

TIET Patiala MTech Courses & Fees 2026: Eligibility, Admission, Scholarships, Seats, Application
- A+ NAAC accredited
- Private University
- Estd. 1956
Thapar University MTech Eligibility & Highlights 2026
Thapar University ME/ MTech courses are given in two modes, regular mode and flexible. The university has both ME and MTech course. Also, the regular mode classes is for two-years, and for flexible mode the course lasts for five to six semesters.
Competency for admissions: The basic eligibility criteria to get admission into MTech at Thapar University are that students should complete their BE/ BTech/ BSc/ MSc degree in a relevant field with a min. of 60% (55% for SC/ST/Industry sponsored).
Note: If MSc is the qualifying exam, vacant seats (if any) will be filled based on merit, with 50% weightage to BSc marks and 50% to MSc marks (up to the pre-final year)
There are many specialisations in Thapar University ME/ MTech courses, likewise ME Mechanical Engineering, ME Structural Engineering, ME Computer Science and Engineering, MTech Biotechnology, MTech Environmental Sciences & Technology, etc.
- The eligibility criteria to enroll in these specialisations differs from specialisation to specialisation, for example- if students want to get admission into MTech in Biotechnology, they should complete BE/ BTech degree in Biotechnology/ Chemical Engineering/ Industrial Biotechnology/ Biochemical Engineering OR MSc Degree in Biochemistry/ Biotechnology/ Microbiology/ Bio-Physics/ Biology/ Botany/ Zoology/ Genetics/ MBBS/ MSc (Ag) & MVSc.
Thapar University MTech admission is decided on students' scores in GATE, then an interview/ counselling. The university also gives merit-based admissions as per the last qualifying scores. However, the preference is always given to GATE qualified students.
Commonly asked questions On Highlights
The eligibility criteria to get admissions into MTech/ME courses at Thapar University are candidates must complete their BE/BTech/BSc/MSc degree in a relevant stream from a recognised university with a minimum aggregate of 60% (55% for reserved categories and industry-sponsored). Moreover, for the selection process, the university considers the scores of GATE followed by an interview process.
Note: In case the MSc is a qualifying exam, the vacant seats (if any) shall be filled on the basis of merit prepared by giving 50% weightage to BSc marks and 50% weightage to MSc marks (up to the end of the pre-final year). An overall minimum of 60% (55% for SC/ST/industry-sponsored) in MSc shall be required to be eligible for admission.
The highest and average packages offered during the recent Thapar University placements 2025 are given below:
Particulars | Placement Statistics 2022 | Placement Statistics 2023 | Placement Statistics 2024 |
|---|---|---|---|
Highest package | INR 40 LPA | INR 55.75 LPA | INR 123 LPA |
Average package | INR 10.38 LPA | INR 11.73 LPA | INR 11.25 LPA |
The salary package recorded during TIET placements 2024 and previous two years is mentioned below:
Particulars | Placement Statistics 2022 | Placement Statistics 2023 | Placement Statistics 2024 |
|---|---|---|---|
Highest package | INR 40 LPA | INR 55.75 LPA | INR 123 LPA |
Average package | INR 10.38 LPA | INR 11.73 LPA | INR 11.25 LPA |
Median package | INR 9.5 LPA | INR 11.5 LPA | INR 10 LPA |
TIET Patiala M.E./M.TechPopular courses
Commonly asked questions On All Courses
Thapar Institute of Engineering and Technology admission 2026 is currently open for various courses. The application process at TIET is conducted online. Students can check the list of documents required for admission below:
- Class 10 and 12 Scorecard
- UG marksheet
- PG marksheet
- Date of birth certificate
- Passport-size photograph
- Transfer certificate
- Character certificate
The TIET application process is completely online. Aspirants are required to register through the official website of the institute to apply for any of the courses. Mentioned below is the step-by-step process of the TIET application process:
Step 1: Visit the official website of TIET.
Step 2: Click on “Admission 2025” and register yourself.
Step 3: Fill out the application form by entering the required academic and personal details.
Step 4: Upload a scanned photo of the qualifying exam mark sheet and a passport-size photograph.
Step 5: Pay the application fee online via debit/ credit card or net banking.
Currently, TIET has not released the cutoff for the BE course 2025 on the basis of JEE Main ranks/scores. However, to get an idea about the competitiveness of the cutoff in the previous years, candidates can check the below table:
JEE Main Last Round Closing Rank (General-All India)
| Course | 2022 | 2023 | 2024 |
|---|---|---|---|
| BE in Computer Science and Engineering | 5218 | 33814 | 54620 |
MAT 2024 registration for August was over. The next phase of exams was completed in December 2024. The schedule of MAT 2024 registration for the December phase had started at the AIMA official website. The MAT PBT, CBT and IBT form submission deadlines of each session are usually different. Additionally, MAT sessions are also conducted on different dates.
- 1
- 2
Explore popular private colleges
Students looking for M.E./M.Tech courses have shown interest these colleges
Thapar University MTech Admission Dates 2026
Thapar University MTech admission dates 2026 have been released on the website of the university. Candidates can apply for the course through the website. The admission process is done on the entrance exam. Thus, students should keep track of GATE dates. Students should apply for the course soon, as the last date can be announced at any time. Check out the more important TIET MTech admission dates from the table below:
| Dates | Upcoming Events |
|---|---|
May '26 | CCMT 2026Tentative |
27 Mar '26 - 31 May '26 | GATE 2026 Scorecard (free download)Ongoing |
1 Jun '26 - 31 Dec '26 | GATE 2026 Scorecard by paying a fee of INR 500 per test paper |
| Dates | Past Events |
|---|---|
27 Mar '26 | COAP 2026 Registration |
19 Mar '26 | GATE 2026 results |
Commonly asked questions On Admissions
Thapar University admission to most of the undergraduate, postgraduate and doctoral courses is based on candidates' performance in several national-level entrance exams. For TIET BTech admission, candidates must have class 12 and a valid JEE Main score. Apart from JEE Main, TIET also accepts CAT/XAT/CMAT/MAT/GMAT/GRE/ Thapar Entrance Test for MBA and GATE for ME/ M.Tech admission.
There's no fixed “marks” cutoff for Thapar Institute of Engineering and Technology — it works on percentile/rank, and it changes every year.
Rough idea based on trends:
- CSE / COE → ~95–97+ percentile
- ENC / ECE → ~90–95 percentile
- Mechanical / Electrical → ~85–92 percentile
- Civil / Chemical / Biotech → ~70–85 percentile
Marks vary each paper, so focus on percentile. Also, Thapar has a board marks quota, so strong 12th % can help.
You don't need a perfect score — mid 80s–90s percentile can still get you in.
For the admission to B.E./BTech courses, the Thapar University has released the JEE Main cutoff, wherein, the most and least preferred among the General All India category candidates were B.E. in Computer Science and Engineering and B.E. in Electronics Engineering (VLSI Design and Technology), respectively. The cutoff rank for CSE and EE (VLSI and Tech.) as per the Thapar University JEE Main cutoff 2025, stood at 33379 and 77189 for the General AI category candidates. Candidates can check out the 2025 cutoff data from the table below:
| Course | 2025 |
|---|---|
| B.E. in Computer Engineering | 60977 |
| B.E. in Electronics and Communication Engineering | 47689 |
| B.E. in Electronics and Computer Engineering | 69177 |
| B.E. in Computer Science and Engineering | 33379 |
| B.E. in Computer Science and Business Systems | 58400 |
| B.E. in Robotics and Artificial Intelligence | 64238 |
| B.E. in Electronics Engineering (VLSI Design and Technology) | 77189 |
| B.E. in Electrical & Computer Engineering | 73624 |
| B.Tech. in Artificial Intelligence & Machine Learning | 54769 |
No, JEE Main is mandatory for BTech admission in Thapar University. The candidate should have a valid score in JEE Main and attend counseling to get a seat. But for other UG and PG courses such as MSc, MA, and MCA, admissions are made on a merit basis, i.e., JEE is not mandatory.
Thapar University MTech Curriculum
The Thapar University regular mode MTech course is available in two years, divided into four semesters. Moreover, for the MTech flexible mode, the course is divided into three years and can be completed in five to six semesters. Thapar University MTech curriculum is a combination of laboratory classes/ development and maintenance of laboratories/ assistance in research and development activities undertaken by faculty members/ maintenance and operation of computers/ other central facilities/ assistance in the library, etc. Candidates can download the detailed Thapar University MTech syllabus from the PDF mentioned below:
Check out the GATE syllabus
| Specialization | Curriculum |
|---|---|
| M.E. in Computer Science and Engineering,TIET Patiala | |
| M.E. in Software Engineering,TIET Patiala |
Commonly asked questions On Curriculum
Thapar University offers various courses to students at UG and PG levels. At UG level, the university offers various courses to students like BTech, BA, BArch, BSc, BBA, BCom, etc. Thapar University offers courses like MTech, MBA, MSc, MCA, etc.. at the PG level for 2 years each.
Yes, Thapar University does offer M.Tech courses for a duration of over two years, divided into four semesters, and offered in full-time mode. Moreover, the university also offers ME courses in several specialsiations. The basic eligibility requirements to get admission aadmissioninto MMTech/E courses iare candidates must complete a BE/BE/BTech degree with a minimum aggregate of 60% (55% for reserved categories/ Industry sponsored).
TIET Patiala M.E./M.TechThapar University MTech Seats 2026
Thapar University Mtech seats are divided among its specialisations; the total number of seats provided by the university is 217. Moreover, 10 seats in each MSc specialisation are available for FN/ NRI candidates. 1% over and above the seats are reserved for children of employees of Thapar University. The students wanting admission under this category are required to satisfy the eligibility criteria as mentioned above for various MTech programmes. Check out the TIET MTech seat bifurcation below:
Note: Seats, if any, in the sponsored category remained unfilled; such vacant seat(s) shall be filled by General category candidates.
Commonly asked questions On Seats
Yes, Thapar University follows seat reservation policies for the MTech course. The seats are reserved for different categories as per the authorized government. Check the exact number of seats divided into different categories:
Programme | Dept. | Open | Sponsored | SC/ST | Total |
|---|---|---|---|---|---|
M.E. – Mechanical Engineering | MED | 10 | 5 | 3 | 18 |
M.E.—Transportation Engineering | CED | 10 | 5 | 3 | 18 |
M.E. – Structural Engineering | 19 | 5 | 6 | 30 | |
M.E.—Computer Science & Engineering | CSED | 71 | 5 | 14 | 90 |
M.E.—Artificial Intelligence# | 19 | 5 | 6 | 30 | |
M.E.—Electric Vehicle Technology | EIED | 10 | 5 | 3 | 18 |
M.Tech. – VLSI Design | ECED | 19 | 5 | 6 | 30 |
M.Tech.—Biotechnology | BTD | 10 | 5 | 3 | 18 |
M.Tech.—Environmental Science & Technology | DEE | 10 | 5 | 3 | 18 |
Total |
| 178 | 45 | 47 | 270 |
The total number of seats offered in the MTech course at Thapar University is 270. From which the highest number of seats are offered to MTech Computer Science and Engineering specialisation i.e., 71. Check out the number of seats allocated to other specialisation of the MTech course in the table mentioned below:
Programme | Deptt. |
| Number of Seats |
| |
Open | Sponsored | SC/ST | Total | ||
M.E. – Mechanical Engineering | MED | 10 | 5 | 3 | 18 |
M.E. – Transportation Engineering | CED | 10 | 5 | 3 | 18 |
M.E. – Structural Engineering | 19 | 5 | 6 | 30 | |
M.E. – Computer Science & Engineering | CSED | 71 | 5 | 14 | 90 |
M.E. – Artificial Intelligence# | 19 | 5 | 6 | 30 | |
M.E. – Electric Vehicle Technology | EIED | 10 | 5 | 3 | 18 |
M.Tech. – VLSI Design | ECED | 19 | 5 | 6 | 30 |
M.Tech. – Biotechnology | BTD | 10 | 5 | 3 | 18 |
M.Tech. – Environmental Science & Technology | DEE | 10 | 5 | 3 | 18 |
Total |
| 178 | 45 | 47 | 270 |
No, CAT is not compulsory to get admissions into the MBA course at Thapar University because the university accepts several other entrance examinations too for admission into the MBA course, such as MAT, SNAP, XAT, etc. Therefore, CAT can be considered as one of the accepted entrance examinations for admissions to MBA courses. However, it is not compulsory.
Thapar University MTech Placements
The recent SNU MTech placements have not been released as of now. However, you can seek the relevant page of SNU placements to get the previous years' and recent years' placements record.
Insights on Placements
Based on 442 Student ResponsesInternships and industry projects
Students can work with faculty on research projects
Employment opportunities
Many students started their own start-ups
Higher studies preferences
Both inside India & outside India
Placement support
Organized & proactive placement process
Alumni network
Strong alumni network that help with placement opportunities
Entrepreneurship cell
Very Active and resourceful, college is also involved
Overall feeling of students
Love being in college
Commonly asked questions On Placements
IT emerged as the most preferred sector among the UG students with 31% placement rate in 2023. The second in the sequence was Consulting and Electronics & Telecom with 11% placement rate in each sector. The snip below illustrates the sector-wise distribution of UG placements at Thapar University:
Source: Official Website
TIET Patiala M.E./M.TechExplore Other Courses



Thapar University MTech 2026 FAQs
Admissions to Thapar University M.Tech courses are both merit-based and entrance-based. The eligibility criteria to get admissions into MTech/ME courses at Thapar University are that candidates must complete their BE/BTech/BSc/MSc degree in a relevant stream from a recognised university with a minimum aggregate of 60% (55% for reserved categories and industry-sponsored).
Moreover, for the admission process, the university accepts GATE scores, and in case MSc is the qualifying exam, the vacant seats (if any) shall be filled on the basis of merit prepared by giving 50% weightage to BSc marks and 50% weightage to MSc marks (upto the end of the pre-final year).
As per the information available on the official website of the university, Thapar University offers three specialisations in M.Tech courses for the duration of two years, divided into four semesters, and offered in full-time mode. The names of the available specialisation are
- MTech in VLSI Design
- MTech Biotechnology
- MTech Environmental Science & Technology
The application process for MTech/ ME courses at Thapar University is conducted online and offline. To apply for the M.Tech course, candidates are required to pass the GATE examination. Below is the mentioned application fee for the M.Tech course:
| Category | Thapar University M.Tech Application Fee |
|---|---|
| Application Fee | INR 1,500 |
The M.Tech course at Thapar University is offered in full-time mode for two years. The names of the subjects included in the first semester of M.Tech in Computer Science Engineering are as follows:
- Statistical Methods and Analysis
- Advanced Data Structures
- Advanced Algorithms
- Linear Algebra and Random Processes
- Machine Learning
- Research Methodology, Ethics and IPR
Yes, candidates can pay the Thapar University M.Tech application fee offline. In case the candidate is paying the application fee offline, they are required to send the printout of the application form and must produce it at the time of the interview.
Candidates can pay the offline application fee through the DD in favour of Thapar Institute of Engineering & Technology and payable at Patiala) to “In-charge Admission Cell, ' Thapar Institute of Engineering & Technology, Patiala (Punjab)-147 004.
Candidates need to have their registered email ID and mobile number to retrieve their enrollment ID to reset their password. They must ensure that they have the access to the email ID used during the registration process.
The Thapar University placement rate has not been released as of yet. Check out the packages offered given below:
Particulars | Placement Statistics 2022 | Placement Statistics 2023 | Placement Statistics 2024 |
|---|---|---|---|
Highest package | INR 40 LPA | INR 55.75 LPA | INR 123 LPA |
Average package | INR 10.38 LPA | INR 11.73 LPA | INR 11.25 LPA |
Median package | INR 9.5 LPA | INR 11.5 LPA | INR 10 LPA |
Yes, Thapar Institute of Engineering and Technology campus is safe for girls and boys. The college campus is located in Patiala. It has a good connection with roads and public transports. CCTV cameras are installed in the campus to keep a check on students safety.
Thapar University cutoff for BE courses is based on JEE Main scores followed by the rounds of counselling. Thapar University JEE Main Counselling has been released upto Round. Tabulated below is the closing ranks for Thapar University cutoff 2023 for BE course based on JEE Main exam for All India (GENO) and Home State ( GENP) :
| Course | GENO - Closing Rank | GENP - Closing Rank |
|---|---|---|
| BE Computer Science & Engineering | 33814 | 39215 |
| BE Computer Science and Business systems | 39789 | 64761 |
| BE Computer Engineering | 44871 | 73420 |
| BE Computer Science and Engineering (Derabassi Campus) | 47219 | 125790 |
| Electronics and Computer Engineering | 48700 | 87927 |
To know the ranks for all specialisations, click here.
Thapar University cutoff 2025 via JEE Main has been released for B.E./BTech courses in the form of opening and closing ranks. As per the Thapar University JEE Main cutoff 2025, the cutoff rank needed between 46226 and 223330. Similarly, the needed rank for OBC All India quota for one and only course, CSE, is 46226. Similarly, if we talk about the General Home State quota, the needed rank must ranged between 82758 and 501201. To know more cutoff-related information, candidates can click here:
Thapar University cutoff 2024 has been released for PGDM course through NMAT exam. To get into Thapar University, the required cutoff score for the open category candidates stood at 150 in 2024. It remained same as of the NMAT 2023 cutoff. However, in 2022, it stood at 140. For more details on cutoff, check-out this page.
While preparing cutoffs for the Thapar University BTech course, the authorities will consider examination and admission-related factors. The listed factors will be checked and considered by the authorities while determining the cutoff of the Thapar University BTech course: previous years' cutoff trends, difficulty level of the exam, total number of qualified candidates, total number of candidates applying for a specific course or institute, number of seats available for admission, etc. After checking all of these factors, the authorities will prepare the Thapar University JEE Mains/ NEET cutoff.
The packages offered during the Thapar University placements in recent years are given below:
Particulars | Placement Statistics 2022 | Placement Statistics 2023 | Placement Statistics 2024 |
|---|---|---|---|
the highest package | INR 40 LPA | INR 55.75 LPA | INR 123 LPA |
Average package | INR 10.38 LPA | INR 11.73 LPA | INR 11.25 LPA |
Median package | INR 9.5 LPA | INR 11.5 LPA | INR 10 LPA |
The top companies that took part during the Thapar University placements are listed below:
Thapar University Top Recruiters | |
|---|---|
EY | Rapido |
KPMG | Optum |
PepsiCo | JSW |
Nestle | Adani |
Axis Bank | Airtel |
Thapar University admission to the BE courses is based on JEE Main scores as well as on candidates' performance in Class 12. TIET BE cutoff 2025 has been released via JEE Main for Round 1, wherein the closing ranks varied between 46226 and 223330 for the General AI category students. Within the BE specialisations, the lowest rank was for CSE, indicating its competitivess among the Engineering aspirants at Thapar University.
For B.E. in Computer Science and Business Systems, the JEE Main Round 1 cutoff rank stood at 77480 for admission. Candidates seeking admission at TIET Patiala can refer to the table below to view the TIET JEE Main cutoff 2025 for BE across multiple specialisations for the General AI category students.
| Course | JEE Main Cutoff 2025 (Round 1 Closing Rank) |
|---|---|
| B.E. in Electronics and Communication Engineering | 186304 |
| B.E. in Electronics and Computer Engineering | 158978 |
| B.E. in Computer Science and Engineering (Derabassi Campus) | 104067 |
| B.E. in Computer Science and Engineering | 46226 |
| B.E. in Computer Science and Business Systems | 77480 |
| B.E. in Robotics and Artificial Intelligence | 137781 |
| B.E. in Electronics Engineering (VLSI Design and Technology) | 223330 |
| B.E. in Electrical & Computer Engineering | 186883 |
| B.Tech. in Artificial Intelligence & Machine Learning | 86459 |
The average package recorded over the past three years during Thapar University placement is mentioned below:
Particulars | Placement Statistics 2022 | Placement Statistics 2023 | Placement Statistics 2024 |
|---|---|---|---|
Average package | INR 10.38 LPA | INR 11.73 LPA | INR 11.25 LPA |
Thapar University cutoff 2024 has been released for the JEE Main Round 1 Seat Allotment results for various BE courses. The university offers admissions based on the JEE Main scores followed by the round-wise counselling. Tabulated below Thapar University cutoff 2024 for the R1 for the General category candidates:
| Course | Round 1 Cutoff 2024 |
|---|---|
| B.E. in Computer Engineering | 86730 |
| B.E. in Electronics and Communication Engineering | 112350 |
| B.E. in Electronics and Computer Engineering | 99216 |
| B.E. in Computer Science and Engineering (Derabassi Campus) | 78027 |
| B.E. in Computer Science and Engineering | 32664 |
| B.E. in Computer Science and Business Systems | 49810 |
| B.E. in Electrical and Computer Engineering | 110566 |
| B.E. in Robotics and Artificial Intelligence | 91714 |
| B.E. in Electronics Engineering (VLSI Design and Technology) | 136358 |
According to unofficial online sources, a large share of Thapar University alumni is working in the Engineering sector with 36% share. The other top sectors that involve the majority of alumni are Business Development and Operations. The pie chart given below illustrates the detailed sector-wise distribution of alumni:
NOTE: The sectors involved in the 'Others' category are Programme and Project Management, Research, Consulting, and Sales.
TIET Patiala
Student Forum
Answered 16 hours ago
At Thapar Institute of Engineering and Technology:
- Main campus = better faculty, exposure, peer group
- Stronger placement opportunities
- More companies + better overall environment
Dera Bassi campus is newer, so:
- Fewer opportunities comparatively
- Placements are okay but not at Patiala level
Even in 2020, mos
M
Contributor-Level 6
Answered 16 hours ago
Yeah, Thapar does have that board merit route with JEE as a tiebreaker.
For CSE at Thapar Institute of Engineering and Technology, it's quite competitive even through boards.
Rough idea:
- You usually need around 95–97%+ in PCM to be safe
- With 93–95%, chances become borderline (depends on year)
- JEE percent
M
Contributor-Level 6
Answered Yesterday
no, not really.
At Thapar Institute of Engineering and Technology, there’s no direct/management quota admission like some private colleges.
Admissions are mainly through:
- JEE Main score
- 12th PCM marks (board merit category in some rounds)
If someone is offering you a “direct paid seat,” be careful — that
M
Contributor-Level 6
Answered Yesterday
For Thapar Institute of Engineering and Technology (recent cycles), B.Tech admissions usually:
- Applications close around May–June (with possible extensions)
- Counselling rounds continue till July–August
Exact dates change every year, so the safest move is to apply early and track rounds.
M
Contributor-Level 6
Answered 2 weeks ago
Starting at Thapar Institute of Engineering and Technology? You'll be fine — just don't overcomplicate it.
First few months, focus on settling in. Make friends in your hostel and class — that circle matters a lot more than people think.
Don't ignore academics from day one. It is easy to get carried aw
M
Contributor-Level 6
Content authored by:
Updated on Dec 1, 2025
TIET Patiala Notifications
TIET PatialaTake a look at Campus
Campus Building
Campus Bulding
Campus Building

TIET Patiala News & Updates



TIET PatialaContact Information
TIET P.O. Box 32, Bhadson Road
Patiala ( Punjab)
Useful Links
Know more about TIET Patiala
- All About TIET Patiala
- Fees 2026
- Reviews on Placements, Faculty & Facilities
- Admission 2026 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Cut off & Merit List 2026
- TIET Patiala Rankings
- Gallery 2026
- Infrastructure Details & Reviews
- TIET Patiala Faculty
- Compare TIET Patiala
- TIET Patiala Q&A
- Scholarships
- TIET Patiala News & Articles


CSE at Patiala or Derabassi, which one is better and placement 2020? Thapar Institute Patiala!