B.Tech. in Plastics Engineering
- Public/Government Institute
- Estd. 1968
B.Tech. in Plastics Engineering at Central Institute of Plastics Engineering and Technology, Chennai Overview
B.Tech. in Plastics Engineering
at Central Institute of Plastics Engineering and Technology, Chennai
Central Institute of Plastics Engineering and Technology, Chennai offers 4 years B.Tech. in Plastics Engineering at the UG level. The total tuition fee is INR 2,00,000 for 4 years years. This information is sourced from the official website/ sanctioning body and is subject to change. Check other courses at Central Institute of Plastics Engineering and Technology, Chennai B.Tech. in Plastics Engineering.
Total Tuition Fees | ₹2.00 Lakh Get Fees details |
Duration | 4 years |
Course Level | UG Degree |
Mode of Course | Full Time |
Official Website | Go to Website  |
Seat breakup | 60 |
Type of University | Public/Government |
B.Tech. in Plastics Engineering
Table of content
- Overview
- Fees
- Student Reviews
- Placements
- Entry Requirements
- + 2 more items
B.Tech. in Plastics Engineering at Central Institute of Plastics Engineering and Technology, Chennai Fees
B.Tech. in Plastics Engineering
at Central Institute of Plastics Engineering and Technology, Chennai
Central Institute of Plastics Engineering and Technology, Chennai B.Tech. in Plastics Engineering tuition fee is INR 2,00,000 for 4 years. Check out the following table for the break-up of Central Institute of Plastics Engineering and Technology, Chennai fees for the B.Tech. in Plastics Engineering course:
| Fee components | Amount (4 years) |
|---|---|
The fees might include components other than tuition fees.
Mentioned fee is as per Tamil Nadu Engineering Admission (TNEA- 2023).
The Fee is for the candidate selected through Counselling.
The mention The fees might include components other than tuition fees.
Mentioned fee is as per Tamil Nadu Engineering Admission (TNEA- 2023).
The Fee is for the candidate selected through Counselling.
The mentioned fee is for Non-Accredited courses.
Only Accredited Fee will be applicable if the program/courses is currently accredited by NBA. If not, then above mentioned fee will be applicable.
Total Accredited fee- INR 220000 | ₹ 2.00 Lakh |
₹ 2.00 Lakh |
These are based on information available on various sources. Latest values may differ.B.Tech. in Plastics Engineering at Central Institute of Plastics Engineering and Technology, Chennai Students Ratings & Reviews
B.Tech. in Plastics Engineering
at Central Institute of Plastics Engineering and Technology, Chennai
Placements4.1
Infrastructure3.8
Faculty & Course3.6
Campus Life3.8
Value for Money3.9What students say about Central Institute of Plastics Engineering and Technology, Chennai
Placements
Infrastructure
Faculty
Other
LikesView All
The top recruiting companies are Dow Chemicals, HFCL, FANUC, L & T, etc.
Based on 18 Reviews
A
Anonymous
B.Tech. in Plastics Engineering - Batch of 2026
Offered by Central Institute of Plastics Engineering and Technology, Chennai
4
5Placements3Infrastructure4Faculty4Crowd & Campus Life4Value for Money
College with practical experience .
Placements: Most of the students are placed in campus placements. Very few opt for higher education. The minimum average salary package is 3.6 LPA. You will be offered positions such as Junior Associate or Production Assistant Manager, depending on your qualifications. Top recruiters are Reliance, Supreme, United International, and others.
Infrastructure: Classrooms are provided with basic facilities like enough tables, fans, and an LED projector. There are computer labs and separate laboratories for each subject. Hostel food is strictly average, and the facilities are too. However, the charges for food are very high, and it operates on a prepaid system. Sports activities in this college are rare.
Faculty: The difficulty level of semester exams is moderate to hard. You need to study from the beginning of the semester to get good marks. The plastics manufacturing field is a very good curriculum-oriented course and it will help you to explore in depth every product. Teachers are well-qualified to teach you, and interaction with them is also good.
Other: Overall this college is good but they need to improve in co curriculum activities also.
Reviewed on 19 Jul 2024Read More
A
Anonymous
B.Tech. in Plastics Engineering - Batch of 2026
Offered by Central Institute of Plastics Engineering and Technology, Chennai
4.2
4Placements4Infrastructure4Faculty4Crowd & Campus Life5Value for Money
CIPET the institute of plastics.
Placements: The placements in CIPET are quite good and last year there were too many companies like Reliance, Rather, UBE, and so on with a maximum package of 9.6 LPA. The placement coordinator is humble, and all students have been placed as the institute has given 100% placement.
Infrastructure: The infrastructure of the hostel has 8 floors, lifts are available and there is a warden, assistant warden and a caretaker who will take care of students and their health. The hostel has a good floor the room looks pretty decent and affordable.
Faculty: The teachers at CIPET Chennai are very humble and clear all the doubts that the students have. Mostly all the staff are graduated and are PhD holders and the only disadvantage is they are not available all time as they have too much work because the number of staff is less.
Reviewed on 16 May 2024Read More
A
Abdus Samed Irfan
B.Tech. in Plastics Engineering - Batch of 2027
Offered by Central Institute of Plastics Engineering and Technology, Chennai
3.8
5Placements3Infrastructure2Faculty4Crowd & Campus Life5Value for Money
Empowering Careers in Plastic Technology
.
Placements: CIPET-IPT Chennai is the best college for placements, with 100% placement every year. The monthly packages range from INR 35,000 to INR 80,000. Most students join CIPET for its excellent placement opportunities and its status as a premium Central Government College.
Infrastructure: The infrastructure of CIPET Chennai is decent compared to other government colleges. However, the canteen facilities are poor, and while the hostel buildings look good from the outside, their interiors need improvement. The food quality is acceptable. There is no Wi-Fi, the classrooms are non-air-conditioned, and the college lacks sports grounds.
Faculty: The teaching quality is not consistent, as some teachers attend classes irregularly. However, during lab sessions, they provide good guidance. Each subject has one teacher, but they do not provide notes. Internal marks are given based on student activity in class, but partiality is sometimes observed. Despite these issues, the curriculum offers excellent practical knowledge and applications. Exams are conducted by Anna University, and the questions and evaluations are straightforward and liberal.
Other: I secured admission to CIPET-IPT Chennai through Tamil Nadu Engineering Counseling. Although I also applied to the Madras Institute of Technology (MIT) for Rubber and Plastic Technology, I chose CIPET because it is a premier institute in plastic technology. CIPET provides superior lab and mechanical facilities and focuses on practical education, making it the best college in India for Plastic and Polymer Technology.
Reviewed on 9 Nov 2024Read More
S
Sugantha
B.Tech. in Plastics Engineering - Batch of 2023
Offered by Central Institute of Plastics Engineering and Technology, Chennai
4
5Placements4Infrastructure4Faculty3Crowd & Campus Life4Value for Money
I am satisfied with its placements, facilities, infrastructure, etc.
Placements: Around 95% of students are placed in this course. The average salary offered ranges from Rs 15,000 to Rs 50,000 depending upon the company and work offered. The top recruiting companies are Reliance, L&T, Valeo, Motherson, Dow Chemicals, etc.
Infrastructure: All facilities are available like Wi-Fi, classroom, library, and laboratories. The quality of food available in the mess and canteen is good. They provide healthy snacks. It provides a small playground to play certain games. The medical facility is also available on the campus.
Faculty: Teachers are helpful and knowledgeable. The teaching quality is good. The course curriculum is relevant and students gain industry knowledge. The pass percentage is 50%. The syllabus of our course is not much difficult when compared to other branches.
Other: Plastics are unavoidable in this current world, and they are unique to study so, I opted for this course. Our college conducts events, club activities, sports, games, etc.
Reviewed on 22 Apr 2022Read More
J
Jagadeesh A
B.Tech. in Plastics Engineering - Batch of 2027
Offered by Central Institute of Plastics Engineering and Technology, Chennai
3.8
5Placements3Infrastructure3Faculty4Crowd & Campus Life4Value for Money
I am absolutely satisfied with our college.
Placements: Mostly all the students were placed in jobs with good packages. The highest package was 15 LPA, and the lowest was 4 LPA offered in both B.Tech in Plastics Technology and B.E. in Manufacturing Engineering in the previous year for senior students. Reliance was the recruiting company. Internships were provided for all students. Many were selected for roles in design and production.
Infrastructure: At the Central Institute of Petrochemical Engineering and Technology (CIPET) IPT Chennai offers a good library. Infrastructure is okay. College campus is small compared to other colleges. There is no playground in college, though interested students can play sports and games.
Faculty: This college is under the control of Anna University for both B.Tech in Plastics Technology and B.E. in Manufacturing Engineering. Teachers are good and helpful during the exams. They are qualified and well-experienced. It is a 4 year degree course. Students can learn about the industry. Semester exams are easy if you study properly, and you crack exams easily.
Other: I chose this course to study a professional course at CIPET IPT Chennai. I am a B.Tech Plastics Technology student, which helps to develop skills and improve my knowledge and it is very important. College conducts events and scholarships are also available.
Reviewed on 3 Mar 2025Read More
View All 32 Reviews
B.Tech. in Plastics Engineering at Central Institute of Plastics Engineering and Technology, Chennai Frequently Asked Questions
B.Tech. in Plastics Engineering
at Central Institute of Plastics Engineering and Technology, Chennai
Q: Which courses does Central Institute of Plastics Engineering and Technology, Chennai offer?
ShikshaGPT says A:
Central Institute of Plastics Engineering and Technology, Chennai provides programmes including PG Diploma, M.E./M.Tech, UG Diploma, B.E. / B.Tech in streams such as Engineering, IT & Software, and are excellent for students to build their careers. The institute has specializations in Mechanical Engineering, Polymer Technology.
AskShikshaGPT on App
Q: What specializations do Central Institute of Plastics Engineering and Technology, Chennai offer in their courses?
ShikshaGPT says A:
Central Institute of Plastics Engineering and Technology, Chennai is a good institution for PG Diploma, M.E./M.Tech, UG Diploma, B.E. / B.Tech courses, and these programs are delivered by highly experienced faculty. Major specialisation at Central Institute of Plastics Engineering and Technology, Chennai are Mechanical Engineering, Polymer Technology.
AskShikshaGPT on App
Q: What is the intake for offered courses at Central Institute of Plastics Engineering and Technology, Chennai?
ShikshaGPT says A:
The seats availability for offered courses at Central Institute of Plastics Engineering and Technology, Chennai goes up to 564. Courses offerred by Central Institute of Plastics Engineering and Technology, Chennai are approved by eminent Government bodies such as AICTE.
AskShikshaGPT on App
Q: Is Central Institute of Plastics Engineering and Technology, Chennai a good college/Institute?
ShikshaGPT says A:
Central Institute of Plastics Engineering and Technology, Chennai is a well-known institution for PG Diploma, M.E./M.Tech, UG Diploma, B.E. / B.Tech courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, Central Institute of Plastics Engineering and Technology, Chennai has a rating of 4.28 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 4.09 on Campus Life, 4.36 on Placements, 4.26 on Faculty and 4.18 on Infrastructure.
AskShikshaGPT on App
Download exam sample paper
ISC
ISC
Tamilnadu 12th
CBSE 12th
B.Tech. in Plastics Engineering at Central Institute of Plastics Engineering and Technology, Chennai Placements
B.Tech. in Plastics Engineering
at Central Institute of Plastics Engineering and Technology, Chennai
Top Recruiters for Central Institute of Plastics Engineering and Technology, ChennaiBright Auto plast
Fanuc
Inventa Technologies
Reliance Industries Limited
Reynolds
VKC Group
B.Tech. in Plastics Engineering at Central Institute of Plastics Engineering and Technology, Chennai Entry Requirements
B.Tech. in Plastics Engineering
at Central Institute of Plastics Engineering and Technology, Chennai
General
SC
ST
Requirements for 12th grade
- 45%
- Read moreCandidate must have passed HSC (10+2) or its equivalent with above mentioned marks from any recognised Board/council. Candidate who have passed HSC i.e., 10+2 in any one of the Vocational Subject (Basic Mechanical Engineering/ Basic Electrical Engineering/ Basic Electronics Engineering/ Basic Civil Engineering/ Basic Automobile Engineering/ Textile Technology) with any one of the Engineering related subjects namely Mathematics, Physics or Chemistry with above mentioned minimum average percentage put together are also eligible to apply.
Tamilnadu 12th
ISC
CBSE 12th
Other eligibility criteria
Candidate must have passed VIII, IX, X, XI & XII Std. from schools situated in Tamil Nadu.
Tamil Nadu native candidate who have passed any of the VIII, IX, X, XI & XII Std. or their equivalent exam from schools situated outside Tamil Nadu can also apply. They should produce Original Nativity Certificate.
Children of Central Government Employees, irrespective of their nativity, provided their parents or guardians (only if both parents are not alive) have been serving in Tamil Nadu continuously for the past five years can be eligible to apply.
Sons & daughters of All India service Tamil Nadu cadre officers are eligible to apply. A Self declaration from the parent in this regard is to be produced.
Children of employees in the Public Sector or Government recognized institutions had been working in their organisations for the past five years are also eligible, irrespective of their domicile.
B.Tech. in Plastics Engineering at Central Institute of Plastics Engineering and Technology, Chennai Admission Process
B.Tech. in Plastics Engineering
at Central Institute of Plastics Engineering and Technology, Chennai
- CounsellingAdmission is through Tamil Nadu Engineering Admissions (TNEA) counselling guidelines based on marks obtained in class 12th final examination.
Important Dates
ALL
ISC
TAMILNADU 12TH
CBSE 12TH
Nov 3 - 26, 2025
CBSE 12th-Release of CBSE Class 12 exam Date Sheet 2026Tentative
Jan 1 - Feb 14, 2026
Conduct of CBSE 12th Practical exams 2026Tentative
Feb 17 - Mar 5, 2026
Conduct of CBSE 12th Exams 2026Tentative
B.Tech. in Plastics Engineering at Central Institute of Plastics Engineering and Technology, Chennai Cutoffs
B.Tech. in Plastics Engineering
at Central Institute of Plastics Engineering and Technology, Chennai
3Gender
Quota
Category
TNEA round-wise cutoff Rank: (General-All India)
| Round | 2023 | 2024 | 2025 |
|---|---|---|---|
| 1 | 19846 | 20171 | 38150 |
| 2 | 35841 | 38689 | 42760 |
TNEA round-wise cutoff Rank: (General-Home State)
| Round | 2018 |
|---|---|
| 1 | 13588 |
TNEA round-wise cutoff Rank: (OBC-All India)
| Round | 2023 | 2024 | 2025 |
|---|---|---|---|
| 2 | 71433 | 69081 | 62855 |
TNEA round-wise cutoff Rank: (OBC-Home State)
| Round | 2018 |
|---|---|
| 1 | 18430 |
UPCAT round-wise cutoff Rank: (General-All India)
| Round | 2018 |
|---|---|
| 1 | 33427 |
UPCAT round-wise cutoff Rank: (General-Home State)
| Round | 2018 |
|---|---|
| 1 | 33427 |
UPCAT round-wise cutoff Rank: (OBC-All India)
| Round | 2018 |
|---|---|
| 1 | 69238 |
UPCAT round-wise cutoff Rank: (OBC-Home State)
| Round | 2018 |
|---|---|
| 1 | 69238 |
Explore Courses offered by Central Institute of Plastics Engineering and Technology, Chennai
Select the Degree you are Interested in
Select the Stream you are Interested in
Other courses offered by Central Institute of Plastics Engineering and Technology, Chennai
60
- – / –
– / –
₹90.75 K
120
- – / –
– / –
₹90.75 K
View Other 6 Courses
Get best suited colleges for you in real-time
Here’s how it works:
Share your preferences with our assistant
Tell us about your city, course, budget & more
Get recommendations in no time
Discover best colleges that meet all your needs
It won’t take more than a minute!
Read B.E. / B.Tech reviews from Central Institute of Plastics Engineering and Technology, Chennai
Read ReviewsSimilar courses in the same city
B.Tech. in Computer Science and Engineering
Offered by SRM Institute of Science and Technology, Kattankulathur₹19 L
Overall Rating
4.0
4.0B.Tech. in Computer Science and Engineering
Offered by Vellore Institute of Technology - Chennai Campus₹7.8 L
Overall Rating4.1
4.1₹8 L
Overall Rating4.7
4.7₹2 L
Overall Rating4.2
4.2– / –
Overall Rating4.0
4.0B.Tech. in Computer Science Engineering
Offered by SRM Institute of Science and Technology, Chennai - Ramapuram Campus– / –
Overall Rating3.9
3.9₹9.3 L
Overall Rating3.8
3.8– / –
Overall Rating4.5
4.5B.Tech. in Plastics Engineering at Central Institute of Plastics Engineering and Technology, Chennai Students also asked
B.Tech. in Plastics Engineering
at Central Institute of Plastics Engineering and Technology, Chennai
Q: What is the fees range for courses offerred by the Central Institute of Plastics Engineering and Technology, Chennai?
ShikshaGPT says A:
The fees range for courses offerred by the Central Institute of Plastics Engineering and Technology, Chennai is around INR 50000 - INR 200000.
AskShikshaGPT on App
Q: Which companies generally recruit from Central Institute of Plastics Engineering and Technology, Chennai?
ShikshaGPT says A:
Central Institute of Plastics Engineering and Technology, Chennai offers placement support to its students. Notable organizations that visit the institute for recruitment include Sujan Copperstandard Avs Pvt Ltd Pune, Rks Saboo Motors, Globe Toyota, Ambigai Consultancy Services India Pvt Ltd, Eca Consultants, Athena Tradewinds Pvt Ltd.
AskShikshaGPT on App
B.Tech. in Plastics Engineering
at Central Institute of Plastics Engineering and Technology, Chennai
Student Forum
Anything you would want to ask experts?Answered 4 years ago
Surely you will get. By the way you must have got it by now if you have given that college in choice filling.
anonymous anonymous
Beginner-Level 3
Answered 4 years ago
Plastics Technology is better than Manufacturing Engg.
anonymous anonymous
Beginner-Level 3
Answered 4 years ago
Admission into B Tech Plastic Technology at Chennai is through single window counseling conducted by TNEA. ( Formerly by Anna university ). Cutoff for general category is usually 170 and 150 - 130 for reserved candidates. (This is according to 2020 trends). The College is located at the heart of the
anonymous anonymous
Beginner-Level 3
Answered 5 years ago
Hello,
The following Institutes are the best for studying the Plastic technology course.
1. Harcourt Butler Technical University, Kanpur
2. Central Institute of Plastics Engineering and Technology, Chennai
3. Central Institute of Plastics Engineering and Technology, Lucknow
4. Central Institute of P
konatham Abhishek
Scholar-Level 16
Answered 5 years ago
The B.Tech courses are offered at the following locations as under according to their ranking:
1. CIPET IPT Chennai
2. CIPET IPT Ahmedabad
3. CIPET IPT Bhubaneswar
4. CIPET IPT Lucknow
pradeep kumar
Scholar-Level 18
Answered 5 years ago
Hello,
There are plenty of colleges in India offering engineering undergraduate courses in plastics. The scope is of course huge for the students who pass out with plastics or polymer engineering. However the process of admission in each state is different and hence you will have to note it before a
Group Captain Vinayak Deo
Scholar-Level 18
Answered 5 years ago
Diwakar Goel
Scholar-Level 16
Answered 7 years ago
You need to take a state level entrance exam to get into CIPET, Chennai. It is a reputed college, so good marks are required.
Rudra Shaurya
Guide-Level 15
Content authored by:
Colleges in ChennaiCentral Institute of Plastics Engineering and Technology, ChennaiCoursesB.Tech. in Plastics EngineeringB.Tech. in Plastics Engineering at Central Institute of Plastics Engineering and Technology, Chennai News & Updates
B.Tech. in Plastics Engineering
at Central Institute of Plastics Engineering and Technology, Chennai
Latest
Popular
Md Shahzad · Oct 3, 2025
1.4L views
Jasleen Taneja · Oct 3, 2025
1.7L views
Salviya Antony · Oct 1, 2025
5.1L views
View all News & Updates
B.Tech. in Plastics Engineering at Central Institute of Plastics Engineering and Technology, Chennai Contact Information
B.Tech. in Plastics Engineering
at Central Institute of Plastics Engineering and Technology, Chennai
Address
T.V.K. Industrial Estate,
Guindy,
Chennai
Chennai ( Tamil Nadu)
Phone
Email
Go to College Website ->
Useful Links
Know more about Central Institute of Plastics Engineering and Technology, Chennai
- All About Central Institute of Plastics Engineering and Technology, Chennai
- Courses 2026
- Fees 2026
- Reviews on Placements, Faculty & Facilities
- Admission 2026 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Cut off & Merit List 2026
- Gallery 2026
- Infrastructure Details & Reviews
- Central Institute of Plastics Engineering and Technology, Chennai Faculty
- Compare Central Institute of Plastics Engineering and Technology, Chennai
- Central Institute of Plastics Engineering and Technology, Chennai Q&A
- Central Institute of Plastics Engineering and Technology, Chennai News & Articles
Know more about Programs
- Engineering
- Polymer Technology
- B Tech (Bachelor of Technology)
- Instrumentation Technology
- Food Technology
- BTech Chemical Engineering
- Aeronautical Engineering
- AI & ML Courses
- BTech Petroleum Engineering
- Metallurgical Engineering
- MTech in Computer Science Engineering
- VLSI Design
- Petroleum Engineering
- BTech Robotics Engineering
- Aerospace Engineering
My cutt off is 182.5 wid BC category can I get seat in cipet?. Is b tech plastic technology is good course or manufacturing engineering.