B.Tech Information Technology Colleges in India

Rajeev Gandhi Memorial College of Engineering and Technology is a well-known institution for B.E. / B.Tech, M.E./M.Tech, MBA/PGDM, MCA courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, Rajeev Gandhi Memorial College of Engineering and Technology has a rating of 3.79 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 3.85 on Campus Life, 3.54 on Placements, 3.85 on Faculty and 3.98 on Infrastructure.

The fee bracket for programs offerred by the R.M.D. Engineering College is approximately INR 50000 - INR 200000.

Dear candidate, the subject of Machine Design basically teaches you about the designing fundamentals of various types of machinery across industries. You get to learn about the different ways in which elements can be combined to form an equipment or machine system and get the work done in an effective manner.

The knowledge of this subject is very important for a mechanical engineer as he/she will have to put this to use in the future whenever they enter the workforce as a mechanical engineering professional.

Hope this cleared your doubt. Have a good day.

As per Shiksha verified reviews, QIS College of Engineering & Technology has an impressive review rating of 3.58 by 181 students.

Candidates who are Class 12 pass with at least 60% aggregate in PCM can apply for ASET Noida BTech admission under non sponsored category. The minimum aggregate for sponsored category is 55%. Candidates aggregate is calculated as per marks scored in English and three academic subjects. 

The Faculty of Engineering at Jain deemed to be University offers many B.Tech and M.Tech courses in different specialisation . The ways to take admission into these courses are:

1. Qualify entrance exams JET (Jain University Entrance Test) or othe exams like JET, MBA, CMAT, NMAT, XAT with good score for B-Tech

2. For M.Tech - JET, GATE and AMIE.

3. Admission by considering high scores of other higher level exams are also valid in some extraordinary cases.

4. Direct admission via management quota

 . The ways to take admission into these courses are

1. Qualify entrance exams JET (Jain University Entrance Test) or othe exams like JET, MBA, CMAT, NMAT, XAT with good score for B-Tech

2. For M.Tech - JET, GATE and AMIE.

3. Admission by considering high scores of other higher level exams are also valid in some extraordinary cases.

4. Direct admission via management quota

Admission to VIT is based on JEE Main ranks. Candidates seeking admission to VIT Pune can check out the last three years closing ranks for General category students to understand cutoff trends:

Course	2021	2022	2023
B.Tech. in Chemical Engineering	242534	141728	50842
B.Tech. in Computer Engineering	35229	19223	14384
B.Tech. in Electronics and Telecommunication Engineering	84305	44184	29317
B.Tech. in Artificial intelligence and Data Science Engineering	55659	35488	24358
B.Tech. in Instrumentation and Control Engineering	216750	100878	60496
B.Tech. in Information Technology	38059	25608	19871
B.Tech. in Mechanical Engineering	173180	80145	53954
B.Tech. in Artificial Intelligence and Machine Learning	– / –	30585	21672
B.Tech. in Artificial Intelligence	– / –	28914	19067

Yes, candidates can get admission to K J Somaiya School of Engineering for its BTech programme without appearing for the JEE Mains exam. The school accepts various entrance exams, such as JEE Main, MHT CET, CUET, SAT India, and PERA CET to shortlist the BTech candidates. Those who are selected must present the relevant documents to prove their eligibility.

For the 2022 academic year, the JEE main cut off for General category candidates in All India quota for BE in Computer Engineering at D.Y. Patil College of Engineering, Akurdi stood at 61542. B.Tech cut off varies depending on the category and domicile/quota of the applicant. For more details on the same, students are advised to check other course and category cutoff of D.Y. Patil College of Engineering, Akurdi here.

The median salary package offered to the students after finishing B.E. / B.Tech from Shiv Nadar University (SNU) is INR 997,000. While, the Median package offered by Maharaja Agrasen Institute of Technology after completion of B.E. / B.Tech is INR 825,000. Basis these stats, Shiv Nadar University (SNU) is better option compared to Maharaja Agrasen Institute of Technology on the Median salary parameter.

The median salary package offered to the students after finishing B.E. / B.Tech from Shiv Nadar University (SNU) is INR 997,000. While, the Median package offered by Maharaja Surajmal Institute of Technology after completion of B.E. / B.Tech is INR 650,000. Basis these stats, Shiv Nadar University (SNU) is better option compared to Maharaja Surajmal Institute of Technology on the Median salary parameter.

Yes, East Point Group of Institutions is good for BTech students. CSE is a popular branch at the college. It provide placements support to the students. In the 2023 placements, the highest package offered was INR 25 LPA. As per the official website, over 300 companies participated in the placements drive. Moreover, the placement rate recorded during East Point Group of Institutions placements in recent past stood at 97%.

The average package for B.Tech in Computer Science and Information Technology (CS IT) students at K L College of Engineering is approximately INR 4,00,000 per annum. This figure represents the typical salary offered to graduates during campus placements. Keep in mind that individual salaries may vary based on factors such as the student performance the company and the specific job role. It is essential to stay informed about placement opportunities and prepare well for interviews to secure a competitive packages. You want to get additional information please check college review in our college website. 

BVP Delhi JEE Main cutoff was released for several category students, including General, ST, SC and OBC, among others. During the Bhartiya Vidya Peeth Delhi cutoff 2023, the last round closing ranks for BTech ranged between 455500 and 655311 for the ST All India category candidates. For SC category students, the last round closing ranks ranged between 187240 and 318810 for the AI quota. 

Candidates can refer to the table given below to check out the category-wise last round closing rank for BTech in CSE course:

Category	Last Round Closing Rank (AI Quota)
General	53659
ST	455500
SC	187240

As per the data collated from verified students' reviews on Shiksha, companies, such as Capgemini, Infosys, Amazon, Accenture, TCS, Wipro, Walmart, and Tech Mahindra hire the students of this college. Additionally, 70-90% of students get placement opportunities every year with an average salary ranging between INR 2.5 and INR 5.35 lakh. Hence, it is a good college for BTech, considering the placement statistics. In 2024, the highest package offered at the college stood at INR 55 LPA. AKGEC Ghaziabad is ranked by India Today and Times. In 2024, Times ranked the college #149 for its BTech course.

Rungta College of Engineering and Technology follows a streamlined admission procedure that primarily involves entrance tests. Prospective students can secure their admission through direct entry based on their performance in these entrance examinations.

Rungta College of Engineering and Technology (RCET) welcomes prospective students through a diverse range of entrance exams, both at the national and state levels. At the national level, the college recognizes the significance of exams such as CAT, XAT, MAT, CMAT, GMAT, ATMA, JEE Main, GATE, and NIMCET, covering a broad spectrum of academic disciplines including management, engineering, and computer applications. For candidates seeking admission through state-level exams, Rungta College of Engineering and Technology (RCET) accepts CGPET for engineering aspirants, Pre-MCA for those interested in computer applications, and CGPPT for Polytechnic courses. This inclusive approach ensures that students from various educational backgrounds and regions have the opportunity to pursue their desired courses at Rungta College of Engineering and Technology (RCET).

The Sharda School of Engineering and Technology (SSET) offers different admissions for B.Tech programmes based on the student's category and branch.

There are 1125 places available for the B.Tech programme at SSET, with 900 seats available for the general category and 225 seats available for the NRI/sponsored category. The intake proportion may vary year by year depending upon the categories and branches.

Branch	General	NRI
CSE	240	60
ME	120	30
EEE	60	15
ECE	120	30

The total seats offered for B.E. / B.Tech at Atria Institute of Technology and KLS Gogte Institute of Technology, Belagavi are 900 and 780, respectively. While Atria Institute of Technology offers this course in 12 specialisations, KLS Gogte Institute of Technology, Belagavi offers the same in 13 specialisations. Hence, there are higher chances of getting a seat at Atria Institute of Technology due to higher seats.

Heritage Institute of Technology offers a Full Time BE/BTech programme that lasts 4 years. It is available in 21 specializations. Students can apply for B.Tech at HIT provided they clear the selection process. The total number of seats alloted for B.Tech programme is 1140 and it is distributed into all the specilizations. Students who want to get into HIT must clear the eligibility criteri aset by the institute for B.Tech i.e. must have passed 10+2 from a recognised university, must secure a valid score at JEE Mains and clear the cutoff. Once the qualify candidates are shortlisted they are called for counselling and based oon their ranking the seats are alloted to them.

Yes, direct admission to JECRC Foundation in Jaipur is possible for some programs based on Class 12th marks, especially for those not appearing for the JEE exam, according to JECRC University. While some programs may require a minimum of 60% aggregate marks, others might have different criteria. It's best to check the specific program's eligibility requirements on the JECRC University website.