Diploma in Engineering colleges in India: Admissions, Courses, Placement, Fees

Amrutvahini Polytechnic College have rating of 5 for the faculty by students. It represents that Institute has decent, qualified and experienced faculty members.

The seats availability for offered courses at M.L.M Group of Colleges goes up to 1078. Courses offerred by M.L.M Group of Colleges are approved by eminent Government bodies such as INC, AICTE.

The average M.Tech CSE salary for fresh postgraduate students is somewhere between 4 and 7 Lakh. For mid-senior level positions, the salary range is slightly higher on the basis of the experience and skills acquired by the individuals over a few years. Their salary would be between INR 7 LPA and INR 10 LPA. For senior-level management positions, the salary in the CSE field is more than INR 10 LPA and can go up to INR 20 LPA as well because of the demand for CSE professionals in this age of digitalization.

Yes, CMJ University is a good university which was established in 2009 by an Act of the Meghalaya State Legislature under the CMJ University Act, 2009. The university is approved by the AIU and offers undergraduate, postgraduate, PhD, MPhil, and other programmes to students. These programmes are provided across the Engineering, Management,  BTech and BTech and BSc courses. This state private university is located in Meghalaya. CMJ University Shillong has experienced faculty members. The faculty are PhD, diploma, and degree holders. The faculty motivates students to work on their knowledge and skills.

Xavier Institute of Polytechnic and Technology has below criteria for taking admissions to it's various courses:

Courses	Eligibility
After 10th Diploma	Candidate must have passed 10th standard or equivalent examination. Candidate awaiting result of 10th standard or equivalent examinaton can also apply on provisional basis. Candidate must be permanent resident or comes under permanent resident of Jharkhand. There is no minimum age requirement.

Newton's Institute of Science and Technology has below criteria for taking admissions to it's various courses:

Courses	Eligibility
After 10th Diploma	Candidates should have passed S.S.C. Examination (Class 10th) conducted by State Board of Secondary Education, Andhra Pradesh/ Telangana or any other examination recognised as equivalent thereto by the Board of Secondary Education, A.P/TS. such as CBSE, ICSE, NIOS, A.P. Open School Society (APOSS), X class examination conducted by various State Boards of Secondary Education in India with Mathematics as one of the subjects. Candidates belonging to NIOS/APOSS/Other Examinations recognised as equivalent to SSC by A.P. Govt. should have passed all the subjects including Mathematics, Physics, Chemistry, with minimum of 35% marks in each subject. Candidates who appeared or are appearing for SSC or equivalent examination being held in April/ May-2023, and whose results are yet to be declared can also apply. There is no age restriction.
M.E./M.Tech	Candidate must have passsed B.E./B.Tech. in relevant stream and obtained at least 50% marks (45% in case of reserved category candidates) from an AICTE/UGC approved institution recognised by the Government of Andhra Pradesh as equivalent thereto. Final year appearing students may also apply on provisional basis.
B.E. / B.Tech	Candidates who have passed Diploma in Engineering or any other examination recognised as equivalent there to, from a recognised Institute/ University, Andhra Pradesh/ Telangana are also eligible. Candidates who have appeared in Diploma in Engineering and who are awaiting their results can also apply on provisional basis. Candidates should belong to the state of Andhra Pradesh/ Telangana. Candidate should have completed 16 years of age as of 31st December of the year of admission (2023). There is no upper age limit.

KMCT College of Engineering for Emerging Technology has courses such as B.Tech to offer. These courses are in the stream of Engineering. KMCT College of Engineering for Emerging Technology has specializations such as B.Tech specializations in Computer Science Engineering.

Government Polytechnic, Kheda courses are approved by eminent Government bodies such as AICTE. The combined seats available for various programmes provided by Government Polytechnic, Kheda goes up to 180.

AMS College of Polytechnic has been rated 4 for faculty as per reviews by students. This shows that Institute has qualified and experienced faculty members.

The flagship courses offered at Matoshri Aasarabai Polytechnic are After 10th Diploma. The Institute has experienced faculty offering the best education to students. On the basis of Shiksha verified reviews, Matoshri Aasarabai Polytechnic has a rating of 5 by students. The college's Campus Life, Placements, Faculty, and Infrastructure have been rated as 5, 5 and 5 respectively.

According to Shiksha verified reviews, for the faculty Aravali Institute of Technical Studies have rating of 3.72. It represents that Institute has good, qualified and experienced faculty members.

Wellfare Institute of Science Technology and Management has below criteria for taking admissions to it's various courses:

Courses	Eligibility
After 10th Diploma	Candidates should have passed S.S.C. Examination (Class 10th) conducted by State Board of Secondary Education, Andhra Pradesh/ Telangana or any other examination recognised as equivalent thereto by the Board of Secondary Education, A.P/TS. such as CBSE, ICSE, NIOS, A.P. Open School Society (APOSS), X class examination conducted by various State Boards of Secondary Education in India with Mathematics as one of the subjects. Candidates belonging to NIOS/APOSS/Other Examinations recognised as equivalent to SSC by A.P. Govt. should have passed all the subjects including Mathematics, Physics, Chemistry, with minimum of 35% marks in each subject. Candidates who appeared or are appearing for SSC or equivalent examination being held in April/ May-2023, and whose results are yet to be declared can also apply. There is no age restriction.
B.E. / B.Tech	Candidates who have passed Diploma in Engineering or any other examination recognised as equivalent there to, from a recognised Institute/ University, Andhra Pradesh/ Telangana are also eligible. Candidates who have appeared in Diploma in Engineering and who are awaiting their results can also apply on provisional basis. Candidates should belong to the state of Andhra Pradesh/ Telangana. Candidate should have completed 16 years of age as of 31st December of the year of admission (2023). There is no upper age limit.

K.K.Polytechnic College have rating of 4 for the faculty by students. It represents that Institute has decent, qualified and experienced faculty members.

Om Engineering College, Junagadh offers entrance-based admission to B.E. followed by counselling. Candidates must fulfil the eligibility criteria and apply for the GUJCET entrance exam for admission. After all the procedures the college releases its merit list. If candidates get shortlisted in the merit list they have to pay the admission fee to lock their final seats.

Shahajirao Patil Vikas Pratishthan College offers various courses like After 10th Diploma in Engineering stream. Shahajirao Patil Vikas Pratishthan College has specializations such as Automobile Engineering, Computer Science Engineering, Electronics Engineering, Civil Engineering, Mechanical Engineering, Electrical Engineering.

Gonna Institute of Information Technology and Sciences has below criteria for taking admissions to it's various courses:

Courses	Eligibility
MBA/PGDM	Candidate must have completed Bachelor degree of 3/4 years duration with above mentioned marks from any recognised University/Institute. 45% marks for BC categories. Candidate who are appearing for the final year degree examination are also be eligible. Degree obtained by Distance Mode Program should have recognition by Joint Committee of UGC, AICTE and DEC/DEB. Candidate who passed all the subjects of the three years of any Degree course in one sitting is not eligible for admission.
After 10th Diploma	Candidates should have passed S.S.C. Examination (Class 10th) conducted by State Board of Secondary Education, Andhra Pradesh/ Telangana or any other examination recognised as equivalent thereto by the Board of Secondary Education, A.P/TS. such as CBSE, ICSE, NIOS, A.P. Open School Society (APOSS), X class examination conducted by various State Boards of Secondary Education in India with Mathematics as one of the subjects. Candidates belonging to NIOS/APOSS/Other Examinations recognised as equivalent to SSC by A.P. Govt. should have passed all the subjects including Mathematics, Physics, Chemistry, with minimum of 35% marks in each subject. Candidates who appeared or are appearing for SSC or equivalent examination being held in April/ May-2023, and whose results are yet to be declared can also apply. There is no age restriction.
M.E./M.Tech	Candidate must have passsed B.E./B.Tech. in relevant stream and obtained at least 50% marks (45% in case of reserved category candidates) from an AICTE/UGC approved institution recognised by the Government of Andhra Pradesh as equivalent thereto. Final year appearing students may also apply on provisional basis.
B.E. / B.Tech	Candidates who have passed Diploma in Engineering or any other examination recognised as equivalent there to, from a recognised Institute/ University, Andhra Pradesh/ Telangana are also eligible. Candidates who have appeared in Diploma in Engineering and who are awaiting their results can also apply on provisional basis. Candidates should belong to the state of Andhra Pradesh/ Telangana. Candidate should have completed 16 years of age as of 31st December of the year of admission (2023). There is no upper age limit.

K.V.N. Naik S.P. Polytechnic College has been rated 3.7 for faculty as per reviews by students. This represents that Institute has decent, qualified and experienced faculty members.

Vijaya Engineering College admission is entrance based for courses offered at UG and PG levels. Some of the popular exams accepted by the institution for admission are TS EAMCET and TSICET, etc. Admissions are conducted in online mode at Vijaya Engineering College.

No, candidates who are looking for course admission at Engineering and Management must have a valid entrance exam score as per respective courses. The college also offers direct admission. To know the direct admissions terms and conditions, students can check the points mentioned below:

• Date of Birth should not be after 01.01.1998
• Valid Jexpo 2013 Rank with 35% Marks (with Additional Subject in 10th Standard) or
• Passed Class 10 with 40% aggregate and 45% aggregate in Physical Science & Math taken together.

Students can check the selection criteria from the table presented below:

Course Name	Selection Criteria
After 10 diploma	JEXPO

Yes, top colleges offer campus placements in the final year.

Top companies visit colleges to hire students who have the right skills and passion for the job. Getting hired through these campus drives helps students start their careers while helping companies grow.

Based on the reviews provided, the faculty of the Mother Teresa Institute of Science and Technology is good. The faculty supports students and encourages them. They also help in the placement preparation. The college also provides good placement opportunities.

Feroze Gandhi Polytechnic provides programmes including PGDCA, After 10th Diploma in streams such as IT & Software, Engineering, and are excellent for students to build their careers. The institute has specializations in Electronics Engineering, Computer Science Engineering, Information Technology, Mechanical Engineering.

The seats availability for offered courses at St. Ann's College of Engineering and Technology goes up to 1476. Courses offerred by St. Ann's College of Engineering and Technology are approved by eminent Government bodies such as AICTE.

Combined intake across all courses at MGM Silver Jubilee Polytechnic College is up to 240. MGM Silver Jubilee Polytechnic College offers After 10th Diploma courses for students to build their careers in Engineering. These highly regarded programs are available in full-time mode, catering to the needs of students who wish to obtain a comprehensive education in this field.

Laxmi Devi Institute of Engineering and Technology (LIET) has been rated 3.5 for faculty as per reviews by students. This represents that Institute has decent, qualified and experienced faculty members.