com/ B.A. with Mathematics at (10+2) level or at Graduate level with above mentioned aggregate percentage of any UGC/AICTE approved Indian University or from a foreign University recognised by AIU or Institute recognised by the concerned University as equivalent thereto. The mentioned SC/ST percentage is for Madhya Pradesh residents. Candidates belonging to OBC (excluding creamy layer) categories of Madhya Pradesh can apply with at least 45%. The Bachelor's degree must be of minimum three years duration.
M.E./M.Tech	Candidate must have completed B.E./B.Tech. in relevant branch of Engg./Technology with above mentioned percentage. The mentioned SC/ST percentage is for Madhya Pradesh residents. Candidate belonging to OBC (excluding creamy layer) categories of Madhya Pradesh should have at least 45%. Bachelors degree should be of minimum of four years duration and have been obtained from any AICTE approved institution or Indian University/ Institute or from a foreign University recognised by AIU or any Institutes of national importance (i.e. IITs/ IISc/NITs etc.) duly recognised by the MHRD, as equivalent thereto. Candidates in the Final year of above degree examinations can also apply on provisional basis. Rounding of marks or percentage is not permissible.
After 10th Diploma	Candidate must have passed 10th class examination/SSC examination or equivalent examination from any recognised board/center (10+2) system.

Hewett Polytechnic College has been rated 4.8 for faculty as per reviews by students. This shows that Institute has qualified and experienced faculty members.

Sri Chaitanya Technical Campus has been rated 3.4 on Infrastructure parameter. Sri Chaitanya Technical Campus has also been rated 3.9 for Campuslife.