B.E. in Mechanical Engineering
- Private Institute
- Estd. 1994
3.8
4.1
4.1
3.5
4.0
T
Tanish Antre 
B.E. in Mechanical Engineering - Batch of 2028
3.8
Pretty satisfied with the college, knew what I was getting into. Campus life could be better.
Placements: About 70% of the students got placed. The lowest package is 3 LPA. The highest salary is around 16 LPA - 18 LPA. Top recruiters are Godrej and TCS. Internships are compulsory for every student in 3rd or 4th year. The college is now offering B.Tech instead of BE since it just got autonomous status.
Infrastructure: The facilities are really good. Hostels are pretty good too. All the branches have a lot of labs with really good equipment. Wi-Fi isn't available for students but the PCs have it. The quality of the food in the canteen is top-notch without a doubt.
Faculty: The curriculum is now handled by the college because of autonomy. Teachers are really helpful and qualified. They do their best to teach everyone. The course is very relevant to the current trends in the market as it promotes outcome-based education. The exams are fairly easy to pass here.
Reviewed on 17 Feb 2025Read More
R
Rushil
B.E. in Mechanical Engineering - Batch of 2027
2.6
Average College with No Student Life.
Placements: Mechanical had an average placement according to them, but it's really low and has a really less package. They give paid internships through the college this semester, and final years have some internship possibilities. But during the semester break, if you get an internship offer during the semester, they won't allow you and don't provide the internship letter. They cut your attendance and exams.
Infrastructure: There's no Wi-Fi facility available at all in the college for students. The library is strict and has poor infrastructure. There's a multimedia section with computers, but they are so old and outdated that they won't even start within 15 minutes. Doing the work takes 2 hours on them. The hostel is too strict for everyone, and the boys' hostel is still okayish, but the girls' hostel and hostel warden are like a switch for them.
Faculty: Mechanical engineering is just about lectures, and there should be more industry-level education and labs rather than just lectures. But the college only focuses on academics and nothing else. 90% of the faculty just come in, show PPTs, read them out, and go. They yell at students for sleeping after 7 hours of continuous lectures. Some won't even allow students to go to the washroom after the first lecture, even though we were sitting in the class for more than 3 hours straight.
Reviewed on 17 Jan 2025Read More
(4) 4 people found this helpfulS
Saiprem Kaldur
B.E. in Mechanical Engineering - Batch of 2027
4.4
Excellent teaching faculty, great facilities and good placements.
Placements: According to the sources on our college website, mostly 80% of the students are placed in our branch and some percent of students opt for higher studies for our branch (mechanical) companies, such as L&T, Godrej, etc., which hire engineers. Internship opportunities are very few, but if you have the skills, then no worries.
Infrastructure: Talking about the infrastructure, it is quite good; it is not so big, but decent. The library and labs also have sufficient resources, like a multimedia section in the library, which is very useful for those of us who don't have laptops. There is no such college Wi-Fi we have had until now.
Faculty: The faculty is very well suited for the students who want to study. Quality education is provided, and the curriculum is very well managed. They conduct assignment tests, which help in internal assessment tests and prelims for final semester exams. The course curriculum is from a Mumbai university so don't expect that much industry readiness.
Other: I was very interested in electronics and mechanics so I opted for mechanical. They have two early events called as Faces and etamax Faces, which was the best event I had because their were many sports and cultural events to participate in, which made us more competitive, I personally participated in badminton doubles with my friend and the management was well-oriented, but in group events such as cricket and volleyball, etc. There is also a lot of politics, like choosing the players on the basis of friendships or on the basis of identification, which they hate the most. I personally got a TFWS seat so my fees were 90% less than the total actual.
Reviewed on 23 Dec 2023Read More
View more 21 Reviews
B.E. in Mechanical Engineering
Table of contents
- Overview
- Fees
- Student Reviews
- Placements
- Entry Requirements
- + 2 more items
B.E. in Mechanical Engineering at Fr. C. Rodrigues Institute of Technology Overview
B.E. in Mechanical Engineering
at Fr. C. Rodrigues Institute of Technology
Father Angel Engineering College Vashi offers a 4 years B.E. in Mechanical Engineering course at the UG level. A total of 120 students can enrol in this course. The total tuition fee for the entire duration of this course is INR 6,22,612. Find out more about other courses under Father Angel Engineering College Vashi B.E. / B.Tech.
Total Tuition Fees | ₹6.23 Lakh Get Fees details |
Duration | 4 years |
Course Level | UG Degree |
Mode of Course | Full Time |
Average package | ₹ 3.33 Lakh |
Official Website | Go to Website  |
Seat breakup | 120 |
Type of University | Private |
B.E. in Mechanical Engineering at Fr. C. Rodrigues Institute of Technology Fees
B.E. in Mechanical Engineering
at Fr. C. Rodrigues Institute of Technology
The total tuition fee for Father Angel Engineering College Vashi B.E. in Mechanical Engineering is INR 6,22,612. Besides, the fee also includes other components, such as exam fee, caution deposit, enrollment fee, etc. Some of the fee components, such as caution deposit are one-time payable. Candidates after getting admission in B.E. in Mechanical Engineering need to pay the Father Angel Engineering College Vashi fee to confirm their seat in the institute. Below is fee breakup for Father Angel Engineering College Vashi B.E. in Mechanical Engineering:
| Fee components | Amount (4 years) |
|---|---|
Tuition fee is calculated on the basis of 1st year. Actual amount may vary.
The mentioned fees is as per AFRC Maharashtra. | ₹ 6.23 Lakh |
₹ 6.23 Lakh |
These are based on information available on various sources. Latest values may differ.View scholarships
B.E. in Mechanical Engineering at Fr. C. Rodrigues Institute of Technology Frequently Asked Questions
B.E. in Mechanical Engineering
at Fr. C. Rodrigues Institute of Technology
A
Anonymous
B.E. in Mechanical Engineering - Batch of 2027
4.8
4.0Placements5.0Infrastructure5.0Faculty5.0Crowd & Campus Life5.0Value for Money
Absolutely satisfied because of the attention we get from the tutors.
Placements: About 85% of students were placed on campus.
The highest package was 40 lac pa.
The lowest package was 14 lac pa.
Tata, Accenture, L&T, etc. are the top recruiters.
About 70% of the students got internship in companies like BMW, Triumph, and ISRO.
There are many roles offered to our college students, from the lowest to the highest.
Infrastructure: We have 100+ computers and we get the best practical knowledge on our campus. We also have a good canteen with reasonable rates of food and good quality too. We have lots of opportunities for sports and they also provide us with the best materials to study to the fullest and a disciplined library .
Faculty: All the teachers work hard and are helpful and all are Ph.D. holders; they excel in their subjects and give us the best. Yes, the curriculum is relevant and it helps us get industry-ready. The exams are a bit difficult as they expect students to give their best and achieve great heights and the passing percentage reaches up to 87%.
Other: I chose this course to serve in the Indian Defense Forces. More and more practical knowledge would help improve the course. They conduct two official events throughout the year and also conduct official ones.
Reviewed on 23 Dec 2023Read More
N
Natesh Shetty
B.E. in Mechanical Engineering - Batch of 2023
5.0
5.0Placements5.0Infrastructure5.0Faculty5.0Crowd & Campus Life5.0Value for Money
It is one of the best and top engineering colleges.
Placements: Almost 80% of the students get placed with the highest package of around 7-9 LPA, and the average package is 3.5 LPA. TCS is a mass recruiter along with other companies like L&T, Petrofac, Godrej and many more. It's good for students to get recruited for core jobs. Overall, the placements here are the best.
Infrastructure: Students get all the facilities, including A1 library, labs with a great inventory, and well-ventilated classrooms. Hostel students stay without any issue as they have home-like food in the mess and canteens, which are hygienic. Students with interest in sports and games get excellent exposure here.
Faculty: Faculty members are just awesome. Teachers with PhDs teach us. If any student faces any doubt and seeks help, they can get help from their respective subject teacher as the teachers are friendly and solve the doubts within time. Methods of teaching and their way of giving industry exposure to the students are excellent. So, the students get industry-ready.
Other: Mechanical is a course which covers almost all the sectors from my point of view. With covering a lot of fields such as marine, aero and many more, which is the best part. Along with curricular activities, there are fests, events, along with extracurricular activities which keep students enthusiastic. Overall, it's the best college anyone would be looking for.
Reviewed on 20 Feb 2021Read More
(1) 1 person found this helpfulJJ
Jassim Joy
B.E. in Mechanical Engineering - Batch of 2017
3.4
4.0Placements3.0Infrastructure3.0Faculty4.0Crowd & Campus Life3.0Value for Money
Review of FCRIT, VASHI from a mechanical engineer point of view.
Placements: Placement committee was organized and well coordinated. There was proper training given to student before the placement interview. All reputed companies related to field of engineering were invited to the campus. Entire placement process was smooth and knowledgeable.
Infrastructure: Good infrastructure including labs for conducting test. Proper facilitation of the interview process. Projector in labs to give demo about the companies. Rest rooms for the company employees to conduct the whole process efficiently. The test environment was well organized.
Faculty: Course is bit outdated not related to the current industry standards. The curriculum becomes redundant once the student gets passed out from the college. Less of industrial exposure and practical knowledge for the students. More of industrial visits must be organized.
Reviewed on 12 Apr 2019Read More
(1) 1 person found this helpfulJG
Joe nishit George
B.E. in Mechanical Engineering - Batch of 2020
3.0
2.0Placements5.0Infrastructure2.0Faculty4.0Crowd & Campus Life2.0Value for Money
The college is not suitable for the students who want to enjoy their college life.
Placements: Placements for the students of IT and computer science departments are very good. Most of the students get placed if they are serious about their career and want jobs. But, placements for the students of mechanical engineering are very poor as only 20 students out of 75 may get placed. The average salary package offered for the students of mechanical engineering is 2.5 LPA to 4 LPA. A placement cell is available in our college, and it is very active. Companies like TCS, Accenture, L&T, Capgemini, etc., visited our college for placements.
Infrastructure: The infrastructure of the new building is just phenomenal. Everything is excellent in the new building. Labs are good. Hostels are average as I heard from the students. Quality of food served is average, and it is not very expensive. The library is good, but mobiles are not allowed. Sports and games facilities are good.
Faculty: Faculty members in mechanical engineering are average while some professors are good at their job. Most of them are not good at teaching, and they make studies boring. College life here is boring. Teaching methods include projectors and audiovisual systems. The student to faculty ratio is excellent. Many teachers are available, but only a few are knowledgeable.
Other: Life is boring here as you need to go to college daily. Maintaining almost 75% of attendance is mandatory. Every month, they will analyse attendance and academic statistics of every student. If you fall short in any of these, they sign an undertaking form from you and your parents. They are not very understanding. Teachers love to harass students. Humanities department is the worst of all. We have an assembly every morning and late remarks for latecomers. Life becomes monotonous with too many rules and regulations. The college doesn't encourage creativity.
Reviewed on 4 Feb 2019Read More
(3) 3 people found this helpfulSP
Shamika Phatak
B.E. in Mechanical Engineering - Batch of 2018
3.0
3.0Placements3.0Infrastructure3.0Faculty3.0Crowd & Campus Life3.0Value for Money
This is a college that all the parents would love and not the students.
Placements: They promise placement to the ones who have a good pointer. Around 70% of the students who apply for placement actually get placed but hardly 30% of the students get placed in the high package companies. The average package for 2018 batch was hardly 3 lacs per annum. Also the maximum students were placed in an IT company which came as a mass recruiter. The senior batch had a better placement record in terms of the companies as well as that package. Max profiles offered were of marketing or sales department.
Infrastructure: The infrastructure was not that great in 2014 when our batch started. There was only one building wide enough of 4 floors which had engineering Diploma and MBA as well. The construction for the new building started in 2015 and by the end of 2017 the building was ready. The infrastructure is far better now. Food in the canteen is average. The girls hostel is a little over crowded as 16 ppl have to share one flat while 4 in one room. Sports and other related facilities are great. They have a different sports complex which is great.
Faculty: The teachers are quite qualified and they make it a point to complete the syllabus before time even if they have to call the students on their off day. Some teachers also ask the students to maintain a notebook and write in it everyday. It is also checked before the examinations. A lot of assignments and even tests are taken regularly.
Other: The fest are celebrated as a formality. Hardly any permissions are given. Too many rules and regulations. The campus crowd is mostly minority which is South indian.
Reviewed on 26 Sep 2018Read More
B.E. in Mechanical Engineering at Fr. C. Rodrigues Institute of Technology Students also asked
B.E. in Mechanical Engineering
at Fr. C. Rodrigues Institute of Technology
Download exam sample paper
JEE Main
JEE Main
Want to know more about Fr. C. Rodrigues Institute of Technology Scholarship details?
Read about Scholarship
B.E. in Mechanical Engineering at Fr. C. Rodrigues Institute of Technology Placements
B.E. in Mechanical Engineering
at Fr. C. Rodrigues Institute of Technology
| Particulars | Statistics (2023) |
|---|---|
| Average Salary | INR 3.33 Lakh |
| Highest Salary | INR 5.00 Lakh |
| Median Salary | INR 5.00 Lakh |
| % Batch placed | 67.4 |
Top Recruiters for Fr. C. Rodrigues Institute of TechnologyAtos
Bitwise
CapGemini
Directi
GODREJ
IBM
iGate
Indus Towers
Jacobs
JSW Steel
L T
MU Sigma
oberoi
Oracle
Panoramic Group
Persistent Ltd.
Petrofac
Quinnox
Reliance Digital
Reliance Jio
Siemens
Taj Group of Hotels
TATA Consultancy Services
TCS
Technip
Xoriant
Yodlee
Zycus
B.E. in Mechanical Engineering at Fr. C. Rodrigues Institute of Technology Entry Requirements
B.E. in Mechanical Engineering
at Fr. C. Rodrigues Institute of Technology
General
OBC
SC
ST
Requirements for 12th grade
- 45%
- Read more
Candidate must have passed / appearing 10+2 or HSC or equivalent examination with Physics and Mathematics as compulsory subjects along with one of the Chemistry or Biotechnology or Biology or Technical Vocational subject or Computer Science or Information Technology or Informatics Practices or Agriculture or Engineering Graphics or Business Studies and obtained at least mentioned marks in the above subjects taken together, from a recognized board. The mentioned OBC, SC, ST percentage is only applicable to candidates belonging to Maharashtra state.
Graduation
- 50%
- Candidates passed B.Sc. Degree from a UGC / Association of Indian Universities recognized University with mentioned marks (45.00 % marks in case of candidates of Backward class categories belonging only to Maharashtra State) are also eligible to apply.
MHT CET
JEE Main
Other eligibility criteria
Candidate who have passed Diploma in Engineering & Technology & obtained at least 45% marks (40% marks for Backward class, EWS & PWD candidates belonging to Maharashtra State only) can also apply.
Maharashtra State Candidates must have to appear MHT-CET (should have appeared in all the subjects in MHT-CET).
All India Candidates, Union Territory of Jammu and Kashmir and Union Territory of Ladakh Migrant Candidates need to appear JEE Mains/ MHT-CET exam. (In this case, Preference will be given to the candidates who have cleared JEE Mains over MHT-CET (should have appeared in all subjects))
Candidate should be an Indian National.
There is no age limit.
B.E. in Mechanical Engineering at Fr. C. Rodrigues Institute of Technology Admission Process
B.E. in Mechanical Engineering
at Fr. C. Rodrigues Institute of Technology
- CounsellingFor Maharashtra State candidates: Admission is through counselling based on the rank obtained in Maharashtra Common Entrance Test (MHT-CET). For other States and Jammu and Kashmir Migrant candidates: Admission is through counselling based on the rank obtained in JEE mains or Maharashtra Common Entrance Test (MHT-CET).
Important Dates
ALL
MHT CET
JEE MAIN
Jul 6, 2026
JEE Main counselling round 3 allotment
Jul 2 - 12, 2026
MHT CET 2026 CAP Registration
Jul 3 - 13, 2026
MHT CET 2026 CAP Document Verification
B.E. in Mechanical Engineering at Fr. C. Rodrigues Institute of Technology Cutoffs
B.E. in Mechanical Engineering
at Fr. C. Rodrigues Institute of Technology
3Gender
Quota
Category
JEE Main round-wise cutoff Rank: (General-All India)
| Round | 2023 | 2024 | 2025 |
|---|---|---|---|
| 1 | 136196 | 128536 | 115847 |
| 2 | 204108 | 129516 | 102517 |
| 3 | 182393 | - | 96159 |
| 4 | - | - | 84224 |
JEE Main round-wise cutoff Rank: (OBC-All India)
| Round | 2021 | 2022 | 2023 |
|---|---|---|---|
| 1 | 203355 | 297895 | 136196 |
| 2 | 276983 | 363766 | 204108 |
| 3 | - | - | 182393 |
MHT CET round-wise cutoff Rank: (General-All India)
| Round | 2019 | 2020 | 2021 |
|---|---|---|---|
| 1 | 87.28 | 68.47 | 12.23 |
| 2 | 86.62 | 56.29 | - |
MHT CET round-wise cutoff Rank: (General-Home State)
| Round | 2021 | 2022 | 2023 |
|---|---|---|---|
| 1 | 84.66 | 16.74 | 58.09 |
| 2 | 82.01 | 39.42 | 49.56 |
| 3 | - | 50.56 | 88.28 |
Explore Courses offered by Fr. C. Rodrigues Institute of Technology
Select the Degree you are Interested in
Select the Stream you are Interested in
Other courses offered by Fr. C. Rodrigues Institute of Technology
Get best suited colleges for you in real-time
Here’s how it works:
Share your preferences with our assistant
Tell us about your city, course, budget & more
Get recommendations in no time
Discover best colleges that meet all your needs
It won’t take more than a minute!
Read B.E. / B.Tech reviews from Fr. C. Rodrigues Institute of Technology
Read ReviewsCompare Courses From Similar Colleges
Similar courses in the same city
₹9.2 L
Overall Rating3.1
3.1₹17.5 L
Overall Rating4.4
4.4B.Tech. in Computer Engineering
Offered by Ramrao Adik Institute of Technology, Padmashree Dr. D.Y. Patil Vidyapeeth, Navi Mumbai₹22 L
Overall Rating4.2
4.2B.Tech. in Artificial Intelligence and Data Science
Offered by NMIMS Deemed to be University - Navi Mumbai Campus₹12 L
Overall Rating4.0
4.0₹4.91 L
Overall Rating3.6
3.6B.E. in Computer Science and Engineering (Artificial Intelligence and Machine Learning)
Offered by Saraswati College of Engineering₹3.4 L
Overall Rating4.1
4.1₹3.26 L
Overall Rating3.6
3.6₹5.24 L
Overall Rating3.7
3.7₹4.61 L
Overall Rating3.6
3.6
B.E. in Mechanical Engineering
at Fr. C. Rodrigues Institute of Technology
Student Forum
Anything you would want to ask experts?Answered 7 years ago
Hi,
You can read the reviews of the college here https://www.shiksha.com/college/fr-c-rodrigues-institute-of-technology-navi-mumbai-20016/reviews
A
Ananya Dev
Guide-Level 14
Content authored by:
Colleges in Navi MumbaiFr. C. Rodrigues Institute of TechnologyCoursesB.E. in Mechanical EngineeringB.E. in Mechanical Engineering at Fr. C. Rodrigues Institute of Technology News & Updates
B.E. in Mechanical Engineering
at Fr. C. Rodrigues Institute of Technology
Latest
Popular
Mamona Majumder · Jul 5, 2026
2.5L views
Samridhi Mishra · Jul 3, 2026
1.2L views
Samridhi Mishra · Jul 2, 2026
29.6K views
Mamona Majumder · Jun 30, 2026
16.1K views
B.E. in Mechanical Engineering at Fr. C. Rodrigues Institute of Technology Contact Information
B.E. in Mechanical Engineering
at Fr. C. Rodrigues Institute of Technology
Address
Agnel Technical Education Complex, Father Angnel Marg, Sector 9A, Vashi
Navi Mumbai ( Maharashtra)
Phone
Email
Go to College Website ->
Useful Links
Know more about Fr. C. Rodrigues Institute of Technology
- All About Fr. C. Rodrigues Institute of Technology
- Courses 2026
- Fees 2026
- Reviews on Placements, Faculty & Facilities
- Admission 2026 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Cut off & Merit List 2026
- Fr. C. Rodrigues Institute of Technology Rankings
- Gallery 2026
- Infrastructure Details & Reviews
- Fr. C. Rodrigues Institute of Technology Faculty
- Compare Fr. C. Rodrigues Institute of Technology
- Fr. C. Rodrigues Institute of Technology Q&A
- Scholarships
Know more about Programs
- Engineering
- Mechanical Engineering
- B Tech (Bachelor of Technology)
- Food Technology
- Instrumentation Technology
- BTech Chemical Engineering
- AI & ML Courses
- Aeronautical Engineering
- BTech Petroleum Engineering
- Petroleum Engineering
- VLSI Design
- MTech in Computer Science Engineering
- Metallurgical Engineering
- BTech Robotics Engineering
- BTech in Biotechnology Engineering
How is the teaching faculty and studies of this college for mechanical branch?