B.Tech Information Technology Colleges in Punjab

As per NIRF 2025 rankings, CU is ranked 31 under the 'Engineering' category and managed to improve its position from the last year's ranking, which was 32 in the year 2024. CU has set records for engineering education & is ranked among the Best Engineering Colleges in Punjab, India.

The students pursuing BTech from the university get excellent placement offers. The highest international and domestic packages offered during Chandigarh University placement 2025 was INR 170 LPA and INR 54.75 LPA, respectively. 

The total fee for BTech is INR 4.5 lakh -INR 16 lakh. The fee is calculated based on the semester fee.  Admission to BTech course is based on LPUNEST or CUET UG score. After completion of the selection rounds, shortlisted aspirants need to pay the course fee to confirm their admission. Candidates are first required to register with an application fee for LPUNEST. The exam fee for LPUNEST is INR 1,000 for males and INR 500 for females.

As per the latest report, NIT Jalandhar recorded 73.79% placement rate for the Class of 2023 till Mar 7, 2023. Earlier in 2022, the NIT Jalandhar recorded 81.76% placement rate in the academic year 2021-2022. Going back to 2021 placements, NIT Jalandhar recorded 81.76% placement 63.44% placements rate.

Some books I personally recommend for BTech Info Tech you should consider reading are here

Book Name	Author Name
Analog and Digital Communication	T. L. Singal
C Programming Language	Brian W.
Computer System Architecture	M. Mano
Digital Logic and Computer Design	M. Morris Mano
Introduction to the Theory of Computation	Michael Sipser
Database System Concepts	Abraham Silberschatz and S Sudarshan
Computer Networks	Andrew S. Tanenbaum
Software Engineering	Ian Sommerville

Note - The information is taken from external sites and may vary.

know more about -

BTech Course Syllabus

Courses offerred by Guru Nanak Dev Engineering College are approved by eminent Government bodies like AICTE. The combined seats available for courses offered at Guru Nanak Dev Engineering College goes up to 1375.

UIET Chandigarh B.E. in Computer Science and Engineering course is rated 3.8 out of 5 by 87 genuine verified students while Punjabi University Patiala same course is rated 3.8 out of 5 by 70 students . So UIET Chandigarh is better.

The institute has not released the placement report on the official website. The Swami Sarvanand Giri Regional Centre placement details given below are gathered from Shiksha's students review section: 

Both a B.Tech in Computer Science and Engineering and B.Tech in Artificial Intelligence and Machine Learning are valuable degrees with their own unique focuses.

Talking about placements the institute concluded its placement drive of 2023. As per report, the highest package offered during Gulzar Group Institutes placements 2023 stood at INR 15 LPA. Further, more than 2,500 placement offers were made by the popular companies such as Wipro, TCS, Infosys and many others.

However, the median package offered to B.Tech computer Science and engineering or B.Tech artificial intelligence and machine learning students stood at INR 2.21 LPA during 2023 placements.

In conclusion both the courses doesn't guarantee placement to a student and have a bad placement record, and choosing any one between the two courses will not have a change in your placements through gulzar group of institutes.

A placement department at Punjab's Desh Bhagat University aggressively seeks to place students in reputable Indian and international companies. Companies that have visited the institution for recruitment include Dell, Ericsson India Pvt Ltd, Hero Honda Motors, IBM, Infosys, and numerous others. It is notably said for the B.Tech Mechanical Engineering programme that graduates can find employment in a variety of industries, such as software and construction. The university's highest package ever recorded is really exceptional, suggesting that its students have excellent placement chances.

Amritsar Group of Colleges has been rated 3.8 on Infrastructure parameter. Institute has a well supported campus with facilities such as A/C ClassroomsAuditorium, Boys Hostel, Cafeteria, Co-ed Hostel, Convenience Store, Dance Room, Design Studio, Girls Hostel, Gym, Hospital / Medical Facilities, Hostel, Labs, Library, Mandatory Hostel, Moot Court (Law), Music Room, Shuttle Service, Sports Complex, Wi-Fi Campus. Amritsar Group of Colleges has also been rated 3.8 for Campuslife.

Beant College of Engineering and Technology has below criteria for taking admissions to it's various courses:

Courses	Eligibility
B.E. / B.Tech	Candidates must have passed the 10+2 exam from a board recognised or established by Central/State Government through a legislation with Physics, Mathematics & Chemistry/ Biotechnology/ Biology/ Computer Science/ Technical Vocational Subject/ Information Technology/ informatics Practices/ Agriculture/ Engineering Graphics/ Business Studies & obtained the above mentioned percentage (40% in case of candidate belonging to reserved category) in the above subjects taken together. OR Candidates who have passed Diploma in any Engg. Trade from (PSBTE & IT) or Sant Longowal Institute of Engineering & Technology, Longowal, or any such examination from any other recognised State Board of Technical Education shall be eligible with the above mentioned percentage (40% in case of candidate belonging to reserved category). OR Candidates who have passed 2 years certificate course from Sant Longowal Institute of Engineering and Technology, Longowal shall be eligible.
M.E./M.Tech	Candidates must have passed B.E./ B.Tech. in relevant stream with atleast 50% (45% in case of candidate belonging to reserved category) marks in aggregate. In case seats haven't been filled under respective categories, admission shall be considered on the basis of Inter-se-merit in the qualifying examination. A valid GATE Score would be preferred but not mandatory for admission.
After 10th Diploma	Candidate must have passed 10th standard/SSC examination from any recognised board/council.

Courses offerred by Global Institutes are approved by eminent Government bodies like AICTE. The combined seats available for courses offered at Global Institutes goes up to 924.

Baba Banda Singh Bahadur Engineering College has below criteria for taking admissions to it's various courses:

Courses	Eligibility
B.E. / B.Tech	Candidate must have Diploma from a recognised college/ university.
B.Voc	Candidate must have passed 10+2 or equivalent from recognised board
M.E./M.Tech	Candidates must have passed B.E./ B.Tech. in relevant stream with atleast 50% (45% in case of candidate belonging to reserved category) marks in aggregate. In case seats haven't been filled under respective categories, admission shall be considered on the basis of Inter-se-merit in the qualifying examination. A valid GATE Score would be preferred but not mandatory for admission.
MBA/PGDM	Candidates must have passed Bachelors Degree of minimum three year duration in any discipline from the University recognised by the University Grants Commission (UGC). In case seats haven't been filled under respective categories, admission shall be considered on the basis of Inter-se-merit in the qualifying examination.

Sri Sai Group of Institutes, Badhani is a reputed institute for B.Sc., Certificate, UG Diploma, B.Com, B.Ed, M.Ed, B.Tech, BBA, BCA, M.Pharma, M.Sc., M.E./M.Tech, B.Arch, MBA/PGDM, MCA. Students can opt these programs to pursue their career in Hospitality & Travel, Teaching & Education, Engineering, Accounting & Commerce, Science, IT & Software, Business & Management Studies, Medicine & Health Sciences, Architecture & Planning. Institute has trained & experienced faculty who deliver these programs. Sri Sai Group of Institutes, Badhani has a review rating of 3.6 on the basis of reviews by students. In addition to this, it has been rated 3.7 on campuslife, 2.8 on placements, 3.8 on faculty and 3.7 on Infrastructure.

The BTech Mechanical Engineering syllabus is not the same across all colleges, as every college committee sets a particular coursework pattern at the start of every academic year to be followed for the respective batch. The syllabus includes some core subjects, interesting electives, and lab work that gives detailed knowledge to the students about the workings of the field. 

Rayat Bahra is a University that offers various UG and PG cours. It offer a wide range of courses including UG programmes, and PG programmes. The institute offer more than 20 courses like BTech, MBA, MTech, and BVoc. The best  course varies with the interests of each candidate, and the choice is very subjective. For a candidate wishing to build a career in Engineering, the BTech course would be the best choice. Meanwhile, someone who wishes to build a career in Management, the MBA course would be the best for them. 

The BTech Mechanical Engineering syllabus is not the same across all colleges, as every college committee sets a particular coursework pattern at the start of every academic year to be followed for the respective batch. The syllabus includes some core subjects, interesting electives, and lab work that gives detailed knowledge to the students about the workings of the field. 

Dear candidate, the subject of Machine Design basically teaches you about the designing fundamentals of various types of machinery across industries. You get to learn about the different ways in which elements can be combined to form an equipment or machine system and get the work done in an effective manner.

The knowledge of this subject is very important for a mechanical engineer as he/she will have to put this to use in the future whenever they enter the workforce as a mechanical engineering professional.

Hope this cleared your doubt. Have a good day.

The fee bracket for programs offerred by the Amritsar College of Engineering and Technology is approximately INR 46000 - INR 240000.

The BTech Mechanical Engineering syllabus is not the same across all colleges, as every college committee sets a particular coursework pattern at the start of every academic year to be followed for the respective batch. The syllabus includes some core subjects, interesting electives, and lab work that gives detailed knowledge to the students about the workings of the field. 

The BTech Mechanical Engineering syllabus is not the same across all colleges, as every college committee sets a particular coursework pattern at the start of every academic year to be followed for the respective batch. The syllabus includes some core subjects, interesting electives, and lab work that gives detailed knowledge to the students about the workings of the field. 

The BTech Mechanical Engineering syllabus is not the same across all colleges, as every college committee sets a particular coursework pattern at the start of every academic year to be followed for the respective batch. The syllabus includes some core subjects, interesting electives, and lab work that gives detailed knowledge to the students about the workings of the field.