M.Tech Colleges in Delhi - 2026 Fees, Admission, Placements

The number of seats available for M.Tech specialisations at IIT Delhi is 1568. In the following table, specialisation-wise seat breakup is provided:

Courses	Seats
M.Tech. in Geotechnical and Geoenvironmental Engineering	44
M.Tech. in Rock Engineering and Underground Structures	44
M.Tech. in Structural Engineering	44
M.Tech. in Chemical Engineering	44
M.Tech. in Molecular Engineering (Chemical Synthesis and Analysis)	44

For admission to most of the undergraduate and postgraduate courses offered at Delhi Technological University, students need to score 50% to 60% minimum total in their last qualifying degree or course to be eligible. A course-wise list of eligibility criteria for DTU admission is mentioned in the table:

Course Name	Eligibility Criteria
BTech	Class 12 with 60%
BDes	A pass in Class 12
BBA	Class 12 with 50%
MSc	Class 12 with 50% in Economics
MTech	Relevant UG degree with at least 60%
MDes	4-year UG with 55%
E-MBA	Any UG degree with 60%
E-MBA	UG degree with 50%
MSc	Relevant BSc/ UG degree with 55%
E-MBA	UG degree with 50%
PhD	Relevant PG degree with 55%

 

Aspiring students are required to register on the official website of JMI and fill the application form online. In the form, fill all the details asked, upload the required documents and pay the application fee. BA, BSc and BVoc courses at JMI have also started accepting the scores of CUET UG. For the same, students need to register for the exam, appear for it and qualify it. Qualified students of CUET UG are required to register for JMI counselling after which merit lists will be released with the name of the shortlisted students. For the remaining courses, however, the university is still accepting national and university-level entrance exam for final selection. 

Yes, IIIT Delhi offers MTech across different specialisations. The two-year course is divided into four semesters. All the courses are credit-based programmes. Admission to the courses is entrance-based followed by an interview round. The accepted entrance examinations are GATE, PGCAT-IIITD, and GAT-B. IIITD offer MTech courses in the streams of Computer Science & Engineering, Computational Biology, and Electronics and Communications Engineering.

Netaji Subhas University of Technology (NSUT) cutoff 2026 has been released for BTech admission based on JEE Main ranks, followed by JAC Delhi counselling. If you belong to the General AI quota, check out the table below to view the cutoff details for Round 1. 

Specialisations	JEE Main Cutoff 2026
B.Tech. in Computer Science and Engineering (Artificial Intelligence)	2943
B.Tech. in Computer Engineering	3438
B.Tech. in Computer Science and Engineering (Data Science)	4440
B.Tech. in Information Technology	5230
B.Tech. in Mathematics and Computing	5715
B.Tech. in Information Technology (Network and Information Security)	5956
B.Tech. in Computer Science and Engineering (Big Data Analytics) (CSDA)	6140
B.Tech. in Electronics and Communication Engineering	7226
B.Tech. in Computer Science and Engineering (IOT)	7544
B.Tech. in Electronics and Communication Engineering (Artificial Intelligence and Machine Learning) (ECAM)	7575
B.Tech. in Electronics Engineering (VLSI Design & Technology)	7764
B.Tech. in Electrical Engineering	9879
B.Tech. in Instrumentation and Control Engineering	10633
B.Tech. in Mechanical Engineering	13069
B.Tech. in Mechanical Engineering (Electric Vehicles)	13992
B.Tech. in Biotechnology	16013
B.Tech. in Civil Engineering	16959
B.Tech. in Geoinformatics Engineering	17602

 

 

Yes, NIT Delhi does offer M.Tech courses for two years. The institute offers several specialisations in M.Tech courses, such as Mechanical Engineering, Electrical Engineering, Civil Engineering, etc. The eligibility criteria required for admissions to M.Tech courses are candidates must qualify for their bachelor's from a relevant stream such as MSc in Chemistry/ Physics/  Material and relevant disciplines for admissions to M.Tech in Industrial Chemistry, BE/ BTech/ BSc (Engineering)/ MCA/  MSc in Mathematics, Statistics, Computing for M.Tech in Mathematics Computing, etc. 

Yes, Guru Gobind Singh Indraprastha University conducts a Common Entrance Test (CET) for admission to BSc, BCA, BCom (Hons), B.Ed, BA (JMC), BHMCT, BBA, BA (Hons), BVoc, BPT, BPO, BOT, BASLP, BSc MLT, MSc, MA, MEd, MPT, MOT and MPO courses. IPU CET exam 2026 application forms for other courses, open tentatively in March every year. Apart from conducting IPU CET, GGSIPU also accepts several national-level entrance exams to provide admission to a few undergraduate, postgraduate and doctoral courses. 

IGDTUW cutoff 2026 has been released for BTech, Integrated BTech and BArch courses in the form of opening and closing ranks. During the IGDTUW Round 1 cutoff 2026, the maximum cutoff rank required for admission was 29113 for the Female category in the General AI quota. The cutoff rank required varies by each round and category. 

Yes, entrance tests are accepted for selection in Jamia Hamdard. The selection for admission in preferred programme is based on the merit and the candidate's performance in NEET, JEE Main, CAT, MAT, CMAT, CUET, etc.

JAC Delhi Counselling 2024 schedule is yet to be released by the Joint Admission Committee (JAC). It has been anticipated that JAC Delhi Counselling 2024  Online Registration and Choice Filling should commence in May 2024 and go upto till June 2024. To be conducted in five-six rounds like last year, Round 1 should release in June 2024, while Rounds 2, 3, 4 and 5 in July 2024. Also, JAC Delhi Spot Round (if applicable) should be out in August 2024. Once released, JAC Delhi Counselling 2024 schedule will be updated on this page.        

The courses at Jawaharlal Nehru University (JNU) that are under the Common Universities Entrance Test (CUET) include B.A. (Hons.) in various languages like Pashto, Persian, Arabic, Japanese, Korean, Chinese, French, German, Spanish, Russian, and other programs like B.Sc.-M.Sc. Integrated Programme in Ayurveda Biology and Certificate of Proficiency programs in different languages and subjects

It is possible that LPU Admission Office may not publicly post the cutoff data. Applicants have to login to their dashboard to check admission status. For MBA however, based on recent cutoff trends, 70 percentile is said to be an estimated cutoff. This is however, taken from sources on the internet and indicative. Students can connect with the admission desk to know more.

Candidates seeking admisison at DU for M.Tech are required to fill the common PG registration form of DU and then appear for the entrance test. Final admission will be subject to admission in the entrance and merit scores at the undergraduate level.

Yes, DIT University Admission Office is good for Engineering as it has been approved by the AICTE. The university mainly offers courses in the Engineering and Management fields. It has a group of experienced faculty members to provide education to students. 

Delhi Skill and Entrepreneurship University - Okhla II Campus offers Degree and Diploma courses including 3 UG and 1 PG courses. Additionally, it also has After 10th Diploma courses. These programs are offerred in Full Time mode. Delhi Skill and Entrepreneurship University - Okhla II Campus has specializations such as M.E./M.Tech specializations in Tool Engineering, B.Tech specializations in Mechanical Engineering, Mechatronics Engineering, After 10th Diploma specializations in Mechanical Engineering, UG Diploma specializations in Mechanical Engineering.

After completing MTech, a candidate can easily find a job in research and development companies, manufacturing firms, and IT companies as Project Manager, Research Associate, and Senior Engineers. Some of the candidates also prefer academic jobs such as teaching in a college or becoming a professor. Candidates can also work as Lead Scientist, Lead Engineer and also work as consultants in popular organisations.

Know more about -

MTech Courses

TERI University mostly encourages applications from students through online mode. However, one can also apply through offline mode which involves the following steps:

1. Downloading the application form from the TERI SAS website.
2. Filling out the application form.
3. Submission of the form by courier or registered post at the address mentioned on the official website.

For courses of interest, students are advised to check the University's website regularly to get acquainted with any admission procedure-related updates.