IIT Dhanbad Cutoff 2025: Check Category-wise JEE Advanced Cutoff Ranks

Rashmi
Rashmi Sinha
Senior Executive
7 mins readUpdated on Feb 13, 2026 16:22 IST
IIT Dhanbad JEE Advanced cutoff 2025 was released for BTech and Integrated BTech courses. For BTech admission, the JEE Advanced last round closing ranks ranged between 3585 and 16752, with Computer Science and Engineering being the most competitive for admission.

IIT Dhanbad JEE Advanced cutoff 2025 was concluded with the release of six rounds of seat allotments for admission to various undergraduate courses. The cutoff was released as opening and closing ranks for categories belonging to the AI quota. For BTech admission, the JEE Advanced last round closing ranks ranged between 3585 and 16752, with Computer Science and Engineering being the most competitive for admission. The cutoff ranks vary by rounds and categories. Read this article to learn more about the IIT ISM Dhanbad category-wise cutoff 2025. 

IIT Dhanbad Cutoff 2026

IIT Dhanbad Cutoff 2024

Table of contents
  • IIT Dhanbad Cutoff 2025 For General All India Category
  • IIT Dhanbad Cutoff 2025 For OBC All India Category
  • IIT Dhanbad Cutoff 2025 For SC All India Category
  • IIT Dhanbad Cutoff 2025 For ST All India Category
  • IIT Dhanbad Cutoff 2025 For EWS All India Category
  • IIT Dhanbad Cutoff 2025 For PWD All India Category

IIT Dhanbad Cutoff 2025 For General All India Category

For the students belonging to the General AI quota, the cutoff ranks were released for BTech and Integrated BTech courses at the undergraduate level. For BTech, the top two most competitive branches for admission were CSE and Mathematics and Computing. The maximum JEE Advanced cutoff rank required for CSE admission was 3585. This means a lower cutoff rank than this will confirm your admission to the CSE branch at IIT Dhanbad. On the otherhand, the easy-to-grab specialisations for admission include Electronics and Communication Engineering, followed by Electrical Engineering and Mechanical Engineering. 

For admission to the Integrated courses, the JEE Advanced last round closing ranks were in the range of 16770 and 18368, wherein the top two most competitive courses were Integrated B.Tech Mining Engineering + MBA in Logistics and Supply Chain Management (IIM Mumbai) and Integrated M.Tech. in Applied Geology. More cutoff-related details are tabulated below: 

Course

Round 1 (Closing Rank)

Last Round (Closing Rank)

B.Tech. in Computer Science and Engineering

3348

3585

B.Tech. in Mathematics and Computing

4010

4335

B.Tech. in Electronics and Communication Engineering

5556

5839

B.Tech. in Electrical Engineering

6854

7603

B.Tech. in Mechanical Engineering

9340

10273

B.Tech. in Engineering Physics

9826

11711

B.Tech. in Chemical Engineering

10549

11980

B.Tech. in Petroleum Engineering

11668

12709

B.Tech. in Civil Engineering

12350

13778

B.Tech. in Mineral and Metallurgical Engineering

12734

14875

B.Tech. in Mining Engineering

13755

15455

B.Tech. in Mining Machinery Engineering

14255

16579

B.Tech. in Environmental Engineering

14229

16752

Integrated B.Tech Mining Engineering + MBA in Logistics and Supply Chain Management (IIM Mumbai)

14510

16770

Integrated M.Tech. in Applied Geophysics

14718

17507

Integrated M.Tech. in Applied Geology

14937

17892

Integrated B.Sc. + M.Sc in Chemical Science

15969

18334

Integrated B.Sc. + M.Sc in Physical Science

15665

18368

Q&A Icon
Commonly asked questions
Q:   How much rank should I score to get IIT Dhanbad?
A: 

To get admission to IIT Dhanbad, students must secure a rank as per the cutoff list and according to the category they belong to to avail admission at this institiute. IIT Dhandbad JEE Advanced cutoff 2025 for the General AI category candidates was released for all rounds and courses. 

 As per the cutoff ranks for the General AI category candidates, the overall closing cutoff varied between 3348 for BTech (CSE) and 18368 for Integrated BSc + MSc in Physical Science. Therefore, students seeking admission to the college must have a JEE Advanced rank of at least 18368 or preferably below, if belonging to the All India category. 

Note:The cutoff for other categories, rounds., etc., will diffrer. 

Q:   Is the eligibility criteria for BTech dual degree courses at IIT Dhanbad different?
A: 

No, the eligibility criteria for BTech dual degree courses at IIT Dhanbad is the same as regular BTech admissions.

Candidates are required to clear Class 12 board exams with Physics, Chemistry and Mathematics as mandatory subjects and score an aggregate higher or equal to 75% to qualify for the Dual Degree BTech courses.

Q:   How much should one score to get into IIT Dhanbad through JEE Advanced for ECE?
A: 

To get into ECE at IIT Dhanbad through JEE Advanced exam, candidate must obtain the neccessary rank as per the category they belong to. IIT Dhanbad JEE Advanced cutoff 2024 for the General AI category candidates in the last round was 5982. Notably, ECE was one of the highly competitive specialisations at IIT Dhanbad. For last round closing cutoff ranks for ECE for other reserved and unreserved categories, refer to the table below:

Category (All India quota)Last Round Closing Rank
General5982
OBC2102
SC1214
ST673
EWS880

 

Q:   What is the entrance exam for PhD in IIT Dhanbad?
A: 

IIT Dhanbad accepts national-level entrance exams like GATEUGC NET for providing admission to PhD course. Candidates shortlisted based on the entrance exam score are further called for a personal interview round. Besides, candidates need to pass UG degree with a minimum of 70% aggregate or 7.0 CGPA or Postgraduate with 60% aggregate or 6.0 CGPA in Engineering / Science or any allied area for PhD admission. After selection, aspirants need to come for counselling and document verification. 

IIT Dhanbad Cutoff 2025 For OBC All India Category

Compared with the General AI category students, the JEE Advanced cutoff ranks were comparatively more stringent for admission to CSE, Mathematics & Computing, among other specialisations. For admission to Computer Science and Engineering and Mathematics and Computing, the JEE Advanced last round closing ranks were 1311 and 1628, respectively. 

Considering the last round cutoff 2025, the most and least competitive BTech branches were CSE and Environmental Engineering, respectively. In the last round, the JEE Advanced closing rank for CSE was 1311, while for Environmental Engineering, the cutoff rank concluded at 5742. Further details are given below: 

Course

Round 1 (Closing Rank)

Last Round (Closing Rank)

B.Tech. in Environmental Engineering

5408

5742

B.Tech. in Petroleum Engineering

4530

4717

B.Tech. in Electrical Engineering

2583

2771

B.Tech. in Computer Science and Engineering

1228

1311

B.Tech. in Mechanical Engineering

3459

3743

B.Tech. in Mining Engineering

5052

5419

B.Tech. in Chemical Engineering

3701

4339

B.Tech. in Civil Engineering

4376

4638

B.Tech. in Electronics and Communication Engineering

2036

2072

B.Tech. in Mining Machinery Engineering

5299

5725

B.Tech. in Engineering Physics

4146

4405

Integrated M.Tech. in Applied Geophysics

5546

6145

B.Tech. in Mineral and Metallurgical Engineering

5035

5301

Integrated M.Tech. in Applied Geology

5627

6098

B.Tech. in Mathematics and Computing

1566

1628

Integrated B.Tech Mining Engineering + MBA in Logistics and Supply Chain Management (IIM Mumbai)

5572

6033

Integrated B.Sc. + M.Sc in Physical Science

5856

6413

Integrated B.Sc. + M.Sc in Chemical Science

5768

6289

Staying updated about the latest educational events is just a click away
Enter Mobile Number

IIT Dhanbad Cutoff 2025 For SC All India Category

Candidates can refer to the table below to view the JEE Advanced first, and last-round closing ranks for admission to the BTech and Integrated BTech courses. The cutoff ranks were released based on candidates' performance in the entrance exam, followed by the JoSAA counselling process. IIT Dhanbad CSE cutoff 2025 was 686 in the first round, while in the last round, the closing rank stood at 708. For B.Tech. in Electronics and Communication Engineering, the cutoff closed at 1337. More cutoff-related details for other courses and specialisations are provided in the table below:

Course

Round 1 (Closing Rank)

Last Round (Closing Rank)

B.Tech. in Environmental Engineering

2962

3244

B.Tech. in Petroleum Engineering

2624

2624

B.Tech. in Electrical Engineering

1624

1757

B.Tech. in Computer Science and Engineering

686

708

B.Tech. in Mechanical Engineering

2069

2227

B.Tech. in Mining Engineering

2795

3089

B.Tech. in Chemical Engineering

2202

2456

B.Tech. in Civil Engineering

2356

2573

B.Tech. in Electronics and Communication Engineering

1256

1337

B.Tech. in Mining Machinery Engineering

2990

3167

B.Tech. in Engineering Physics

2537

2850

Integrated M.Tech. in Applied Geophysics

3030

3222

B.Tech. in Mineral and Metallurgical Engineering

2630

2877

Integrated M.Tech. in Applied Geology

2876

3361

B.Tech. in Mathematics and Computing

988

1074

Integrated B.Tech Mining Engineering + MBA in Logistics and Supply Chain Management (IIM Mumbai)

3110

3323

Integrated B.Sc. + M.Sc in Physical Science

3176

3423

Integrated B.Sc. + M.Sc in Chemical Science

3156

3364

Q&A Icon
Commonly asked questions
Q:   What is the JEE Main 2026 exam date for Session 2 ?
A: 

JEE Main 2026 Session 2 exam takes place in the month of April every year. Whereas, the application form for Session 2 will be available on the JEE Mains website. The exam is conducted by NTA.

Q:   What is the qualification for BTech in IIT Dhanbad?
A: 

Candidates seeking admission to IIT Dhanbad BTech must appear for JEE Mains followed by JEE Advance examination. To be eligible for IIT Dhanbad BTech candidates are required to meet the eligibility criteria for JEE Mains. 

Find below the JEE Main and JEE Advance eligibility criteria for admission to IIT Dhanbad BTech:

Entrance ExaminationEligibility
JEE Main 2024

Passed class 12 in 2022/2023 or appearing in 2024 from any recognised board with a minimum 75% marks and Physics, Mathematics, and any one subject among Chemistry/Biology/Biotechnology/Technical Vocational Subject as compulsory subject.

Candidates having passed any exam equivalent to class 12 are also eligible to apply 

JEE Advance 2024

Candidates should be among the top 2,50,000 successful candidates (including all categories) in BE/BTech Paper of JEE (Main) 2024.

Candidates should have been born on or after October 1, 1999. Five years of age relaxation is given to SC, ST, and PwD candidates, i.e. these candidates should have been born on or after October 1, 1994.

 

Q:   What is the cutoff for BTech at IIT Dhanbad (ISM) for other than general categories?
A: 

IIT Dhanbad cutoff 2023 ranks for BTech in Computer Science and Engineering other than General category are mentioned below

  • 1190 for OBC
  • 712 for SC
  • 243 for ST
  • 466 for EWS
  • 109 for PWD

While the admissions are based on the scores/rank obtained in JEE Advanced, the last cut offs also change a lot depending on All India quota or Home State. It also varies if the applicant is a female.

Q:   What is the cutoff for BTech in Electrical Engineering at IIT Dhanbad for other than general categories?
A: 

IIT Dhanbad cutoff 2023 ranks for BTech in Electrical Engineering other than General category are mentioned below:

  • 2938 for OBC
  • 1589 for SC
  • 638 for ST
  • 136 for EWS

 While the admissions are based on the scores/rank obtained in JEE Advanced, the last cut offs also change a lot depending on All India quota or Home State. It also varies if the applicant is a female.

IIT Dhanbad Cutoff 2025 For ST All India Category

Tabulated below is the IIT Dhanbad BTech cutoff 2025 for the students belonging to the ST category. During the last round of JEE Advanced, the closing ranks varied between 318 and 1563, with CSE turned out to be the most challenging for admission, considering its competitive rank. The second most difficult specialisation within the BTech course was Electronics and Communication Engineering, with JEE Advanced first and last round closing ranks of 525 and 576, respectively. Check out the table below to view the cutoff details of all the courses and specialisations offered for admission at the Indian Institute of Technology (Indian School of Mines), Dhanbad.

Course

Round 1 (Closing Rank)

Last Round (Closing Rank)

B.Tech. in Environmental Engineering

1409

1502

B.Tech. in Petroleum Engineering

1122

1122

B.Tech. in Electrical Engineering

770

778

B.Tech. in Computer Science and Engineering

287

318

B.Tech. in Mechanical Engineering

954

1023

B.Tech. in Mining Engineering

1238

1255

B.Tech. in Chemical Engineering

1159

1189

B.Tech. in Civil Engineering

965

1017

B.Tech. in Electronics and Communication Engineering

525

576

B.Tech. in Mining Machinery Engineering

1301

1301

B.Tech. in Engineering Physics

1338

1422

Integrated M.Tech. in Applied Geophysics

1439

1507

B.Tech. in Mineral and Metallurgical Engineering

1315

1354

Integrated M.Tech. in Applied Geology

1455

1508

B.Tech. in Mathematics and Computing

535

621

Integrated B.Tech Mining Engineering + MBA in Logistics and Supply Chain Management (IIM Mumbai)

1433

1541

Integrated B.Sc. + M.Sc in Physical Science

1492

1560

Integrated B.Sc. + M.Sc in Chemical Science

1468

1563

IIT Dhanbad Cutoff 2025 For EWS All India Category

In the EWS category, the cutoff was released for BTech course across multiple specialisations. For students seeking admission to core BTech branches, such as CSE, ECE, Electrical, etc., the cutoff ranks were highly competitive for admission as compared to other branches, such as Mining Engineering and Chemical Engineering, etc. Candidates aimed for CSE; the maximum cutoff rank required for admission was 458. Similarly, for Electronics and Communication Engineering, the JEE Advanced first and last round closing ranks were 762 and 781, respectively. 

For Chemical and Mining Engineering, the JEE Advanced last round closing ranks for admission were 1709 and 2302, respectively. For other courses and specialisations, check out the table given below: 

Course

Round 1 (Closing Rank)

Last Round (Closing Rank)

B.Tech. in Environmental Engineering

2108

2396

B.Tech. in Petroleum Engineering

1647

1904

B.Tech. in Electrical Engineering

919

1121

B.Tech. in Computer Science and Engineering

445

458

B.Tech. in Mechanical Engineering

1433

1606

B.Tech. in Mining Engineering

1939

2302

B.Tech. in Chemical Engineering

1578

1709

B.Tech. in Civil Engineering

1742

2078

B.Tech. in Electronics and Communication Engineering

762

781

B.Tech. in Mining Machinery Engineering

2149

2467

B.Tech. in Engineering Physics

1500

1708

Integrated M.Tech. in Applied Geophysics

2194

2690

B.Tech. in Mineral and Metallurgical Engineering

1883

2148

Integrated M.Tech. in Applied Geology

2240

2658

B.Tech. in Mathematics and Computing

566

566

Integrated B.Tech Mining Engineering + MBA in Logistics and Supply Chain Management (IIM Mumbai)

2215

2600

Integrated B.Sc. + M.Sc in Physical Science

2370

2625

Integrated B.Sc. + M.Sc in Chemical Science

2335

2649

Q&A Icon
Commonly asked questions
Q:   Who is eligible for IIT Dhanbad MBA?
A: 

To be eligible for the IIT Dhanbad MBA course, a candidate needs to graduate in any discipline from any recognised University. Further, students shall have the relevant documents as proof of eligibility with them as well. Check below MBA course-wise eligibility:

CourseIIT Dhanbad Eligibility
MBA

Graduates in any discipline with first class or having 60% aggregate or CGPA of 6.0 out of 10 (55% aggregate or 5.5 for SC/ ST/ PwD-Differently Abled Categories) with Mathematics/ Statistics as one of the subjects

Final-year students are also eligible

MBA Business AnalyticsBTech degree in any discipline with 60% aggregate or CGPA of 6.0 out of 10 (55% aggregate or 5.5 for SC/ ST/ PwD-Differently Abled Categories)

Final-year students are also eligible

Q:   What is IIT Dhanbad CAT cutoff for MBA admissions?
A: 

IIT Dhanbad CAT cutoff 2025 is released for admission to the MBA course for various All India categories. The actual cutoff is only visible to the candidates with login access. 

But, based on the closest estimated CAT cutoff percentile for the General AI category, a percentile of at least 80 is needed for admission. Candidates with this percentile are eligible to move to the second part of the admission process, which involves GD (Group Discussion) and PI (Personal Interview). 

Q:   What is the IIT Dhanbad GATE COAP Cutoff?
A: 

IIT Dhanbad GATE COAP cutoff 2025 has been released for Round 1. If you belong to the General AI category, the cutoff scores ranged from 456 to 762 for MTech admission across multiple specialisations. Check out the table below to view the GATE COAP cutoff 2026 for the General AI category candidates. 

Course

2026 (Round 1)

M.Tech. in Earthquake Science and Engineering

456

M.Tech. in Water Resources Engineering

465

M.Tech. in Mechanical Engineering with Spl in Manufacturing Engineering

478

M.Tech. in Fuel Mineral and Metallurgical Engineering

485

M.Tech. in Metallurgical Engineering

488

M.Tech. in Material Science and Technology

488

M.Tech. in Chemical Engineering

489

M.Tech. in Geotechnical Engineering

500

M.Tech. in Pharmaceutical Science and Engineering

512

M.Tech. in Tunnelling and Underground Space Technology

518

M.Tech. in Transportation Engineering

532

M.Tech. in Mineral Engineering

537

M.Tech. in Environmental Science and Engineering

541

M.Tech. in Petroleum Engineering

542

M.Tech. in Structural Engineering

569

M.Tech. in Mechanical Engineering (Machine Design)

571

M.Tech. in Mechanical Engineering with Spl in Thermal Engineering

571

M.Tech. in Power System Engineering

572

M.Tech. in Mining of Critical Minerals

573

M.Tech. in Data Analytics

587

M.Tech. in Geomatics

593

M.Tech. in Electronics Engineering (Optical Communication & Integrated Photonics) (OC)

593

M.Tech. in Power Electronics and Electrical Drives

599

M.Tech. in Radio Frequency and Microwave Engineering

601

M.Tech. in Intelligent Control and Instrumentation

601

M.Tech. in Mining Engineering

636

M.Tech. in Industrial Engineering and Management

651

M.Tech. in Electronics Engineering (Communication & Signal Processing) (SP)

666

M.Tech. in Electronics Engineering (VLSI Design)

686

M.tech. in Artificial Intelligence and Data Science

754

M.Tech. in Computer Science and Engineering

762

Q:   What is the eligibility criteria for B.Tech programmes at IIT Dhanbad?
A: 

To be eligible for BTech programmes, candidates must have completed Class 12 with 75% aggregate (65 per cent for SC/ST). Moreover, if the candidates want to apply for BTech and Integrated MTech at IIT ISM Dhanbad, then they can apply via JEE Main followed by JEE Advanced application. The JEE Main application process consists of three steps, i.e. , registration, form filling & documents upload followed by payment of application fees.

IIT Dhanbad Cutoff 2025 For PWD All India Category

For the students belonging to the PWD category under the AI quota, the JEE Advanced cutoff ranks were released for only two BTech specialisations, including Computer Science and Engineering and Mathematics and Computing. For both branches, the maximum cutoff ranks required for admission were 99 and 215, respectively. With a lower rank of 99, Computer Science and Engineering was the most competitive. 

Course

Round 1 (Closing Rank)

Last Round (Closing Rank)

B.Tech. in Computer Science and Engineering

99

99 (R1)

B.Tech. in Mathematics and Computing

215

215 (R1)

Also Read: 

About the Author
author-image
Rashmi Sinha
Senior Executive
Rashmi Sinha is a Content Writer by profession. In her free time, she loves to explore new places & cuisines.
Get Admission and Placement Updates about IIT Dhanbad

News & Updates

Latest NewsPopular News
qna

Student Forum

chatAnything you would want to ask experts?
Write here...

Answered 3 days ago

Yes, you can get into IIT Dhanbad for the MSc and MSc Tech courses with an IIT JAM rank of 500, depending on your category, which round you are applying in, chosen course, etc. 

IIT Dhanbad cutoff 2026 has been published for round 1 for several All India categories. For the General AI category, 3 co

...Read more

N

Neerja Rohatgi

Contributor-Level 10

Answered 3 days ago

 IIT Dhanbad JAM Cutoff 2026 was published for round 1 regarding admission to the MSc and MSc Tech courses. The institution accepts the IIT JAM entrance examination results for the aforementioned courses. 

For the General AI category, the round 1 cutoff varied from 71 to 757, wherein the most competi

...Read more

N

Neerja Rohatgi

Contributor-Level 10

Answered 2 months ago

IIT ISM Dhanbad is popularly known for its BTech course. The institute offer BTech programme in more than 10 specialisations, namely Chemical Engineering, Civil Engineering, CSE, ECE, and others. The BTech placements rate in 2025 was 82.49%. The average package in 2025 for BTech students was INR 19.

...Read more

U

Upasana Shukla

Contributor-Level 10

Answered a month ago

1687 students registered for placements and 1327 students participated in 2025. Out of the participating students, 1085 students were placed. The overall placement rate recorded was 81.76%.

N

Nishtha Karan

Contributor-Level 10

Answered a month ago

IT Dhanbad provides international placements to its students. A total of 1144 offers were made during the placement drive 2025. Out of the total offers, 30 were international offers.

N

Nishtha Arora

Contributor-Level 10

Answered a month ago

A total of 249 PPOs were received and 221 Pre-placement offers were accepted during IIT Dhanbad placements 2025.

S

Satyendra Rai

Contributor-Level 10

Answered a month ago

The overall median package recorded during IIT Dhanbad placements 2025 was INR 13.24 LPA.

S

Saakshi Malhotra

Contributor-Level 10

Answered 4 months ago

The current tuition fees for BTech courses at IIT Dhanbad is currently unknown. Last year, the tuition fees at IIT Dhanbad stood at INR 1 lakh.

This fees was charged on per semester basis in eight instalments. Each instalment costed INR 12,500.

 

S

Saurabh Khanduri

Contributor-Level 10