5 Photos
M.E. in CAD/CAM
- Public/Government Institute
- Estd. 1968
M.E. in CAD/CAM
Table of contents
- Overview
- Fees
- Student Reviews
- Placements
- Entry Requirements
- + 1 more item
M.E. in CAD/CAM at Central Institute of Plastics Engineering and Technology, Chennai Overview
M.E. in CAD/CAM
at Central Institute of Plastics Engineering and Technology, Chennai
Central Institute of Plastics Engineering and Technology, Chennai offers a 2 years M.E. in CAD/CAM course at the PG level. A total of 18 students can enrol in this course. The total tuition fee for the entire duration of this course is INR 50,000. Find out more about other courses under Central Institute of Plastics Engineering and Technology, Chennai M.E./M.Tech.
Total Tuition Fees | ₹50,000 Get Fees details |
Duration | 2 years |
Course Level | PG Degree |
Mode of Course | Full Time |
Official Website | Go to Website  |
Seat breakup | 18 |
Type of University | Public/Government |
M.E. in CAD/CAM at Central Institute of Plastics Engineering and Technology, Chennai Fees
M.E. in CAD/CAM
at Central Institute of Plastics Engineering and Technology, Chennai
Central Institute of Plastics Engineering and Technology, Chennai M.E. in CAD/CAM fee is a cumulative of various components, such as the tuition fees, one-time fees, registration fees, and exam fees, etc. However, students might have to pay extra charges specific to the institution. The total tuition fee at Central Institute of Plastics Engineering and Technology, Chennai for the entire duration of the course is INR 50,000. More details around Central Institute of Plastics Engineering and Technology, Chennai M.E. in CAD/CAM fee breakup is as follows:
| Fee components | Amount (2 years) |
|---|---|
The fees might include components other than tuition fees.
Mentioned fee is as per Tamil Nadu Engineering Admission (TNEA- 2023).
The mentioned fee is for Non-Accredited courses.
Only Accredited Fee w The fees might include components other than tuition fees.
Mentioned fee is as per Tamil Nadu Engineering Admission (TNEA- 2023).
The mentioned fee is for Non-Accredited courses.
Only Accredited Fee will be applicable if the program/courses is currently accredited by NBA. If not, then above mentioned fee will be applicable.
Total Accredited fee- INR 60000. | ₹ 50,000 |
₹ 50,000 |
These are based on information available on various sources. Latest values may differ.S
Sachin shukla
M.E. in CAD/CAM - Batch of 2018
5
5Placements5Infrastructure5Faculty5Crowd & Campus Life5Value for Money
Placements in 2015 is really good.
Placements: 60 to 80% of students enrol in my college and my Diploma is in Plastics Technology batch from 2015 to 2018. The placement It is better than other colleges but there is no highest or the lowest package in our course. My course is not required by any company. They treat everyone the same way.
Infrastructure: All the staff are good, and their behaviour is also good. This college also has Wi-Fi access. Labs are also available at this college. Hostel facilities are good compared to other colleges. Medical facilities are also available at this college.
Faculty: The required pass percentage is 70%. It is extremely difficult to pass this exam for the Diploma in Plastics Technology, but the teachers are excellent and teach very well, so we will pass. Yes, the course prepares students for the workforce. The teaching quality is very good, and the teachers are also good in this college.
Reviewed on 23 Aug 2022Read More
View 1 Review
M.E. in CAD/CAM at Central Institute of Plastics Engineering and Technology, Chennai Frequently Asked Questions
M.E. in CAD/CAM
at Central Institute of Plastics Engineering and Technology, Chennai
Q: Which courses does Central Institute of Plastics Engineering and Technology, Chennai offer?
A:
Central Institute of Plastics Engineering and Technology, Chennai provides programmes including PG Diploma, M.E./M.Tech, UG Diploma, B.E. / B.Tech in streams such as Engineering, IT & Software, and are excellent for students to build their careers. The institute has specializations in Mechanical Engineering, Polymer Technology.
AskShikshaGPT on App
Q: Can you list some important B Tech subjects?
A:
Below are some of the general subjects that you can pick during your BTech studies, as these course will advance your technical and practical knowledge:
- Mathematics: A mathematical background includes understanding of Calculus, Linear Algebra, Differential Equations and Statistic Stamina.
- Physics: Mechanics, electricity & magnetism, kinetics & dynamics, thermodynamics and wave & optics.
- Chemistry: This common general chemistry course involves sub-topics such as organic chemistry, inorganic chemistry among others.
- Programming: C+, Python, Java
- Engineering fundamentals: Statistics, dynamics, fluids and their action, heat and its work, properties of matter
- Engineering design: Aesthetics, reasoning process, design tools and methods, using of computer-aided design (CAD).
Rest, the subjects taught in the BTech courses would be specialization-specific, based on your chosen field.
AskShikshaGPT on App
Q: What is the intake for offered courses at Central Institute of Plastics Engineering and Technology, Chennai?
A:
The seats availability for offered courses at Central Institute of Plastics Engineering and Technology, Chennai goes up to 564. Courses offerred by Central Institute of Plastics Engineering and Technology, Chennai are approved by eminent Government bodies such as AICTE.
AskShikshaGPT on App
Q: Is Central Institute of Plastics Engineering and Technology, Chennai a good college/Institute?
A:
Central Institute of Plastics Engineering and Technology, Chennai is a well-known institution for PG Diploma, M.E./M.Tech, UG Diploma, B.E. / B.Tech courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, Central Institute of Plastics Engineering and Technology, Chennai has a rating of 4.28 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 4.09 on Campus Life, 4.36 on Placements, 4.26 on Faculty and 4.18 on Infrastructure.
AskShikshaGPT on App
Download exam sample paper
TANCET
TANCET
M.E. in CAD/CAM at Central Institute of Plastics Engineering and Technology, Chennai Placements
M.E. in CAD/CAM
at Central Institute of Plastics Engineering and Technology, Chennai
Top Recruiters for Central Institute of Plastics Engineering and Technology, ChennaiBright Auto plast
Fanuc
Inventa Technologies
Reliance Industries Limited
Reynolds
VKC Group
M.E. in CAD/CAM at Central Institute of Plastics Engineering and Technology, Chennai Entry Requirements
M.E. in CAD/CAM
at Central Institute of Plastics Engineering and Technology, Chennai
General
SC
ST
Graduation
- 50%
- Read more
Candidate must have completed bachelor’s degree or equivalent in the relevant field and obtained at least mentioned marks, 45% in the case of BC, BCM, MBC, SC, SCA and ST candidates belonging to Tamil Nadu in the qualifying degree examination. (i) B.E. / B.Tech. / B.Arch. Degree Programmes (or) (ii) B.Pharm. Degree Programmes.
TANCET
CEETA
Other eligibility criteria
Candidates who have cleared master’s degree in the relevant branch of Science / Arts, which are prescribed.
Or
Candidates who have cleared 10 + 2 + AMIE + 2 Yrs of experience are also eligible to apply.
M.E. in CAD/CAM at Central Institute of Plastics Engineering and Technology, Chennai Admission Process
M.E. in CAD/CAM
at Central Institute of Plastics Engineering and Technology, Chennai
Important Dates
ALL
CEETA
TANCET
Feb 25 - 28, 2026
TANCET registration windowTentative
Mar 1 - 30, 2026
TANCET admit card downloadTentative
Mar 30, 2026
TANCET exam date for MBA & MCATentative
Explore Courses offered by Central Institute of Plastics Engineering and Technology, Chennai
Select the Degree you are Interested in
Select the Stream you are Interested in
Other courses offered by Central Institute of Plastics Engineering and Technology, Chennai
Get best suited colleges for you in real-time
Here’s how it works:
Share your preferences with our assistant
Tell us about your city, course, budget & more
Get recommendations in no time
Discover best colleges that meet all your needs
It won’t take more than a minute!
Read M.E./M.Tech reviews from Central Institute of Plastics Engineering and Technology, Chennai
Read ReviewsCompare Courses From Similar Colleges
₹50 K
Overall Rating– / –
₹1 L
Overall Rating– / –
₹9 L
Overall Rating– / –
₹50 K
Overall Rating– / –
₹50 K
Overall Rating– / –
₹50 K
Overall Rating– / –
₹50 K
Overall Rating– / –
₹50 K
Overall Rating– / –
₹50 K
Overall Rating– / –
₹50 K
Overall Rating– / –
Similar courses in the same city
₹1 L
Overall Rating– / –
₹3.2 L
Overall Rating
4.3
4.3₹50 K
Overall Rating5.0
5.0₹3 L
Overall Rating– / –
M.Tech. in Information Technology (Artificial Intelligence and Data Science)
Offered by Anna University– / –
Overall Rating– / –
₹50 K
Overall Rating– / –
₹5.98 L
Overall Rating4.2
4.2₹50 K
Overall Rating– / –
– / –
Overall Rating4.2
4.2₹50 K
Overall Rating– / –
M.E. in CAD/CAM at Central Institute of Plastics Engineering and Technology, Chennai Students also asked
M.E. in CAD/CAM
at Central Institute of Plastics Engineering and Technology, Chennai
Q: What specializations do Central Institute of Plastics Engineering and Technology, Chennai offer in their courses?
A:
Central Institute of Plastics Engineering and Technology, Chennai is a good institution for PG Diploma, M.E./M.Tech, UG Diploma, B.E. / B.Tech courses, and these programs are delivered by highly experienced faculty. Major specialisation at Central Institute of Plastics Engineering and Technology, Chennai are Mechanical Engineering, Polymer Technology.
AskShikshaGPT on App
Q: What is the fees range for courses offerred by the Central Institute of Plastics Engineering and Technology, Chennai?
A:
The fees range for courses offerred by the Central Institute of Plastics Engineering and Technology, Chennai is around INR 50000 - INR 200000.
AskShikshaGPT on App
M.E. in CAD/CAM
at Central Institute of Plastics Engineering and Technology, Chennai
Student Forum
Anything you would want to ask experts?Content authored by:
M.E. in CAD/CAM at Central Institute of Plastics Engineering and Technology, Chennai Take a look at Campus
M.E. in CAD/CAM
at Central Institute of Plastics Engineering and Technology, Chennai
Academic Block
Video Conferencing Room
Digital Library
Seminar Hall
Tool RoomM.E. in CAD/CAM at Central Institute of Plastics Engineering and Technology, Chennai News & Updates
M.E. in CAD/CAM
at Central Institute of Plastics Engineering and Technology, Chennai
Latest
Popular
Salviya Antony · Feb 20, 2026
13.3K views
Anangsha Patra · Feb 20, 2026
26.8K views
Md Shahzad · Feb 20, 2026
8.2L views
Anangsha Patra · Feb 20, 2026
27.7K views
View all News & Updates
M.E. in CAD/CAM at Central Institute of Plastics Engineering and Technology, Chennai Contact Information
M.E. in CAD/CAM
at Central Institute of Plastics Engineering and Technology, Chennai
Address
T.V.K. Industrial Estate,
Guindy,
Chennai
Chennai ( Tamil Nadu)
Phone
Email
Go to College Website ->
Useful Links
Know more about Central Institute of Plastics Engineering and Technology, Chennai
- All About Central Institute of Plastics Engineering and Technology, Chennai
- Courses 2026
- Fees 2026
- Reviews on Placements, Faculty & Facilities
- Admission 2026 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Cut off & Merit List 2026
- Gallery 2026
- Infrastructure Details & Reviews
- Central Institute of Plastics Engineering and Technology, Chennai Faculty
- Compare Central Institute of Plastics Engineering and Technology, Chennai
- Central Institute of Plastics Engineering and Technology, Chennai Q&A
- Central Institute of Plastics Engineering and Technology, Chennai News & Articles
Know more about Programs
- Engineering
- Mechanical Engineering
- M.E./M.Tech
- Food Technology
- Instrumentation Technology
- BTech Chemical Engineering
- AI & ML Courses
- Aeronautical Engineering
- BTech Petroleum Engineering
- Petroleum Engineering
- VLSI Design
- MTech in Computer Science Engineering
- Metallurgical Engineering
- BTech Robotics Engineering
- BTech in Biotechnology Engineering