B.Tech Construction Engineering Colleges in India

The Jain Deemed-to-be University, Faculty of Engineering and Technology offers BTech programme with the duration of four years. The course is divided in eight equal semesters. The mode of the course is full-time. There are 35+ engineering programmes available at the Faculty of Engineering and Technology. The institute also offers lateral entry for the students who have Diploma in engineering.

The total fee for HITS Chennai is cumulative of several components, such as tuition fees, caution money, hostel fees, insurance, etc. Students have to pay the admission fees after the final selection. The fee can vary from one BTech specialisation to another. The table below further showcases the Hindustan University BTech fee structure:

Course Name	One-Time Fee	Tuition Fee	Hostel Fee
BTech	INR 8,500	INR 4.76 Lacs - INR 13.02 lakh	INR 2.96 lakh

NOTE: The above-mentioned fee is taken from the official website/sanctioning body. It is still subject to changes and hence, is indicative.

The total seats offered for B.E. / B.Tech at Atria Institute of Technology and JSS Science and Technology University are 900 and 880, respectively. While Atria Institute of Technology offers this course in 12 specialisations, JSS Science and Technology University offers the same in 14 specialisations. Hence, there are higher chances of getting a seat at Atria Institute of Technology due to higher seats.

Yes, candidates can join BTech courses offered by Anurag University without appearing for the Anurag CET. Aside from Anurag CET, candidates can also apply through TS EAMCET.

Additionally, candidates with a minimum aggregate of 60% in PCM stream of Class 12 can be selected based on board exam scores.

Yes, you can start MIT-WPU BTech registration process before entrance results are published. The online portal allows candidates to create profiles and upload basic academic transcripts early. Applicants can also draft and submit their mandatory five-hundred-word Statement of Purpose essay. However, final merit seat allotment only happens after official test scores are added. 

Yes, candidates  can join UEM Jaipur directly if they meet the eligibility criteria for the chosen programme. UEM Jaipur offers MBA course at postgraduate-level cousre. Find below the elgibility criteria below:

• BTech: Class 12 (all subjects) from a recognised board with Physics and Maths as compulsory subjects and one among Biology/ Chemistry/ Vocational subjects as the third compulsory subject with a minimum of 45% aggregate in the three compulsory subjects

  BTech Lateral Entry: Diploma (or a Diploma certificate) from a recognised institute (as per UGC/AICTE) in the appropriate branch of Engineering & Technology with 45% aggregate OR BSc degree with a minimum of 45% aggregate with Maths as a subject (BSc students are required to clear Engineering Graphics and Engineering Mechanics of First Year of Engineering)

BTech CSE highest package data is not released. However, the average and median package recorded during IIT Madras BTech CSE placements 2025 was 53.2 LPA and 46 LPA.

The total fee for BTech range from INR 4.5 lakh - INR 36 lakh. Admission to BTech course is based on LPUNEST or CUET UG scores. After completion of the selection rounds, shortlisted aspirants need to pay the course fee to confirm their admission. Candidates need to first register with an application fee (INR 1,000 for males) and (INR 500 for females) for LPUNEST. 

No, for Jadavpur University BE/ BTech admission, a valid WBJEE score is mandatory. To be eligible for the BTech programme offered at Jadavpur University, you need to pass Class 12 from a recognised board with Physics, Chemistry and Mathematics as compulsory subjects. Apart from the BTech course, Jadavpur University offers a four-year full-time BE programme, covering fourteen specialisations. Jadavpur University BE admission is also based on the WBJEE score.

Yes, you can get NIT Patna with a rank of 40000 if you belong to the General AI category. This category had the overall cutoff ranging from 1460 to 49062 in in the last round in 2026. Hence, admission at NIT Patna for this category is possible. 

On another hand, for the General HS category, the NIT Patna JEE Main cutoff 2026 varied between 3694 and 57336. So, students in this category can also avail admission. 

As per the latest brochure 2025-26 released by Graphic Era University, the highest package offerd was INR 61.99 LPA. This was offered by Atlassian to BTech CSE candidate. There is no average or median package released by Graphic Era University. 

Some of the top recruiters that visited Medicaps University during the recent placement drive included TCS, CISCO, Microsoft and Nestle.

LPU Admission Office offers numerous BTech specialisations. Some of the popular LPU (Admission Office) BTech specialisations are given below: 

• BTech Computer Science & Engineering 
• BTech Electronics & Communications Engineering 
• BTech Automobile Engineering
• BTech Mechanical Engineering
• BTech Civil Engineering
• BTech Chemical Engineering etc.

Inorder to be accepted by the Dev Bhoomi Institute of Technology, the candidate must have scored 50 and above. He or she must have a valid score and rank in JEE or UKSEE or state government recognised entrance exams for B.Tech.  For B.Tech lateral entry there is no entrance exam but they should hold a Diploma in engineering or BSc in Mathematics. 

Eligible Candidates need to have a valid score In GATE for M.Tech or PG. The final students to be selected will be based on a written test, GDPI, academic merit, work experience and score in applicable exams. 

To apply for scholarship at Symbiosis Skills and Professional University, each candidate is required to make separate application for scholarships under merit category" or "other category" scheme for each programme of the University. Secondly, candidate should apply online on sspu.ac.in for scholarship. For continuation of scholarship, students need to apply before commencement of new academic year, with the result of previous academic year.

Corporate alliances for Chanakya University BTech include innovative engineering brands. The university partners with EDS Technologies and Cadmaxx Solutions for training. Students also collaborate with Bullwork Mobility on automated vehicle designs. These relationships create direct pathways for hiring during final year placements.

JSPM University BTech fee is between INR 4.2 Lacs to INR 8 lakh, depending on the specialisation. The BTech courses like civil engineering and electrical engineering are priced around 5 lakhs. While machine learning, AI, or data Science cost around 8 lakhs. Apart from tuition fees, students may need to pay other charges, such as laboratory fees,  library charges,  and hostel fees. The given fee is as per official website/ sanctioning body. It can still be revised and hence, is indicative. 

Yes, Indian national candidates must pass HSC or its equivalent examination with Physics and Mathematics as compulsory subjects along with one of the Chemistry or Biotechnology or Biology or Technical Vocational subject or Computer Science or Information Technology or Informatics Practices or Agriculture or Engineering Graphics or Business Studies with at least 45% aggregate (40% aggregate, in case of Backward class categories and Persons with Disability candidates belonging to Maharashtra State only) in the above subjects taken together to apply for BTech course. The preference shall be given to the candidate obtaining non-zero positive score in JEE Mains Paper-I over the candidates who obtained a non-zero score in MGMU-CET/ MHT CET/ PERA CET. Aspirants who have passed Diploma in Engineering and Technology with at least 45% aggregate 40% aggregate, in case of Backward Class categories and Persons with Disability candidates belonging to Maharashtra State only) can also apply for the BTech course. 

Sigma Group of Institutes offers Degree and Diploma courses including 17 UG and 11 PG courses. Additionally, it also has After 10th Diploma courses. These programs are offerred in Full Time mode. Sigma Group of Institutes has specializations such as B.Sc. specializations in Chemistry, Microbiology, M.Sc. specializations in Microbiology, Chemistry, After 10th Diploma specializations in Information Technology, Chemical Engineering, Automobile Engineering, Civil Engineering, Computer Science Engineering, Electrical Engineering, Mechanical Engineering, GNM specializations in General Nursing & Midwifery, B.Tech specializations in Civil Engineering, Computer Science Engineering, Electrical Engineering, Electronics & Communication Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, M.E./M.Tech specializations in Electrical Engineering, Computer Science Engineering, Mechanical Engineering, M.Pharma specializations in Quality Assurance , Pharmaceutical, and ANM specializations in Auxiliary Nurse & Midwife..