B.E. in Manufacturing Engineering
- Public/Government Institute
- Estd. 1968
B.E. in Manufacturing Engineering at Central Institute of Plastics Engineering and Technology, Chennai Overview
B.E. in Manufacturing Engineering
at Central Institute of Plastics Engineering and Technology, Chennai
Central Institute of Plastics Engineering and Technology, Chennai offers a 4 years B.E. in Manufacturing Engineering course at the UG level. To get admitted to this course, applicants must meet the entry requirements and must have a valid TNEA score. The total tuition fee for this course is INR 2,00,000 for the entire duration. In addition to the tuition fee, Central Institute of Plastics Engineering and Technology, Chennai charges students for other applicable fee components. The university has a seat intake of 60 for this course. Check out other specialisation of Central Institute of Plastics Engineering and Technology, Chennai B.E. / B.Tech.
Total Tuition Fees | ₹2.00 Lakh Get Fees details |
Duration | 4 years |
Course Level | UG Degree |
Mode of Course | Full Time |
Official Website | Go to Website  |
Seat breakup | 60 |
Type of University | Public/Government |
B.E. in Manufacturing Engineering
Table of content
- Overview
- Fees
- Student Reviews
- Placements
- Entry Requirements
- + 2 more items
B.E. in Manufacturing Engineering at Central Institute of Plastics Engineering and Technology, Chennai Fees
B.E. in Manufacturing Engineering
at Central Institute of Plastics Engineering and Technology, Chennai
The Central Institute of Plastics Engineering and Technology, Chennai B.E. in Manufacturing Engineering fee is inclusive of components such as Tuition Fees, One-Time Fees, Registration Fees, Exam Fees, and others. Also, candidates may be required to pay extra fees that are specific to the institution. The total tuition fee for the B.E. in Manufacturing Engineering program at Central Institute of Plastics Engineering and Technology, Chennai is INR 2,00,000. More information on the Central Institute of Plastics Engineering and Technology, Chennai B.E. in Manufacturing Engineering fee is as follows:
| Fee components | Amount (4 years) |
|---|---|
The fees might include components other than tuition fees.
Mentioned fee is as per Tamil Nadu Engineering Admission (TNEA- 2023).
The Fee is for the candidate selected through Counselling.
The mention The fees might include components other than tuition fees.
Mentioned fee is as per Tamil Nadu Engineering Admission (TNEA- 2023).
The Fee is for the candidate selected through Counselling.
The mentioned fee is for Non-Accredited courses.
Only Accredited Fee will be applicable if the program/courses is currently accredited by NBA. If not, then above mentioned fee will be applicable.
Total Accredited fee- INR 220000 | ₹ 2.00 Lakh |
₹ 2.00 Lakh |
These are based on information available on various sources. Latest values may differ.
L
Lokeshwaran Basuvaraj 
B.E. in Manufacturing Engineering - Batch of 2024
Offered by Central Institute of Plastics Engineering and Technology, Chennai
2.4
3Placements3Infrastructure2Faculty2Crowd & Campus Life2Value for Money
Disappointed college with good placement for me.
Placements: Students without a history of arrears and with a minimum percentage of 70 will be placed.
The highest package in my department is 5LPA and the lowest package is 2.8 LPA.
The top recruiters are ITW, Reliance, Besmark, Fanuc, an, Besmark, Fanuc, and L&T.
The same applies to students without a history of arrears with an above 7 CGPA, who are working as interns in Valeo.
Mostly, the roles are like marketing, design, production, and supervisor.
Infrastructure: Classroom and library atmosphere will be good. In labs, most of the equipment will not work.
Highest qualifications of faculty are from M.Tech colleges. Faculty from testing centers and research centers are also provided. Some faculty are contract, and sometimes they provide guest faculty.
Faculty: As I already mentioned, faculty are with M.Tech qualification, and their teachings are also not so good to understand. Most of the time, they won't come to the class.
Yes, my course, manufacturing engineering, is purely industry-based, and I make students ready for industry
Pass mark is 50%, and semester exams are not so tough. We can self-study and self-prepare just 15 days before the exam.
Other: I chose this because a few colleges offer this course and have limited seats.
Along with the degree, we need to concentrate on extra design courses.
In my academics, they did not conduct any big events; just one symposium, that too they conducted like a small event, not a big chief guest, and program.
Reviewed on 14 Oct 2024Read More
N
Nithish
B.E. in Manufacturing Engineering - Batch of 2026
Offered by Central Institute of Plastics Engineering and Technology, Chennai
3.6
4Placements3Infrastructure4Faculty3Crowd & Campus Life4Value for Money
It is a good college for placements.
Placements: In our college, around 80% of students are placed. The highest salary package offered is 10 LPA and the lowest salary package offered is 4.5 LPA. Top recruiting companies visit our campus. Some students do their internships at top reputed companies.
Infrastructure: Wi-Fi is not available. Classrooms are spacious. Projectors are available in classrooms. A small library is available. The quality of food in the hostel is average. A doctor is always available in the college and hostel for medical assistance. We have various sports clubs for cricket, football, volleyball, chess, etc.
Faculty: Our teachers are very talented and helpful. They are knowledgeable. You can ask any question without hesitation about your subject. In the first year, you learn basic engineering and then core subjects. Semester exams are conducted by Anna University because this college is affiliated with it. A CGPA of 7 to 7.5 is required to pass.
Other: I chose this course to gain some valuable knowledge about plastics. Our college organises a few events. You can participate in other college events. Our college is located in an industrial area. A nearby metro station is available.
Reviewed on 30 Apr 2023Read More
A
Anonymous
B.E. in Manufacturing Engineering - Batch of 2021
Offered by Central Institute of Plastics Engineering and Technology, Chennai
3
3Placements4Infrastructure2Faculty3Crowd & Campus Life3Value for Money
Our college is excellent if you can learn and observe everything on your own.
Placements: In our college, almost 50% of students had been placed in our course. The highest salary offered was Rs. 50,000 per month and the lowest salary offered was Rs. 15,000 per month. Top recruiting companies like Welspun, ITC, Valeo, etc., visited our campus. No one got an internship in our course. The top role offered was a junior engineer.
Infrastructure: There was no Wi-Fi in our college but classrooms were very good and neat. The benches and tables were very comfortable. We had all the equipment in our lab. We had an industry running inside our campus so we could learn more. The hostel facility was good except for the food and the college ground was not so huge. Library facilities were very good and we had an e-library.
Faculty: Teachers were knowledgeable but classes won't be held often. We have to study on our own. Since we had very good lab facilities, it made students industry-ready. The pass percentage for every semester was 50%.
Other: This is one of the unique courses offered only at CIPET. There were no other colleges in Tamilnadu offering plastic technology and manufacturing engineering. The teaching should be improved by our faculty members and placements were quite average. Scholarships were provided.
Reviewed on 17 Nov 2022Read More
SR
SAKTHI PRAKASH RR
B.E. in Manufacturing Engineering - Batch of 2021
Offered by Central Institute of Plastics Engineering and Technology, Chennai
5
5Placements5Infrastructure5Faculty5Crowd & Campus Life5Value for Money
Review of Central Institute of Plastics Engineering and Technology, Chennai.
Placements: Students must score 8.0 CGPA to get placed. In our course, the minimum salary package offered is 2.5 LPA. Top recruiting companies of our college are Dow Chemicals, Newgen Engineering and Motherson. Students who score CGPA of about 8.0 will be offered a salary package of 4 LPA, and students who scored CGPA of less than 7 will be offered a salary package of 2.5 LPA.
Infrastructure: The campus is Wi-Fi enabled, but the password is only given to faculty members. Our college provides well-equipped labs, digital library and advanced laboratory. Hostels are well-sanitised with very clean atmosphere. There is a private hospital clinic at our college, and our college also supports all sports.
Faculty: Our faculty members are well-knowledgeable and higher qualified. They have an experience of about a minimum of 3-4 years in other colleges. There is a peaceful environment to study, and it is the best place. All doubts are clarified.
Other: I have chosen this course because it is the best course in the automobile sector. In Tamil Nadu, there are only a few colleges which have this course.
Reviewed on 6 Mar 2020Read More
LK
LALLU PRASATH Krishna moorthy
B.E. in Manufacturing Engineering - Batch of 2019
Offered by Central Institute of Plastics Engineering and Technology, Chennai
4.2
4Placements4Infrastructure3Faculty5Crowd & Campus Life5Value for Money
In CIPET, you will acquire a lot of things if you utilise all the amenities.
Placements: Placements here are quite good. The placement cell strives hard to place all the students irrespective of their backlog. But the concern is core companies are not invited here for recruitment for the manufacturing department. Placements for plastic department students will be good every year in terms of both statistics and salary package.
Infrastructure: Facilities like ARSTPS and R&D wing are available within our campus. Moreover, every technical equipment and moulding machinery, CNC and EDM have been installed in our labs. Classrooms look good. There is an in-house medical aid room on our campus. One more concern is there is no playground for sports.
Faculty: Faculty members for the plastic department are well versed in their field. But compared to manufacture engineering, the student-faculty ratio is not that much good in the plastic engineering department. The course curriculum of Anna University has to be revised in terms of providing industrial exposure to the students, so there is no point in blaming our college for the course curriculum.
Other: Our college celebrates cultural fest named Cipofest and technical fest named TEPIC every year.
Reviewed on 1 Aug 2019Read More
View All 11 Reviews
B.E. in Manufacturing Engineering at Central Institute of Plastics Engineering and Technology, Chennai Frequently Asked Questions
B.E. in Manufacturing Engineering
at Central Institute of Plastics Engineering and Technology, Chennai
Q: What is the intake for offered courses at Central Institute of Plastics Engineering and Technology, Chennai?
A:
The seats availability for offered courses at Central Institute of Plastics Engineering and Technology, Chennai goes up to 564. Courses offerred by Central Institute of Plastics Engineering and Technology, Chennai are approved by eminent Government bodies such as AICTE.
AskShikshaGPT on App
Q: Is Central Institute of Plastics Engineering and Technology, Chennai a good college/Institute?
A:
Central Institute of Plastics Engineering and Technology, Chennai is a well-known institution for PG Diploma, M.E./M.Tech, UG Diploma, B.E. / B.Tech courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, Central Institute of Plastics Engineering and Technology, Chennai has a rating of 4.28 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 4.09 on Campus Life, 4.36 on Placements, 4.26 on Faculty and 4.18 on Infrastructure.
AskShikshaGPT on App
Q: What is the fees range for courses offerred by the Central Institute of Plastics Engineering and Technology, Chennai?
A:
The fees range for courses offerred by the Central Institute of Plastics Engineering and Technology, Chennai is around INR 50000 - INR 200000.
AskShikshaGPT on App
Download exam sample paper
ISC
ISC
Tamilnadu 12th
CBSE 12th
B.E. in Manufacturing Engineering at Central Institute of Plastics Engineering and Technology, Chennai Placements
B.E. in Manufacturing Engineering
at Central Institute of Plastics Engineering and Technology, Chennai
Top Recruiters for Central Institute of Plastics Engineering and Technology, ChennaiBright Auto plast
Fanuc
Inventa Technologies
Reliance Industries Limited
Reynolds
VKC Group
B.E. in Manufacturing Engineering at Central Institute of Plastics Engineering and Technology, Chennai Entry Requirements
B.E. in Manufacturing Engineering
at Central Institute of Plastics Engineering and Technology, Chennai
General
SC
ST
Requirements for 12th grade
- 45%
- Read moreCandidate must have passed HSC (10+2) or its equivalent with above mentioned marks from any recognised Board/council. Candidate who have passed HSC i.e., 10+2 in any one of the Vocational Subject (Basic Mechanical Engineering/ Basic Electrical Engineering/ Basic Electronics Engineering/ Basic Civil Engineering/ Basic Automobile Engineering/ Textile Technology) with any one of the Engineering related subjects namely Mathematics, Physics or Chemistry with above mentioned minimum average percentage put together are also eligible to apply.
Tamilnadu 12th
ISC
CBSE 12th
Other eligibility criteria
Candidate must have passed VIII, IX, X, XI & XII Std. from schools situated in Tamil Nadu.
Tamil Nadu native candidate who have passed any of the VIII, IX, X, XI & XII Std. or their equivalent exam from schools situated outside Tamil Nadu can also apply. They should produce Original Nativity Certificate.
Children of Central Government Employees, irrespective of their nativity, provided their parents or guardians (only if both parents are not alive) have been serving in Tamil Nadu continuously for the past five years can be eligible to apply.
Sons & daughters of All India service Tamil Nadu cadre officers are eligible to apply. A Self declaration from the parent in this regard is to be produced.
Children of employees in the Public Sector or Government recognized institutions had been working in their organisations for the past five years are also eligible, irrespective of their domicile.
B.E. in Manufacturing Engineering at Central Institute of Plastics Engineering and Technology, Chennai Admission Process
B.E. in Manufacturing Engineering
at Central Institute of Plastics Engineering and Technology, Chennai
- CounsellingAdmissions are made through single window counseling based on TNEA merit list which is prepared on the basis of Class 12th score.
Important Dates
ALL
ISC
TAMILNADU 12TH
CBSE 12TH
Oct 15 - Nov 20, 2025
Release of ISC time table 2026Tentative
Nov 3 - 26, 2025
CBSE 12th-Release of CBSE Class 12 exam Date Sheet 2026Tentative
Jan 1 - Feb 14, 2026
Conduct of CBSE 12th Practical exams 2026Tentative
B.E. in Manufacturing Engineering at Central Institute of Plastics Engineering and Technology, Chennai Cutoffs
B.E. in Manufacturing Engineering
at Central Institute of Plastics Engineering and Technology, Chennai
3Gender
Quota
Category
TNEA round-wise cutoff Rank: (General-All India)
| Round | 2023 | 2024 | 2025 |
|---|---|---|---|
| 1 | 20468 | 23836 | 37189 |
| 2 | 47459 | 40811 | 39485 |
TNEA round-wise cutoff Rank: (General-Home State)
| Round | 2018 |
|---|---|
| 1 | 15092 |
TNEA round-wise cutoff Rank: (OBC-All India)
| Round | 2023 | 2024 | 2025 |
|---|---|---|---|
| 2 | 73604 | 68183 | 66678 |
TNEA round-wise cutoff Rank: (OBC-Home State)
| Round | 2018 |
|---|---|
| 1 | 20883 |
Explore Courses offered by Central Institute of Plastics Engineering and Technology, Chennai
Select the Degree you are Interested in
Select the Stream you are Interested in
Other courses offered by Central Institute of Plastics Engineering and Technology, Chennai
60
- – / –
– / –
₹90.75 K
120
- – / –
– / –
₹90.75 K
View Other 6 Courses
Get best suited colleges for you in real-time
Here’s how it works:
Share your preferences with our assistant
Tell us about your city, course, budget & more
Get recommendations in no time
Discover best colleges that meet all your needs
It won’t take more than a minute!
Read B.E. / B.Tech reviews from Central Institute of Plastics Engineering and Technology, Chennai
Read ReviewsCompare Courses From Similar Colleges
Similar courses in the same city
B.Tech. in Computer Science and Engineering
Offered by SRM Institute of Science and Technology, Kattankulathur₹19 L
Overall Rating
4.0
4.0B.Tech. in Computer Science and Engineering
Offered by Vellore Institute of Technology - Chennai Campus₹7.8 L
Overall Rating4.1
4.1₹8 L
Overall Rating4.7
4.7₹2 L
Overall Rating4.2
4.2– / –
Overall Rating4.0
4.0B.Tech. in Computer Science Engineering
Offered by SRM Institute of Science and Technology, Chennai - Ramapuram Campus– / –
Overall Rating3.9
3.9₹9.3 L
Overall Rating3.8
3.8₹2 L
Overall Rating4.1
4.1B.E. in Manufacturing Engineering at Central Institute of Plastics Engineering and Technology, Chennai Students also asked
B.E. in Manufacturing Engineering
at Central Institute of Plastics Engineering and Technology, Chennai
Q: What specializations do Central Institute of Plastics Engineering and Technology, Chennai offer in their courses?
A:
Central Institute of Plastics Engineering and Technology, Chennai is a good institution for PG Diploma, M.E./M.Tech, UG Diploma, B.E. / B.Tech courses, and these programs are delivered by highly experienced faculty. Major specialisation at Central Institute of Plastics Engineering and Technology, Chennai are Mechanical Engineering, Polymer Technology.
AskShikshaGPT on App
Q: Which courses does Central Institute of Plastics Engineering and Technology, Chennai offer?
A:
Central Institute of Plastics Engineering and Technology, Chennai provides programmes including PG Diploma, M.E./M.Tech, UG Diploma, B.E. / B.Tech in streams such as Engineering, IT & Software, and are excellent for students to build their careers. The institute has specializations in Mechanical Engineering, Polymer Technology.
AskShikshaGPT on App
Q: What is covered in Machine Design subject in B.Tech course?
A:
Dear candidate, the subject of Machine Design basically teaches you about the designing fundamentals of various types of machinery across industries. You get to learn about the different ways in which elements can be combined to form an equipment or machine system and get the work done in an effective manner.
The knowledge of this subject is very important for a mechanical engineer as he/she will have to put this to use in the future whenever they enter the workforce as a mechanical engineering professional.
Hope this cleared your doubt. Have a good day.
AskShikshaGPT on App
B.E. in Manufacturing Engineering
at Central Institute of Plastics Engineering and Technology, Chennai
Student Forum
Anything you would want to ask experts?Answered 6 years ago
2017- 14353 ( Max.) Closing rank
2016- 18495 ( Max.) Closing rank.
As we compared to last year closing rank , hopefully you can get the admission.
h
heena agrawal
Scholar-Level 17
Answered 7 years ago
You probably can. If you could tell your category then it will be much easier to tell accurately that whether you will get it or not.
Rudra Shaurya
Guide-Level 15
Content authored by:
Colleges in ChennaiCentral Institute of Plastics Engineering and Technology, ChennaiCoursesB.E. in Manufacturing EngineeringB.E. in Manufacturing Engineering at Central Institute of Plastics Engineering and Technology, Chennai News & Updates
B.E. in Manufacturing Engineering
at Central Institute of Plastics Engineering and Technology, Chennai
Latest
Popular
View all News & Updates
B.E. in Manufacturing Engineering at Central Institute of Plastics Engineering and Technology, Chennai Contact Information
B.E. in Manufacturing Engineering
at Central Institute of Plastics Engineering and Technology, Chennai
Address
T.V.K. Industrial Estate,
Guindy,
Chennai
Chennai ( Tamil Nadu)
Phone
Email
Go to College Website ->
Useful Links
Know more about Central Institute of Plastics Engineering and Technology, Chennai
- All About Central Institute of Plastics Engineering and Technology, Chennai
- Courses 2026
- Fees 2026
- Reviews on Placements, Faculty & Facilities
- Admission 2026 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Cut off & Merit List 2026
- Gallery 2026
- Infrastructure Details & Reviews
- Central Institute of Plastics Engineering and Technology, Chennai Faculty
- Compare Central Institute of Plastics Engineering and Technology, Chennai
- Central Institute of Plastics Engineering and Technology, Chennai Q&A
- Central Institute of Plastics Engineering and Technology, Chennai News & Articles
Know more about Programs
- Engineering
- Mechanical Engineering
- B Tech (Bachelor of Technology)
- Food Technology
- Instrumentation Technology
- BTech Chemical Engineering
- AI & ML Courses
- Aeronautical Engineering
- BTech Petroleum Engineering
- Petroleum Engineering
- VLSI Design
- MTech in Computer Science Engineering
- Metallurgical Engineering
- BTech Robotics Engineering
- BTech in Biotechnology Engineering
I have 170 cutoff Iwill get seat in this college