B.E. in Mechanical Engineering
- B++ NAAC accredited
- Private Institute
- Estd. 2012
B.E. in Mechanical Engineering at DYPIEMR Overview
B.E. in Mechanical Engineering is a 4 years programme provided at DYPIEMR. Candidates can pursue this course after qualifying the Dr. D.Y. Patil Institute of Engineering Management and Research, Akurdi selection process. There are a total of 120 seats available for B.E. in Mechanical Engineering. Check the following section for more details around Dr. D.Y. Patil Institute of Engineering Management and Research, Akurdi B.E. in Mechanical Engineering fees, admission process and more.
Total Tuition Fees | ₹3.59 Lakh Get Fees details |
Duration | 4 years |
Course Level | UG Degree |
Mode of Course | Full Time |
Official Website | Go to Website  |
Seat breakup | 120 |
Type of University | Private |
- Overview
- Fees
- Highlights
- Student Reviews
- Placements
- + 3 more items
B.E. in Mechanical Engineering at DYPIEMR Fees
Dr. D.Y. Patil Institute of Engineering Management and Research, Akurdi B.E. in Mechanical Engineering fees includes components, namely examination, medical, seat rent, etc. The tuition fee may subject to vary depending on the category a candidate belongs to. Check the table provided below to know about Dr. D.Y. Patil Institute of Engineering Management and Research, Akurdi B.E. in Mechanical Engineering fees in detail:
| Fee components | Amount (4 years) |
|---|---|
Tuition fee is calculated on the basis of 1st year/semester. Actual amount may vary.
Mentioned fee is as per Fee Regulating Authority, Maharashtra State. | ₹ 3.59 Lakh |
₹ 3.59 Lakh |
These are based on information available on various sources. Latest values may differ.B.E. in Mechanical Engineering at DYPIEMR Highlights
- Institutes also offers classes in Evening shifts
B.E. in Mechanical Engineering at DYPIEMR Students Ratings & Reviews
Placements3.8
Infrastructure4
Faculty & Course3.9
Campus Life4.2
Value for Money3.9
B.E. in Mechanical Engineering at DYPIEMR Frequently Asked Questions
Those seeking to apply to the BTech programme offered at Dr. D.Y Patil Institute of Engineering Management and Reserach must fulfil the eligibility criteria specified by the institute. DYPIEMR accepts students for its BTech course based on a valid score in the entrance tests such as JEE Main and MHT CET. Hence, a candidate seeking admission to the course must secure a good enough score to qualify for admission/ further rounds of selection.
Candidates must fulfill the admission eligibility criteria for the BTech programme at the Dr. D.Y. Patil Institute of Engineering Management and Research. They will need to submit an admission application form. Eligible candidates will be allotted BTech seats based on their academic background in addition to their accepted entrance test scores. Candidates must pay the required application fee to hold their seats.
Download exam sample paper
B.E. in Mechanical Engineering at DYPIEMR Placements
| Particulars | Statistics (2024) |
|---|---|
| Highest Salary | INR 7.50 Lakh |
Top Recruiters for DYPIEMRB.E. in Mechanical Engineering at DYPIEMR Entry Requirements
- 45%
- Read moreCandidate must have passed / appearing 10+2 or HSC or equivalent examination with Physics and Mathematics as compulsory subjects along with one of the Chemistry or Biotechnology or Biology or Technical Vocational subject or Computer Science or Information Technology or Informatics Practices or Agriculture or Engineering Graphics or Business Studies and obtained at least mentioned marks in the above subjects taken together, from a recognized board. The mentioned OBC, SC, ST percentage is only applicable to candidates belonging to Maharashtra state.
B.E. in Mechanical Engineering at DYPIEMR Admission Process
- CounsellingAdmission is through counselling based on the rank/ score obtained in Maharashtra Common Entrance Test (MHT-CET) All India candidate can apply based on score obtained in JEE Mains. If seats remained vacant after State and All India Level Counselling, vacant seats will be filled through CAP.
Important Dates
B.E. in Mechanical Engineering at DYPIEMR Cutoffs
3JEE Main round-wise cutoff Rank: (General-All India)
| Round | 2021 | 2022 | 2023 |
|---|---|---|---|
| 1 | 770113 | 544845 | 209466 |
| 2 | 759723 | 280749 | 210585 |
| 3 | - | - | 190167 |
JEE Main round-wise cutoff Rank: (OBC-All India)
| Round | 2021 | 2022 | 2023 |
|---|---|---|---|
| 1 | 770113 | 544845 | 209466 |
| 2 | 759723 | 280749 | 210585 |
| 3 | - | - | 190167 |
MHT CET round-wise cutoff Rank: (General-All India)
| Round | 2019 | 2020 | 2021 |
|---|---|---|---|
| 1 | 82.41 | 72.33 | 63.94 |
| 2 | 80.57 | 66.79 | 47.78 |
| 3 | 79.63 | - | - |
MHT CET round-wise cutoff Rank: (General-Home State)
| Round | 2021 | 2022 | 2023 |
|---|---|---|---|
| 1 | 2.13 | 46.17 | 66.96 |
| 2 | 1.4 | 45.99 | 66.06 |
| 3 | - | 64.5 | 76.64 |
MHT CET round-wise cutoff Rank: (OBC-All India)
| Round | 2019 | 2020 | 2021 |
|---|---|---|---|
| 1 | 79.63 | 51.64 | 15.41 |
| 2 | 84.85 | 55.32 | 0.53 |
| 3 | 78.36 | - | - |
MHT CET round-wise cutoff Rank: (OBC-Home State)
| Round | 2020 | 2022 | 2023 |
|---|---|---|---|
| 1 | 17.4 | 21.88 | 61.64 |
| 2 | - | 39.31 | 63.39 |
| 3 | - | 59.53 | - |
Explore Courses offered by DYPIEMR
Other courses offered by DYPIEMR
Get best suited colleges for you in real-time
Tell us about your city, course, budget & more
Discover best colleges that meet all your needs
Compare Courses From Similar Colleges
Similar courses in the same city
4.14.3B.Tech. in Computer Science and Engineering
Offered by Symbiosis Institute of Technology, Symbiosis International, Pune4.04.03.93.83.94.14.1B.E. in Mechanical Engineering at DYPIEMR Students also asked
For 2025, DYPIEMR MHT CET cutoff data is not available. However, in 2023, the MHT CET last round cutoff percentile for BTech admission ranged between 39.04 and 95.88, for the students belonging to the General Home State quota.
In 2023, the Dr. D.Y. Patil Institute of Engineering Management and Research, Akurdi JEE Main cutoff ranks varied between 38276 and 208419 for the students belonging to the General AII India quota for BTech admission. Among all the specialisations, the most competitive was Computer Engineering, with the lowest closing rank of 38276 in 2023.
The final rank of Dr. D.Y. Patil Institute of Engineering Management and Research, Akurdi Cutoff 2023, final round was 60496 of B.E. Artificial Intelligence and Data Science Course. The last place in the final round in 2022 and 2021 was B.E. 127520 and 172447 for artificial intelligence and data science, respectively. PhD in Artificial Intelligence and Data Science considering the final ranking of the 8th round of B.E. D.Y. studied in the past three years. Patil Institute of Engineering Management and Research in Akurdi has seen significant improvement. Also, it is. Bachelor's degrees in Artificial Intelligence and Data Science were the most competitive specialization, followed by B.E. in Artificial Intelligence and Data Science with Dr. D.Y. Patil Institute of Engineering Management Research, Akurdi considers the gap with its competitors.
The overall cutoff for the MHT-CET at Dr. D.Y. Patil Institute of Engineering Management and Research (DYPIEMR) in 2023 was 74.19–85.92 percentile. The college accepts the JEE Main and MHT CET exams.
The cutoffs for other courses in 2022 were:
BE Mechanical Engineering: 30.3
BE Artificial Intelligence and Data Science: 88.27
BE Electronics & Telecom Engineering: 85.83
BE Computer Engineering: 93.33
The college also has a management quota. If you take admission through the management quota before the second round of CET, you will have to pay approximately 2 lakhs.
You can check the 2023 cutoff for Dr. D.Y. Patil Institute of Engineering Management and Research on Google:
MHT-CET: The overall cutoff for MHT-CET is 74.19 - 94.9 percentile.
BE Civil Engineering: The 2023 cutoff is 74.19 percentile.
BE Mechanical Engineering: The 2023 cutoff is 76.92 percentile.
BE Chemical Engineering: The 2023 cutoff is 85.92 percentile.
You can also check the cutoff for the MBA programme at the Dr. D.Y. Patil Institute of Management and Research:
Round 2 in 2023: The closing scores for all MBA specializations ranged from 90.45 to 82.14.
You can also check the cutoff for the Dr. D.Y. Patil Institute of Technology:
MAHCET: The overall cutoff for MAHCET is 87.02 percentile.
Student Forum
Anything you would want to ask experts?Answered 2 years ago
S
Contributor-Level 10
Answered 2 years ago
S
Contributor-Level 10
Answered 6 years ago
Scholar-Level 16
Answered 6 years ago
Scholar-Level 17
Answered 6 years ago
Scholar-Level 18
Answered 7 years ago
S
Contributor-Level 6
Answered 7 years ago
A
Contributor-Level 9
Answered 7 years ago
S
Contributor-Level 6
Content authored by:
B.E. in Mechanical Engineering at DYPIEMR News & Updates
B.E. in Mechanical Engineering at DYPIEMR Contact Information
D. Y. Patil Educational Complex, Sector 29, Nigidi Pradhikaran
Pune ( Maharashtra)
(For general query)
(For admission query)
Useful Links
Know more about DYPIEMR
Know more about Programs
- Engineering
- Mechanical Engineering
- B Tech (Bachelor of Technology)
- Food Technology
- Instrumentation Technology
- BTech Chemical Engineering
- AI & ML Courses
- Aeronautical Engineering
- BTech Petroleum Engineering
- Petroleum Engineering
- VLSI Design
- MTech in Computer Science Engineering
- Metallurgical Engineering
- BTech Robotics Engineering
- BTech in Biotechnology Engineering
Can I get direct admission in mechanical engineering 2nd year? I have completed Diploma in mechanical engineering and scored 73.92 aggregate