B.Tech Mechatronics Engineering Colleges in India

Yes, Indian national candidates must pass HSC or its equivalent examination with Physics and Mathematics as compulsory subjects along with one of the Chemistry or Biotechnology or Biology or Technical Vocational subject or Computer Science or Information Technology or Informatics Practices or Agriculture or Engineering Graphics or Business Studies with at least 45% aggregate (40% aggregate, in case of Backward class categories and Persons with Disability candidates belonging to Maharashtra State only) in the above subjects taken together to apply for BTech course. The preference shall be given to the candidate obtaining non-zero positive score in JEE Mains Paper-I over the candidates who obtained a non-zero score in MGMU-CET/ MHT CET/ PERA CET. Aspirants who have passed Diploma in Engineering and Technology with at least 45% aggregate 40% aggregate, in case of Backward Class categories and Persons with Disability candidates belonging to Maharashtra State only) can also apply for the BTech course. 

Median salary of B.E. / B.Tech course is INR 410,000 as per the reports/data available.

Mahatma Gandhi Institute of Technology has courses such as B.Tech, M.E./M.Tech which are primarily in the stream of Engineering. Mahatma Gandhi Institute of Technology has specializations such as B.Tech specializations in Civil Engineering, Electronics & Communication Engineering, Computer Science Engineering, Information Technology, Mechanical Engineering, Metallurgical Engineering, Electrical Engineering, Mechatronics Engineering, M.E./M.Tech specializations in Computer Science Engineering, Mechatronics Engineering, Power Engineering, Structural Engineering, Electronics & Communication Engineering, Artificial Intelligence & Machine Learning.

Yes, SVVV accepts Class 12 scores for UG course admission. The college offers UG courses, i.e., , BDes, BTech, BFA, etc. The selection criteria is entrance-based or merit-based as per course requirement. The basic eligibility for UG course admission is to complete Class 12. 

As per Shiksha verified reviews, Padmabhushan Vasantdada Patil Pratishthan College of Engineering has an impressive review rating of 3.46 by 91 students.

Courses offered by New Horizon Institute of Technology & Management are B.Tech. These courses are in the stream of Engineering. New Horizon Institute of Technology & Management offers specializations such as B.Tech specializations in Electronics Engineering, Computer Science Engineering, Civil Engineering, Mechanical Engineering, Mechatronics Engineering.

Yes, Uka Tarsadia really supports students with placement training. They arrange placement drives and internship chances also. If student use these well then they get more confidence to crack real interviews easy.

Shri Vishwakarma Skill University (SVSU) is a relatively new university set up to cognizance ability-based education in various fields. When thinking about any university or college for B.Tech in Computer Science Engineering (CSE) with a specialization in Artificial Intelligence (AI), it is essential to evaluate numerous elements: Accreditation: Ensure that the university is identified and permitted by using the relevant instructional our bodies. This guarantees that the curriculum meets the required standards and is identified via employers and different institutions.

Students must note that CIET admissions are conducted based on entrance-test scoring obtained by the candidates. The prescribed entrance exam for CIET BTech and BE courses is the Tamil Nadu Engineering Admissions (TNEA) Counselling. Students seeking MBA admissions would be required to present scoring obtained in various Management tests like CAT, XAT, CMAT, etc.

Yes. Assam CEE syllabus is similar to the 12th board qualifying examination syllabus. The authorities conduct Assam CEE as per the the latest syllabus of Assam Higher Secondary Education Council/NCERT. The units and topics of Physics, Chemistry and Mathematics of Assam CEE is similar to the ones that the students study in the 11th and 12th standard qualifying examination.

Echelon Institute of Technology admission 2025 is currently open. To get admission to the Echelon Institute of Technology, candidates must meet the eligibility criteria set by the institute. Echelon Institute of Technology's application process 2025 is online. Candidates can check the list of documents required for admission at the college below:

• Scanned Class 10, Class 12 and graduation mark sheet
• Leaving Certificate
• Aadhaar Card
• Passport-size photograph
• Signature

G H Patel College of Engineering and Technology cutoff 2024 has been released across various specialisations in opening and closing ranks. G H Patel College of Engineering and Technology BTech cutoff 2024 ranged between 2690 and 38137 for the General HS category candidates, wherein BTech in CE is the most competitive course. The easiest BTech specialisation to secure admission in is B.Tech. in Civil Engineering. For a detailed G H Patel College of Engineering and Technology branch-wise cutoff 2024, candidates can refer to the table below for the Round 1 cutoff. The cutoff mentioned below is for the General category under the HS Quota.

Course	2024
B.Tech in Electronics and Communication Engineering	8821
B.Tech in Information Technology	3866
B.Tech in Computer Engineering	2690
B.Tech. in Computer Science and Design	5943
B.Tech. in Computer Science and Engineering (Internet of Things)	4909

Dr Mahalingam College of Engineering and Technology offers good placements annually for its BTech, M.Tech and MCA courses. The key highlights of Dr Mahalingam College of Engineering and Technology placements for the Class of 2023 and 2024 are tabulated below:

Particulars	Placement Statistics (2023)	Placement Statistics (2024)
the highest package	INR 8.50 LPA	INR 13 LPA
Average package	NA	INR 4.80 LPA
Total recruiters	95	190
Total students on roll	919	792
Total students placed	615	472
Placement percentage	79%	78%

Note: The placements are going on for the academic year 2023-2024. The above-mentioned data may vary once the placement report 2024 is out.

NCERC KEAM Cutoff 2024 was released for Round 1 for BTech admission. The cutoff was released for different categories under the HS quota. For the General HS category candidates, the cutoff ranks ranged between 29420 and 51241. The most competitive course for the General HS category was BTech in CSE. Candidates can refer to the table below to check the cutoff ranks for the General HS category candiates.

Course	2024
B.Tech. in Electronics and Communication Engineering	38852
B.Tech. in Electrical and Electronics Engineering	51241
B.Tech. in Computer Science and Engineering	29420
B.Tech. in Mechatronics Engineering	47459
B.Tech. in Computer Science and Engineering (Artificial Intelligence and Machine Learning)	35465

Median salary of B.E. / B.Tech course is INR 380,000 as per the reports/data available.

Chitkara College of Applied Engineering offers one course i.e. B.E. as an undergraduate course. The college provides various specialisations in B.E. Here's a table explaining the percentage criteria of B.E. programmes at Chitkara College of Applied Engineering:

Course	Eligibility
B.E.	Class 10 and Class 12 with 60% aggregate from a recognised board

PSG Institute of Advanced Studies accept course fee payment on a yearly basis. If the candidate is wanting to pay full course fee, then that can be discussed with the college admission office. The fee payment is further accepted by demand draft/bank transfer (NEFT/RTGS). PSGIAS BE/BE (H) tuition fee ranges between INR 6.9 Lacs and INR 13.9 lakh. This fee amount is taken from the official website/sanctioning body. It is still subject to changes and hence, is indicative.

MMIT Pune offers 100% placement assurance to students and has signed MOUs with 25+ industries to benefit students and the institute's growth. During the 2024 drive, the highest package bagged was INR 8 LPA. The table below mentions MMIT Pune the highest package for reference:

Particulars	Placement Statistics (2024)
the highest package	INR 8 LPA

Joy University offers BTech, BSc, MBA, etc., at the UG and PG levels. Apart from the UG and PG courses, the university also offers PhD coures. The selection criteria are entrance-based. The mode of study of the programme is full-time. Students can check the table below to know course-wise total tuition fee at Joy University:

Course	Total Tuition Fee
MBA	INR 4 Lacs - INR 7.6 lakh
BSc	INR 1.5 lakh-INR 6 lakh
BDes	INR 6 lakh
MCA	INR 1.6 Lacs - INR 2.6 lakh
MBA	INR 3 lakh-INR 4 lakh

Note: This information is sourced from official website/ sanctioning body and is subject to change.

Jyothi Engineering College provides programmes including B.E. / B.Tech, M.E./M.Tech in streams such as Engineering, IT & Software, and are excellent for students to build their careers. The institute has specializations in Computer Science Engineering, Civil Engineering, Electrical Engineering, Communications Engineering, Robotics Engineering, Electronics Engineering, Transportation Engineering, Electronics & Communication Engineering, Mechanical Engineering, Mechatronics Engineering.

Nirmala College of Engineering provides programmes including After 10th Diploma, MBA/PGDM, B.E. / B.Tech in streams such as Engineering, Business & Management Studies, and are excellent for students to build their careers. The institute has specializations in Automobile Engineering, Chemical Engineering, Civil Engineering, Mechanical Engineering, Electronics & Communication Engineering, Production Engineering, Computer Science Engineering, Mechatronics Engineering, Food Technology.

As per Shiksha verified reviews, Yashoda Technical Campus has an impressive review rating of 3.71 by 9 students.

College of Engineering, Shivnagar Vidya Prasarak Mandal's is a good institution for B.E. / B.Tech, M.E./M.Tech courses, and these programs are delivered by highly experienced faculty. Major specialisation at College of Engineering, Shivnagar Vidya Prasarak Mandal's are Civil Engineering, Mechanical Engineering, Electronics & Communication Engineering, Computer Science Engineering, Electrical Engineering, Information Technology.