B.Tech Information Technology Colleges in Punjab

As per NIRF 2025 rankings, CU is ranked 31 under the 'Engineering' category and managed to improve its position from the last year's ranking, which was 32 in the year 2024. CU has set records for engineering education & is ranked among the Best Engineering Colleges in Punjab, India.

The students pursuing BTech from the university get excellent placement offers. The highest international and domestic packages offered during Chandigarh University placement 2025 was INR 170 LPA and INR 54.75 LPA, respectively. 

The total fee for BTech range from INR 4.5 lakh -INR 36 lakh. The fee is calculated based on the semester fee.  Admission to BTech course is based on LPUNEST or CUET UG score. After completion of the selection rounds, shortlisted aspirants need to pay the course fee to confirm their admission. Candidates are first required to register with an application fee for LPUNEST. The exam fee for LPUNEST is INR 1,000 for males and INR 500 for females.

The filling-in of choices on the online portal is free of cost. The candidate must pay the seat acceptance fee before continuing with the JoSAA process till the end to avail the seat in an IIT or NIT. The documents uploaded by the candidate will not be verified unless the candidate pays the seat acceptance fee. General/Open category candidates are required to pay a fee of INR 35,000, whereas SC, Gen-PwD, ST, OBC-NCL-PwD, ST-PwD, and SC-PwD have to pay INR 17,500. The fees will be included in the semester fees once students confirm their admission.

Some books I personally recommend for BTech Info Tech you should consider reading are here

Book Name	Author Name
Analog and Digital Communication	T. L. Singal
C Programming Language	Brian W.
Computer System Architecture	M. Mano
Digital Logic and Computer Design	M. Morris Mano
Introduction to the Theory of Computation	Michael Sipser
Database System Concepts	Abraham Silberschatz and S Sudarshan
Computer Networks	Andrew S. Tanenbaum
Software Engineering	Ian Sommerville

Note - The information is taken from external sites and may vary.

know more about -

BTech Course Syllabus

Courses offerred by Guru Nanak Dev Engineering College are approved by eminent Government bodies like AICTE. The combined seats available for courses offered at Guru Nanak Dev Engineering College goes up to 1375.

The placement statistics are on an ever rising curve at UIET Chandigarh, with the total number of offers and average package increasing with each year. Since the university has a good name, there is high value to the students applying off-campus as well. 

The highest package in 2022-23 :  INR 45 LPA by Amazon (on campus)

Average CTC : INR 8.72 LPA

Many top companies, such as Amazon, Deloitte, Samsung, and many more come to UIET for placement drives.

The highest package offered during the Swami Sarvanand Giri Regional Centre placements 2025 was INR 25 LPA. Refer to the table to know the same: 

Both a B.Tech in Computer Science and Engineering and B.Tech in Artificial Intelligence and Machine Learning are valuable degrees with their own unique focuses.

Talking about placements the institute concluded its placement drive of 2023. As per report, the highest package offered during Gulzar Group Institutes placements 2023 stood at INR 15 LPA. Further, more than 2,500 placement offers were made by the popular companies such as Wipro, TCS, Infosys and many others.

However, the median package offered to B.Tech computer Science and engineering or B.Tech artificial intelligence and machine learning students stood at INR 2.21 LPA during 2023 placements.

In conclusion both the courses doesn't guarantee placement to a student and have a bad placement record, and choosing any one between the two courses will not have a change in your placements through gulzar group of institutes.

Desh Bhagat University, Punjab, is famous for its B.Tech. CSE course. The university's total tuition fee is around 1.8L to 3.2L, with the median package provided at 3.2L for the students. Students can go to this page to know what other students have to say about the course and the university.

Amritsar Group of Colleges has courses such as UG Diploma, MCA, B.A., B.Tech, BBA, B.Com, BCA, D.Pharma, B.Com LL.B, LL.B., B.A. LL.B., B.Sc., B.Pharma, M.E./M.Tech, MBA/PGDM which are primarily in the stream of IT & Software, Mass Communication & Media, Engineering, Business & Management Studies, Accounting & Commerce, Medicine & Health Sciences, Law, Science, Hospitality & Travel, Design. Amritsar Group of Colleges has specializations such as B.Tech specializations in Civil Engineering, Computer Science Engineering, Electrical Engineering, Electronics & Communication Engineering, Information Technology, Mechanical Engineering, Artificial Intelligence & Machine Learning, B.Sc. specializations in Agriculture, Fashion Design, M.E./M.Tech specializations in Civil Engineering, Computer Science Engineering, Mechanical Engineering, Electronics & Communication Engineering and MBA/PGDM specializations in Sales & Marketing.

Beant College of Engineering and Technology has below criteria for taking admissions to it's various courses:

Courses	Eligibility
B.E. / B.Tech	Candidates must have passed the 10+2 exam from a board recognised or established by Central/State Government through a legislation with Physics, Mathematics & Chemistry/ Biotechnology/ Biology/ Computer Science/ Technical Vocational Subject/ Information Technology/ informatics Practices/ Agriculture/ Engineering Graphics/ Business Studies & obtained the above mentioned percentage (40% in case of candidate belonging to reserved category) in the above subjects taken together. OR Candidates who have passed Diploma in any Engg. Trade from (PSBTE & IT) or Sant Longowal Institute of Engineering & Technology, Longowal, or any such examination from any other recognised State Board of Technical Education shall be eligible with the above mentioned percentage (40% in case of candidate belonging to reserved category). OR Candidates who have passed 2 years certificate course from Sant Longowal Institute of Engineering and Technology, Longowal shall be eligible.
M.E./M.Tech	Candidates must have passed B.E./ B.Tech. in relevant stream with atleast 50% (45% in case of candidate belonging to reserved category) marks in aggregate. In case seats haven't been filled under respective categories, admission shall be considered on the basis of Inter-se-merit in the qualifying examination. A valid GATE Score would be preferred but not mandatory for admission.
After 10th Diploma	Candidate must have passed 10th standard/SSC examination from any recognised board/council.

At Global Institutes, candidates for all UG & PG courses are offered direct admissions based on the merit obtained in the last qualifying exam. However, the institute accepts LEET exam scores for candidates who wish to take admission to BTech (Lateral Entry) course. There are 20% of the total seats filled for BTech (LE) applicants. Click here to know about the LEET exam in detail.

Baba Banda Singh Bahadur Engineering College offers Degree courses including 10 UG and 7 PG courses. These programs are offerred in Full Time mode. Baba Banda Singh Bahadur Engineering College has specializations such as B.Tech specializations in Civil Engineering, Information Technology, Agriculture & Farm Engineering, Computer Science Engineering, Electrical Engineering, Electronics & Communication Engineering, Mechanical Engineering, M.E./M.Tech specializations in Mechanical Engineering, Computer Science Engineering, Power Engineering, Electronics & Communication Engineering.

The BTech Mechanical Engineering syllabus is not the same across all colleges, as every college committee sets a particular coursework pattern at the start of every academic year to be followed for the respective batch. The syllabus includes some core subjects, interesting electives, and lab work that gives detailed knowledge to the students about the workings of the field. 

Rayat Bahra is a University that offers various UG and PG cours. It offer a wide range of courses including UG programmes, and PG programmes. The institute offer more than 20 courses like BTech, MBA, MTech, and BVoc. The best  course varies with the interests of each candidate, and the choice is very subjective. For a candidate wishing to build a career in Engineering, the BTech course would be the best choice. Meanwhile, someone who wishes to build a career in Management, the MBA course would be the best for them. 

Sri Sai Group of Institutes, Badhani has been rated 3.8 for faculty as per reviews by students. This represents that Institute has decent, qualified and experienced faculty members.

The BTech Mechanical Engineering syllabus is not the same across all colleges, as every college committee sets a particular coursework pattern at the start of every academic year to be followed for the respective batch. The syllabus includes some core subjects, interesting electives, and lab work that gives detailed knowledge to the students about the workings of the field. 

The fee bracket for programs offerred by the Amritsar College of Engineering and Technology is approximately INR 46000 - INR 240000.

Dear candidate, the subject of Machine Design basically teaches you about the designing fundamentals of various types of machinery across industries. You get to learn about the different ways in which elements can be combined to form an equipment or machine system and get the work done in an effective manner.

The knowledge of this subject is very important for a mechanical engineer as he/she will have to put this to use in the future whenever they enter the workforce as a mechanical engineering professional.

Hope this cleared your doubt. Have a good day.

The average BTech CSE salary for graduates in India can range between INR 4 LPA and INR 12 LPA. The scope of the BTech CSE programme in India is excellent and hence the starting salary packages offered by recruiters are also high as compared to some other engineering courses.

The salary depends on factors like the years of experience you hold, your academic qualification, skill set, etc. Once you enter the industry and get some years of experience in hand, you will get a higher salary package. But, in the starting of your career journey, you can expect between INR 4 LPA and INR 6 LPA.

The BTech Mechanical Engineering syllabus is not the same across all colleges, as every college committee sets a particular coursework pattern at the start of every academic year to be followed for the respective batch. The syllabus includes some core subjects, interesting electives, and lab work that gives detailed knowledge to the students about the workings of the field. 

The BTech Mechanical Engineering syllabus is not the same across all colleges, as every college committee sets a particular coursework pattern at the start of every academic year to be followed for the respective batch. The syllabus includes some core subjects, interesting electives, and lab work that gives detailed knowledge to the students about the workings of the field. 

The BTech Mechanical Engineering syllabus is not the same across all colleges, as every college committee sets a particular coursework pattern at the start of every academic year to be followed for the respective batch. The syllabus includes some core subjects, interesting electives, and lab work that gives detailed knowledge to the students about the workings of the field.